Generated by kicad-footprint-generator · KiCad file format 20260206
HT2803ARWZ
HTCSEMI · Darlington Transistor Arrays · SOP-18-300mil
HT2803ARWZ from HTCSEMI, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input 1 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 2 | I2 | input | Input 2 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 3 | I3 | input | Input 3 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 4 | I4 | input | Input 4 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 5 | I5 | input | Input 5 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 6 | I6 | input | Input 6 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 7 | I7 | input | Input 7 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 8 | I8 | input | Input 8 to the Darlington driver with 2.7kΩ base resistor, TTL/5V CMOS compatible; VIN 0 to 30V, VIN(ON) min 3.5V. |
| 9 | GND | power_in | Ground, common emitter of all eight Darlington drivers. |
| 10 | COMMON | passive | Common cathode of the output clamp diodes, connected to the load supply; clamp diode VR 50V max, IF 500mA max. |
| 11 | O8 | output | Open-collector Darlington output 8 (sink); up to 500mA max, 50V sustaining voltage. |
| 12 | O7 | output | Open-collector Darlington output 7 (sink); up to 500mA max, 50V sustaining voltage. |
| 13 | O6 | output | Open-collector Darlington output 6 (sink); up to 500mA max, 50V sustaining voltage. |
| 14 | O5 | output | Open-collector Darlington output 5 (sink); up to 500mA max, 50V sustaining voltage. |
| 15 | O4 | output | Open-collector Darlington output 4 (sink); up to 500mA max, 50V sustaining voltage. |
| 16 | O3 | output | Open-collector Darlington output 3 (sink); up to 500mA max, 50V sustaining voltage. |
| 17 | O2 | output | Open-collector Darlington output 2 (sink); up to 500mA max, 50V sustaining voltage. |
| 18 | O1 | output | Open-collector Darlington output 1 (sink); up to 500mA max, 50V sustaining voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-18-300mil |
| Category | Triode/MOS Tube/Transistor |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Sustaining Voltage | VCE(SUS) | -0.5 | 50 | V | Ta=25°C | 2 | |
| Output Current (single output) | IOUT | 500 | mA/ch | Ta=25°C | 2 | ||
| Input Voltage | VIN | -0.5 | 30 | V | Ta=25°C | 2 | |
| Clamp Diode Reverse Voltage | VR | 50 | V | Ta=25°C | 2 | ||
| Clamp Diode Forward Current | IF | 500 | mA | Ta=25°C | 2 | ||
| Power Dissipation (SOP, printed as DW) | PD | 0.96 | W | Ta=25°C | 2 | ||
| Operating Temperature | Topr | -40 | 85 | C | 2 | ||
| Storage Temperature | Tstg | -55 | 150 | C | 2 | ||
| Output Sustaining Voltage | VCE(SUS) | 0 | 50 | V | Ta=-40~85°C | 2 | |
| Output Current (SOP, printed as DW) | IOUT | 0 | 268 | mA/ch | Tpw=25ms,Duty=10%, 8 Circuits | 2 | |
| Output Current (SOP, printed as DW) | IOUT | 0 | 90 | mA/ch | Tpw=25ms,Duty=50%, 8 Circuits | 2 | |
| Input Voltage | VIN | 0 | 30 | V | Ta=-40~85°C | 2 | |
| Input Voltage (Output On), HT2803A | VIN(ON) | 3.5 | 30 | V | Ta=-40~85°C | 2 | |
| Clamp Diode Reverse Voltage | VR | 50 | V | Ta=-40~85°C | 2 | ||
| Clamp Diode Forward Current | IF | 400 | mA | Ta=-40~85°C | 2 | ||
| Power Dissipation (SOP, printed as DW) | PD | 0.4 | W | Ta=-40~85°C | 2 | ||
| Output Leakage Current, HT2803A | ICEX | 50 | uA | VCE=50V Ta=25°C | 3 | ||
| Output Leakage Current, HT2803A | ICEX | 100 | uA | VCE=50V Ta=85°C | 3 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | 1.3 | 1.6 | V | IOUT=350mA,IIN=500um | 3 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 1.1 | 1.3 | V | IOUT=200mA,IIN=350um | 3 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.9 | 1.1 | V | IOUT=100mA,IIN=250um | 3 | |
| Input Current, HT2803A | IIN(ON) | 0.93 | 1.35 | mA | VIN=3.85V | 3 | |
| Input Voltage (Output On), HT2803A | VIN(ON) | 2.4 | V | VCE=2V, IOUT=200mA | 3 | ||
| Input Voltage (Output On), HT2803A | VIN(ON) | 2.7 | V | VCE=2V, IOUT=250mA | 3 | ||
| Input Voltage (Output On), HT2803A | VIN(ON) | 3 | V | VCE=2V, IOUT=300mA | 3 | ||
| DC Current Transfer Ratio | hFE | 1000 | VCE=2V, IOUT=350mA | 3 | |||
| Clamp Diode Reverse Current | IR | 50 | uA | Ta=25°C (Note: VR=VRMAX) | 3 | ||
| Clamp Diode Reverse Current | IR | 100 | uA | Ta=85°C (Note: VR=VRMAX) | 3 | ||
| Clamp Diode Forward Voltage | VF | 2 | V | IF=350mA | 3 | ||
| Input Capacitance | CIN | 15 | pF | 3 |
CAD (KiCad official)
- Symbol:
HT2803ARWZ - Footprint:
Package_SO:SOP-18_7.495x11.515mm_P1.27mm - 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ht2803arwz-etched.step/ht2803arwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht2803arwz.step/ht2803arwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (9 pp, sha256
5832144e2090dc68, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).