main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ht7850-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ht7850-a: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs changed)) · Ray
ht7850-a-etched.fit.json ht7850-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht7850-a-etched.glb ht7850-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht7850-a-etched.step ht7850-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht7850-a-hero.glb ht7850-a: hero from the plain model · Ray
ht7850-a-hero.overlay.json ht7850-a: hero from the plain model · Ray
ht7850-a.glb Publish 0.1.0 · Ray
ht7850-a.kicad_mod ht7850-a: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs changed)) · Ray
ht7850-a.kicad_sym Publish 0.1.0 · Ray
ht7850-a.lbr ht7850-a: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs changed)) · Ray
ht7850-a.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.1 · Ray
README.md ht7850-a: specified limits as data (metadata.characteristics, 13 rows from the datasheet) · Ray

HT7850-A

UMW · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3

HT7850-A from UMW, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground reference. All output and input voltages are referenced to this pin.
3 VIN power_in Supply voltage input. Accepts up to 12 V typical (15 V absolute maximum). Should be decoupled to GND with a bypass capacitor close to the pin.
2 VOUT power_out Regulated 5.0 V output (±3% tolerance, 2.5 V variant: 2.425-2.575 V range shown for 7825; 7850-A regulates to 5.0 V). Sources up to 450 mA. Requires an output capacitor to GND for stability.

Key specifications

Parameter Value
Manufacturer UMW
Package SOT-89-3
Category PMIC
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 4.85 5 5.15 V VIN=6V, IOUT=40mA 7
Output Current IOUT 45 450 mA VIN=6V, IOUT≥4.5V 7
Drop Voltage VDIF 90 mV IOUT=40mA 7
Quiescent Current ISS 2 3 µA VIN=6V, No Load 7
Line Regulation ΔVOUT/(ΔVIN*VOUT) 0.2 0.3 %/V 6V≤VIN≤12V, IOUT=40mA 7
Input Voltage VIN 12 V 7
Temperature Coefficient ΔVOUT/ΔTA -0.7 0.7 mV/°C VIN=6V, IOUT=40mA, 0°C≤TA≤85°C 7
Supply Voltage Range VIN -0.5 15 V 3
Consumption Power PD 400 mW 3
Junction Temperature TJ 125 °C 3
Operating Temperature TOP -40 85 °C 3
Welding Temperature Th 260 °C 10s 3
Load Regulation ΔVOUT 60 mV VIN=6V, 1mA≤IOUT≤60mA 7

CAD (KiCad official)

  • Symbol: HT7850-A
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3 (KiCad packages3D, STEP)
  • 3D model files: ht7850-a-etched.step / ht7850-a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht7850-a.step / ht7850-a.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ht7850-a.step 57 KB You want the bare part, or you mark your own boards.
ht7850-a-etched.step 1.0 MB You want the part with HT7850-A already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 290 faces against 42 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (12 pp, sha256 0ddd2116b6d87a09, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF