main
History Download
Ray Publish 0.1.0 a5591c5

HT324ARZ

HTCSEMI · Operational Amplifier · SOP-14

HT324ARZ from HTCSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT 1 output Output of op-amp 1, which swings from 0 V DC up to VCC-1.5 V.
2 IN1(-) input Inverting input of op-amp 1; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
3 IN1(+) input Non-inverting input of op-amp 1; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
4 VCC power_in Positive supply pin; the recommended DC supply voltage is 2.5 V to 15 V or 30 V, and the single-supply maximum rating is 32 V.
5 IN2(+) input Non-inverting input of op-amp 2; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
6 IN2(-) input Inverting input of op-amp 2; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
7 OUT 2 output Output of op-amp 2, which swings from 0 V DC up to VCC-1.5 V.
8 OUT 3 output Output of op-amp 3, which swings from 0 V DC up to VCC-1.5 V.
9 IN3(-) input Inverting input of op-amp 3; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
10 IN3(+) input Non-inverting input of op-amp 3; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
11 GND power_in Ground pin (device is specified for single or split supply operation, with GND as the reference at 0 V).
12 IN4(+) input Non-inverting input of op-amp 4; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
13 IN4(-) input Inverting input of op-amp 4; the input common-mode voltage range extends from ground to VCC-1.5 V at VCC=30 V.
14 OUT 4 output Output of op-amp 4, which swings from 0 V DC up to VCC-1.5 V.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-14
Category Amplifiers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Input Offset Voltage VIO 7 mV VCC=5.0-30V; RS=0Ω; VO=1.4V; VICR=0V - (VCC-1.5V); *TA=+25C 3
Maximum Input Offset Voltage VIO 9 mV VCC=5.0-30V; RS=0Ω; VO=1.4V; VICR=0V - (VCC-2.0V) 3
Maximum Input Offset Current IIO -50 50 nA VCC=5.0-30V, VO=1.4V; *TA=+25C 3
Maximum Input Offset Current IIO -150 150 nA VCC=5.0-30V, VO=1.4V 3
Maximum Input Bias Current IIB -250 nA VCC=5.0-30V, VO=1.4V; *TA=+25C 3
Maximum Input Bias Current IIB -500 nA VCC=5.0-30V, VO=1.4V 3
Input Common Mode Voltage Range (lower limit) VICR 0 V VCC=30V 3
Maximum Power Supply Current ICC 1.2 mA RL=∞, VCC=5V, V0=2.5V 3
Maximum Power Supply Current ICC 3 mA RL=∞, VCC=30V, V0=15V 3
Minimum Large Signal Open-Loop Voltage Gain AVOL 25 V/mV VCC=15V, RL≥2KΩ; *TA=+25C 3
Minimum Large Signal Open-Loop Voltage Gain AVOL 15 V/mV VCC=15V, RL≥2KΩ 3
Minimum Output High-Level Voltage Swing VOH 3.3 V VCC=5V, RL=2KΩ 3
Minimum Output High-Level Voltage Swing VOH 26 V VCC=30V, RL=2KΩ 3
Minimum Output High-Level Voltage Swing VOH 27 V VCC=30V, RL=10KΩ 3
Maximum Output Low-Level Voltage Swing VOL 20 mV VCC=5V, RL=10KΩ 3
Common Mode Rejection CMR 65 dB VCC=5-30V, RS=10K; *TA=+25C 3
Power Supply Rejection PSR 65 dB VCC=5-30V; *TA=+25C 3
Maximum Output Short Circuit to GND ISC 60 mA VCC=5.0V, VO=0V; *TA=+25C 3
Minimum Output Source Current IO+ 20 mA VCC=15V, VID-=1.0V; *TA=+25C 3
Minimum Output Sink Current IO-- 10 mA VID=-1.0V, VCC=15V, VO=15V; *TA=+25C 3
Minimum Output Sink Current IO-- 5 mA VID=-1.0V, VCC=15V, VO=15V 3
Minimum Output Sink Current IO-- 12 µA VID=-1.0V, VCC=15V, VO=0.2V; *TA=+25C 3
Maximum Power Supply Voltage (single supply) VCC 32 V Single supply 2
Maximum Power Supply Voltage (split supplies) VCC 16 V Split supplies 2
Input Differential Voltage Range VIDR 32 V Split power supplies (note 1) 2
Input Common Mode Voltage Range VICR -0.3 32 V 2
Short-Circuit Duration of Output ts 100 ms 2
Junction Temperature TJ 150 C Plastic packages 2
Storage Temperature Tstg -55 125 C Plastic packages 2
Input Current, per pin IIN 50 mA Per pin; VIN<-0.3V (note 2) 2
Lead Temperature TL 260 C 1mm from case for 10 seconds 2
DC Supply Voltage (single supply) VCC 2.5 30 V Single supply 2
DC Supply Voltage (split supplies) VCC 2.5 15 V Split supplies 2
Operating Temperature, All Package Types TA 0 70 C 2

CAD (KiCad official)

  • Symbol: HT324ARZ
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: ht324arz-etched.step / ht324arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht324arz.step / ht324arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (6 pp, sha256 246b90c3becc49bf, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF