main
History Download
Ray ht7126anz: README CAD lines name the land and model on the page (Package_DIP:DIP-40_W15.24mm) eb97489

HT7126ANZ

HTCSEMI · Analog To Digital Converters (ADCs) · DIP-40

HT7126ANZ from HTCSEMI, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Positive power supply pin; V+ to V- is limited to 15V absolute maximum and a single 9V supply is typical.
2 D1 output Output driver pin for segment D of the display units digit.
3 C1 output Output driver pin for segment C of the display units digit.
4 B1 output Output driver pin for segment B of the display units digit.
5 A1 output Output driver pin for segment A of the display units digit.
6 F1 output Output driver pin for segment F of the display units digit.
7 G1 output Output driver pin for segment G of the display units digit.
8 E1 output Output driver pin for segment E of the display units digit.
9 D2 output Output driver pin for segment D of the display tens digit.
10 C2 output Output driver pin for segment C of the display tens digit.
11 B2 output Output driver pin for segment B of the display tens digit.
12 A2 output Output driver pin for segment A of the display tens digit.
13 F2 output Output driver pin for segment F of the display tens digit.
14 E2 output Output driver pin for segment E of the display tens digit.
15 D3 output Output driver pin for segment D of the display hundreds digit.
16 B3 output Output driver pin for segment B of the display hundreds digit.
17 F3 output Output driver pin for segment F of the display hundreds digit.
18 E3 output Output driver pin for segment E of the display hundreds digit.
19 AB4 output Output driver pin for both A and B segments of the display thousands digit.
20 POL output Output driver pin for the negative sign of the display, on for negative analog inputs.
21 BP/GND output Output driver pin for the LCD backplane (also listed as power supply ground), with about 5V nominal square-wave amplitude at 60Hz for three readings/second.
22 G3 output Output driver pin for segment G of the display hundreds digit.
23 A3 output Output driver pin for segment A of the display hundreds digit.
24 C3 output Output driver pin for segment C of the display hundreds digit.
25 G2 output Output driver pin for segment G of the display tens digit.
26 V- power_in Negative power supply pin.
27 INT output Integrator amplifier output, to be connected to the integrating capacitor.
28 BUFF output Input buffer amplifier output, to be connected to the integrating resistor.
29 A-Z input Integrator amplifier input, to be connected to the auto-zero capacitor.
30 IN LO input Differential input low, to be connected to the input voltage to be measured; common mode range is within 1V of either supply.
31 IN HI input Differential input high, to be connected to the input voltage to be measured; common mode range is within 1V of either supply.
32 COMMON bidirectional Analog common and internal voltage reference output, about 2.8V below the positive supply, sinking about 3mA with only 10uA source current.
33 CREF- passive Connection pin for the reference capacitor (negative side).
34 CREF+ passive Connection pin for the reference capacitor (positive side).
35 REF LO input Input pin for the reference voltage; REF HI should be positive with respect to REF LO.
36 REF HI input Input pin for the reference voltage; REF HI should be positive with respect to REF LO.
37 TEST input Display test input that turns on all segments when tied to V+; also coupled to the internal digital supply through 500 ohms with no more than 1mA load.
38 OSC3 output Device clock generator circuit connection pin.
39 OSC2 output Device clock generator circuit connection pin.
40 OSC1 input Device clock generator circuit connection pin; also the external oscillator input.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package DIP-40
Category Data Converters
Pins 40

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage V+ to V- 15 V HT7126A, V+ to V- 3
Maximum Junction Temperature 150 °C 3
Storage Temperature Range -65 150 °C 3
Lead Temperature (Soldering 10s) 300 °C Soldering 10s 3
Operating Temperature Range 0 70 °C Operating Conditions 3
Ambient Temperature Range (ordering) TA -45 85 °C for all packages 1
Thermal Resistance PDIP θJA 50 °C/W Typical, Note 2 3
Zero Input Reading 0 0 0 Digital Reading VIN = 0V, Full Scale = 200mV 3
Ratiometric Reading 999 1000 Digital Reading VIN = VREF, VREF = 100mV 3
Rollover Error 0.2 1 Counts -VIN = +VIN ≈ 200mV, difference in reading for equal positive and negative inputs near full scale 3
Linearity 0.2 1 Counts Full Scale = 200mV or 2V, max deviation from best straight line fit (Note 5) 3
Common Mode Rejection Ratio CMRR 50 µV/V VCM = 1V, VIN = 0V, Full Scale = 200mV (Note 5) 3
Noise 15 µV VIN = 0V, Full Scale = 200mV (peak-to-peak not exceeded 95% of time) (Note 5) 3
Leakage Current Input 1 10 pA VIN = 0V (Note 5) 3
Zero Reading Drift 0.2 1 µV/°C VIN = 0V, 0°C to 70°C (Note 5) 3
Scale Factor Temperature Coefficient 1 5 ppm/°C VIN = 199mV, 0°C to 70°C, (Ext. Ref. 0ppm/°C) (Note 5) 3
Analog Common Voltage 2.4 3 3.2 V 25kΩ between Common and positive supply (with respect to + supply) 3
Temperature Coefficient of Analog Common 150 ppm/°C 25kΩ between Common and positive supply (with respect to + supply) (Note 5) 3
V+ Supply Current 70 100 µA VIN = 0 (does not include common current) 16kHz oscillator (Note 6) 3
Peak-To-Peak Segment Drive Voltage and Backplane Drive Voltage 4 5.5 6 V V+ to V- = 9V (Note 4) 3

CAD (KiCad official)

  • Symbol: HT7126ANZ
  • Footprint: Package_DIP:DIP-40_W15.24mm
  • 3D model: DIP-40_W15.24mm (KiCad packages3D, STEP)
  • 3D model files: ht7126anz-etched.step / ht7126anz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht7126anz.step / ht7126anz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (15 pp, sha256 cb8d340acea58694, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF