Generated by kicad-footprint-generator · KiCad file format 20260206
HT33039ARZ
HTCSEMI · Motor Driver ICs · SOP-8
HT33039ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | φC | input | TTL-compatible rotor position sensor input C with hysteresis (VIH 2.1 V typ, VIL 1.4 V typ); logic input current max 5.0 mA. |
| 2 | φB | input | TTL-compatible rotor position sensor input B with hysteresis; each transition is digitally detected and triggers the monostable, logic input current max 5.0 mA. |
| 3 | φA | input | TTL-compatible rotor position sensor input A with hysteresis; logic input current max 5.0 mA. |
| 4 | φA (inverter output) | output | Inverter output of φA used to convert between 60°/300° and 120°/240° sensor phasing; source/sink current max 20 mA. |
| 5 | fout | output | Monostable output pulse train of fixed amplitude and width set by RT and CT, whose average voltage rises with motor speed; source/sink current max 20 mA. |
| 6 | RT/CT | passive | Timing resistor and capacitor connection that programs the output pulse width (225 µs typ at RT = 10 k, CT = 22 nF). |
| 7 | GND | power_in | Ground reference for the device. |
| 8 | VCC | power_in | Supply input, operating from 5.5 V up to the 8.25 V typ internal shunt regulator voltage (VZ 7.5 to 9.0 V), zener current max 30 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Zener Current | IZ(VCC) | 30 | mA | 2 | |||
| Logic Input Current (Pins 1, 2, 3) | IIH | 5 | mA | 2 | |||
| Output Current (Pins 4, 5), Sink or Source | IDRV | 20 | mA | 2 | |||
| Maximum Power Dissipation | PD | 650 | mW | TA = +85°C | 2 | ||
| Thermal Resistance, Junction-to-Air | RJA | 100 | °C/W | 2 | |||
| Operating Junction Temperature | TJ | 150 | °C | 2 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | HT33039A | 2 | |
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Input Current High State φA | IIH | -40 | -60 | -80 | A | VIH = 5.0 V | 2 |
| Input Current High State φB, φC | IIH | -190 | -300 | -380 | A | VIH = 5.0 V | 2 |
| Input Current Low State φA | IIL | -0.3 | -5 | A | VIL = 0 V | 2 | |
| Input Current Low State φB, φC | IIL | -0.3 | -5 | A | VIL = 0 V | 2 | |
| Output Voltage High State fout | VOH | 3.6 | 3.95 | 4.2 | V | Isource = 5.0 mA | 2 |
| Output Voltage High State φA | VOH | 4.2 | 4.75 | V | Isource = 2.0 mA | 2 | |
| Output Voltage Low State fout | VOL | 0.25 | 0.5 | V | Isink = 10 mA | 2 | |
| Output Voltage Low State φA | VOL | 0.25 | 0.5 | V | Isink = 10 mA | 2 | |
| Capacitor CT Discharge Current | Idischg | 20 | 35 | 60 | mA | 2 | |
| Output Pulse Width (Pin 5) | tPW | 205 | 225 | 245 | s | 2 | |
| Power Supply Operating Voltage Range | VCC | 5.5 | V | HT33039A (TA = −40° to +85°C) | 2 | ||
| Power Supply Current | ICC | 1.8 | 3.9 | 5 | mA | 2 | |
| Zener Voltage | VZ | 7.5 | 8.25 | 9 | V | IZ = 10 mA | 2 |
| Zener Dynamic Impedance | /Zka/ | 2 | 5 | IZ = 10 mA to 20 mA, f 1.0 kHz | 2 |
CAD (KiCad official)
- Symbol:
HT33039ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht33039arz-etched.step/ht33039arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht33039arz.step/ht33039arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (6 pp, sha256
68ab079fc0e0f72e, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).