component
HT8097ARTZ
Public Made by Adomby adom
HTCSEMI DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT8097ARTZ
HTCSEMI · DC-DC Converters · SOT-23-5
HT8097ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control input: a logic-high (VIH min 1.5V) enables the converter and a logic-low (VIL max 0.4V) forces shutdown mode. |
| 2 | GND | power_in | Power ground return for the converter. |
| 3 | LX | output | Switch node connecting the internal high-side and low-side power MOSFETs to the output inductor. |
| 4 | VIN | power_in | Supply voltage input; the HT8097A operates from a 2.7V to 5.5V input. |
| 5 | FB | input | Feedback voltage input; an external resistor divider from the output to GND tapped at FB sets the output voltage against the 0.6V reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Input Voltage | 2.7 | 5.5 | V | 5 | |||
| Ambient Temperature Range | -40 | 85 | °C | 5 | |||
| Junction Temperature Range | -40 | 125 | °C | 5 | |||
| Supply Input Voltage | -0.3 | 6.5 | V | 5 | |||
| Junction Temperature | -40 | 150 | °C | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 5 | |||
| ESD Susceptibility HBM | 2 | kV | Human Body Model (HBM) | 5 | |||
| Junction to Ambient Thermal Resistance | JA | 230.6 | °C/W | SOT-23-5, standard four-layer thermal test board | 13 | ||
| Input Voltage | VIN | 2.7 | 5.5 | V | 5 | ||
| Feedback Reference Voltage | VREF | 0.588 | 0.6 | 0.612 | V | 5 | |
| Feedback Leakage Current | IFB | 1 | µA | VFB = 3.3V | 5 | ||
| DC Bias Current Shutdown | 1 | µA | Shutdown | 5 | |||
| Switching Leakage Current | 1 | µA | 5 | ||||
| Enable Input Voltage Logic-High | VIH | 1.5 | V | Logic-High | 5 | ||
| Enable Input Voltage Logic-Low | VIL | 0.4 | V | Logic-Low | 5 | ||
| Under-Voltage Lockout Threshold Rising | VUVLO | 2.25 | 2.5 | V | VDD Rising | 5 | |
| PG Open-Drain Impedance | 100 | Ω | PG = low | 6 | |||
| DC Bias Current Active | 22 | µA | VFB = 0.63V, Not Switching | 5 | |||
| Switching Frequency | 1 | MHz | 5 | ||||
| Switch On Resistance Low | RNMOS | 80 | mΩ | ISW = 0.3A | 5 | ||
| Switch On Resistance High | RPMOS | 110 | mΩ | ISW = 0.3A | 5 | ||
| Valley Current Limit | ILIM | 3.2 | A | 5 | |||
| Under-Voltage Lockout Threshold Falling | VUVLO | 2 | V | VDD Falling | 5 | ||
| Over-Temperature Threshold | 150 | °C | 5 | ||||
| PG Pin Threshold Rising | 90 | % | Relative to VOUT, Rising | 6 | |||
| PG Pin Threshold Falling | 85 | % | Relative to VOUT, Falling | 6 | |||
| Soft-Start Time | TSS | 1.2 | ms | 6 | |||
| Minimum Off Time | 120 | ns | 6 | ||||
| Output Discharge Switch On Resistance | 1.8 | kΩ | 6 |
CAD (KiCad official)
- Symbol:
HT8097ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ht8097artz-etched.step/ht8097artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht8097artz.step/ht8097artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (15 pp, sha256
546a8b500ecab481, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).