main
Ray ht3808g01rtz: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… ae83220
{
  "slug": "ht3808g01rtz",
  "version": "0.1.0",
  "type": "component",
  "description": "HTCSEMI Supervisor and Reset ICs, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ht3808g01rtz"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ht3808g01rtz.kicad_sym",
    "ht3808g01rtz.kicad_mod",
    "ht3808g01rtz.glb",
    "ht3808g01rtz.step",
    "ht3808g01rtz.lbr",
    "docs/hero.png",
    "docs/ht3808g01rtz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ht3808g01rtz-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HT3808G01RTZ",
    "manufacturer": "HTCSEMI",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Supervisor and Reset ICs",
    "parts": {
      "symbol": "ht3808g01rtz.kicad_sym",
      "footprint": "ht3808g01rtz.kicad_mod",
      "model_3d": "ht3808g01rtz-etched.glb",
      "model_3d_plain": "ht3808g01rtz.glb",
      "model_3d_step": "ht3808g01rtz-etched.step",
      "model_3d_step_plain": "ht3808g01rtz.step",
      "lbr": "ht3808g01rtz.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "RESET",
        "type": "output",
        "description": "Open-drain active-low RESET output. Driven to a low-impedance state when SENSE is below VIT (0.405V nominal for the G01 variant) or MR is low. Remains asserted for the programmed reset delay (tD) after both SENSE rises above VIT+VHYS and MR returns high. Requires an external pull-up resistor of 10kΩ to 1MΩ; may be pulled up to a voltage higher than VDD (up to 6.5V). Undefined below VDD ≈ 0.8V. IRESET max = 5 mA."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "3",
        "name": "MR",
        "type": "input",
        "description": "Active-low manual reset input. Driving MR low (VIL ≤ 0.3·VDD) asserts RESET. Internally tied to VDD through a 90kΩ (typ) pull-up so the pin may be left unconnected if unused. VIH ≥ 0.7·VDD; propagation delay MR→RESET ≈ 150ns."
      },
      {
        "number": "4",
        "name": "CT",
        "type": "passive",
        "description": "Reset delay programming pin. Leaving CT open gives a fixed ~20ms delay; tying CT to VDD through a 40kΩ-200kΩ resistor gives a ~300ms delay; connecting a ground-referenced capacitor ≥100pF gives a user-programmable delay from 1.25ms to 10s per CT(nF) = [tD(s) − 0.5×10⁻³] × 175. Charged by an on-chip 220nA current source to 1.23V. Use a low-leakage (ceramic) capacitor."
      },
      {
        "number": "5",
        "name": "SENSE",
        "type": "input",
        "description": "Voltage-monitor input. RESET is asserted when V(SENSE) drops below VIT (0.405V nominal for HT3808G01; use an external divider R1+R2 = 4MΩ on the SENSE node to program a higher threshold: VIT' = (1 + R1/R2)·0.405V). Built-in hysteresis (VHYS ≈ 3%·VIT for G01). Recommend 1nF-10nF bypass to reduce sensitivity to transients. ISENSE = ±25nA max (G01) at VSENSE = VIT."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input, 1.8V to 6.5V operating range (absolute max −0.3V to +7.0V). Typical quiescent current 2.4µA at 3.3V. Place a 0.1µF ceramic bypass capacitor close to this pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C47326424",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:00:33Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "ht3808g01rtz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ht3808g01rtz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "254ba640392f4ef12787331c146c1825c8e420c1b5e3702a8f623b7d2d3ca01f",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}