component
HT3715ARTZ
Public Made by Adomby adom
HTCSEMI DC-DC Converters, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownHT3715ARTZ
HTCSEMI · DC-DC Converters · SOT-23-6
HT3715ARTZ from HTCSEMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Power Switch Output. SW is the drain of the internal NMOS power MOSFET (60mΩ typ, 19V abs max). Connect the power inductor and output rectifier (Schottky) to this pin. |
| 2 | GND | power_in | Ground pin. Analog and power ground return for the device; connect to a single-point ground plane with the feedback divider ground. |
| 3 | FB | input | Feedback Input to the internal error amplifier. Regulated to 0.6V (588mV/600mV/612mV min/typ/max). Connect an external resistor divider from VOUT to FB to GND to program the output voltage: VOUT = 0.6V × (R1+R2)/R2. |
| 4 | EN | input | Regulator On/Off Control Input. Drive high (rising threshold ≥1.2V) to enable the converter; drive low (falling threshold ≤0.8V) to shut it down (<1µA input current). Tie to IN for automatic startup. Abs max 6V. |
| 5 | IN | power_in | Input Supply Pin. Operating range 2.3V to 5.5V (abs max 6V). Bypass with a ceramic capacitor (≥1.0µF, typ 22µF/25V) placed close to the pin. |
| 6 | NC | unconnected | Not Connection. No internal bond; leave floating or tie to any convenient node per PCB layout. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
HT3715ARTZ
CAD (KiCad official)
- Symbol:
HT3715ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ht3715artz-etched.step/ht3715artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht3715artz.step/ht3715artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (11 pp, sha256
73ebefd0b9e2a8c9, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).