3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT5532ARZ
HTCSEMI · Operational Amplifier · SOP-8
HT5532ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A OUTPUT | output | Output of amplifier A; the device output current rating is ±50 mA maximum (absolute maximum). |
| 2 | A -INPUT | input | Inverting input of amplifier A; the input voltage absolute maximum is ±15 V (for supplies of ±15 V or more) and the differential input voltage is ±30 V. |
| 3 | A +INPUT | input | Non-inverting input of amplifier A; the common-mode input voltage range is ±12 V minimum and ±13.5 V typical at ±15 V supplies. |
| 4 | V- | power_in | Negative supply pin; the operating supply range is ±2 V to ±18 V. |
| 5 | B +INPUT | input | Non-inverting input of amplifier B; the common-mode input voltage range is ±12 V minimum and ±13.5 V typical at ±15 V supplies. |
| 6 | B -INPUT | input | Inverting input of amplifier B; the input voltage absolute maximum is ±15 V (for supplies of ±15 V or more) and the differential input voltage is ±30 V. |
| 7 | B OUTPUT | output | Output of amplifier B; the device output current rating is ±50 mA maximum (absolute maximum). |
| 8 | V+ | power_in | Positive supply pin; the operating supply range is ±2 V to ±18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VIO | 0.5 | 1 | mV | RS≤10kΩ | 2 | |
| Input Offset Current | IIO | 5 | 200 | nA | 2 | ||
| Input Bias Current | IB | 100 | 500 | nA | 2 | ||
| Large Signal Voltage Gain | AV | 90 | 110 | dB | RL≥2kΩ,VO=±10V | 2 | |
| Output Voltage Swing | VOM | 12 | 13.5 | V | RL≥2kΩ | 2 | |
| Input Common Mode Voltage Range | VICM | 12 | 13.5 | V | 2 | ||
| Common Mode Rejection Ratio | CMR | 80 | 110 | dB | RS≤10kΩ | 2 | |
| Supply Voltage Rejection Ratio | SVR | 80 | 110 | dB | RS≤10kΩ | 2 | |
| Operating Current | ICC | 6 | 9 | mA | 2 | ||
| Slew Rate | SR | 5 | V/µs | RL≥2kΩ | 2 | ||
| Gain Bandwidth Product | GB | 10 | MHz | f=10kHz | 2 | ||
| Total Harmonic Distortion | THD | 0.0005 | % | AV=20dB,VO=5V,RL=2kΩ,f=1kHz | 2 | ||
| Input Noise Voltage | VNI | 0.8 | µVrms | RIAA,RS=2.2kΩ,30kHz LPF | 2 | ||
| Supply Voltage | V+/V- | -18 | 18 | V | 2 | ||
| Input Voltage | VIC | -15 | 15 | V | Note: for supply less than ±15V, rating equals supply voltage | 2 | |
| Differential Input Voltage | VID | -30 | 30 | V | 2 | ||
| Output Current | IO | -50 | 50 | mA | 2 | ||
| Power Dissipation | PD | 300 | mW | SOP8 package; Ta=25˚C | 2 | ||
| Operating Temperature Range | Topr | -40 | 85 | ˚C | 2 | ||
| Storage Temperature Range | Tstg | -40 | 125 | ˚C | 2 | ||
| Operating Voltage | V+/V- | 2 | 18 | V | Features list: ±2V~±18V | 1 |
CAD (KiCad official)
- Symbol:
HT5532ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht5532arz-etched.step/ht5532arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht5532arz.step/ht5532arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (5 pp, sha256
43bf7c1ac3efb9e5, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).