main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ht7830-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ht7830-a: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs changed)) · Ray
ht7830-a-etched.fit.json ht7830-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht7830-a-etched.glb ht7830-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht7830-a-etched.step ht7830-a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht7830-a-hero.glb ht7830-a: hero from the plain model · Ray
ht7830-a-hero.overlay.json ht7830-a: hero from the plain model · Ray
ht7830-a.glb Publish 0.1.0 · Ray
ht7830-a.kicad_mod ht7830-a: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs changed)) · Ray
ht7830-a.kicad_sym Publish 0.1.0 · Ray
ht7830-a.lbr ht7830-a: one-pass backfill (courtyard 25.5 -> 22.62 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs changed)) · Ray
ht7830-a.step Publish 0.1.0 · Ray
package.json Publish 0.2.2 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.2 · Ray
README.md ht7830-a: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

HT7830-A

UMW · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3

HT7830-A from UMW, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground return. All voltages (VIN, VOUT) are referenced to this pin.
3 VIN power_in Unregulated supply input. Absolute max 15 V (recommended operating up to 12 V). For 3.0 V output, VIN must be ≥ ~4 V (dropout ~100 mV at 40 mA). A small input decoupling capacitor to GND is recommended.
2 VOUT power_out Regulated 3.0 V output (±3% tolerance, 2.91-3.09 V). Delivers up to 450 mA. An output capacitor to GND is required for stability.

Key specifications

Parameter Value
Manufacturer UMW
Package SOT-89-3
Category PMIC
Pins 3

CAD (KiCad official)

  • Symbol: HT7830-A
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3 (KiCad packages3D, STEP)
  • 3D model files: ht7830-a-etched.step / ht7830-a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht7830-a.step / ht7830-a.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ht7830-a.step 57 KB You want the bare part, or you mark your own boards.
ht7830-a-etched.step 1.1 MB You want the part with HT7830-A already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 297 faces against 42 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (12 pp, sha256 0ddd2116b6d87a09, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF