main
Ray
ht4084artz: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b423987
HT4084ARTZ
HTCSEMI · Battery Management · SOT-23-5
HT4084ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Charge indicator pin, open-drain. Connect to the cathode of an LED (anode to VCC via ~1K resistor). Pin is pulled low during charging to light the LED (5mA drive typical); high-Z when charging completes. |
| 2 | GND | power_in | Device ground reference. |
| 3 | BAT | power_out | Battery charge current output. Connect to Li-ion battery positive terminal. Requires at least 10uF ceramic bypass capacitor to GND. Regulated float voltage 4.2V (typ), 4.15-4.25V. |
| 4 | VCC | power_in | Supply input from USB / AC adapter. Recommended operating range 4-6V (typ 5V); UVLO ~4.0V rising / 3.9V falling; input OVP at 6.25V; absolute max 24V (survives 28V surge). Bypass with >=10uF ceramic close to VCC/GND. |
| 5 | PROG | passive | Constant-current programming and charge-current monitor pin. Connect a 1% resistor RPROG to GND to set ICC per IBAT = (VPROG / RPROG) x 1000. Voltage on this pin is 0.05V in SC mode, 0.1V in TC mode, and 1V in CC mode. Example: RPROG = 2K sets ~500mA; 10K sets ~100mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
HT4084ARTZHT4084ARTZBRTZ
CAD (KiCad official)
- Symbol:
HT4084ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ht4084artz-etched.step/ht4084artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht4084artz.step/ht4084artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (11 pp, sha256
28e90be167683757, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT4084ARTZ
**HTCSEMI** · Battery Management · SOT-23-5
HT4084ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Charge indicator pin, open-drain. Connect to the cathode of an LED (anode to VCC via ~1K resistor). Pin is pulled low during charging to light the LED (5mA drive typical); high-Z when charging completes. |
| 2 | GND | power_in | Device ground reference. |
| 3 | BAT | power_out | Battery charge current output. Connect to Li-ion battery positive terminal. Requires at least 10uF ceramic bypass capacitor to GND. Regulated float voltage 4.2V (typ), 4.15-4.25V. |
| 4 | VCC | power_in | Supply input from USB / AC adapter. Recommended operating range 4-6V (typ 5V); UVLO ~4.0V rising / 3.9V falling; input OVP at 6.25V; absolute max 24V (survives 28V surge). Bypass with >=10uF ceramic close to VCC/GND. |
| 5 | PROG | passive | Constant-current programming and charge-current monitor pin. Connect a 1% resistor RPROG to GND to set ICC per IBAT = (VPROG / RPROG) x 1000. Voltage on this pin is 0.05V in SC mode, 0.1V in TC mode, and 1V in CC mode. Example: RPROG = 2K sets ~500mA; 10K sets ~100mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `HT4084ARTZ`
- `HT4084ARTZBRTZ`
## CAD (KiCad official)
- Symbol: `HT4084ARTZ`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ht4084artz-etched.step` / `ht4084artz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht4084artz.step` / `ht4084artz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht4084artz-datasheet.pdf) (11 pp, sha256 `28e90be167683757`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht4084artz-datasheet.pdf)