main
History Download
Ray Publish 0.1.0 ff60b24

HT26LS32ARZ

HTCSEMI · Multi-protocol Transceivers · SOP-16

HT26LS32ARZ from HTCSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INPUT A- input Receiver A differential inverting input pin.
2 INPUT A+ input Receiver A differential non-inverting input pin.
3 OUTPUT A output Receiver A output pin.
4 ENABLE input Gate control (active high). This pin is one of the two control pins which enables or disables all four receivers.
5 OUTPUT B output Receiver B output pin.
6 INPUT B+ input Receiver B differential non-inverting input pin.
7 INPUT B- input Receiver B differential inverting input pin.
8 GND power_in Signal and power ground.
9 INPUT C- input Receiver C differential inverting input pin.
10 INPUT C+ input Receiver C differential non-inverting input pin.
11 OUTPUT C output Receiver C output pin.
12 -ENABLE input Gate control (active low). See ENABLE description.
13 OUTPUT D output Receiver D output pin.
14 INPUT D+ input Receiver D differential non-inverting input pin.
15 INPUT D- input Receiver D differential inverting input pin.
16 VCC power_in Power supply pin.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-16
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Range 7 V 3
Voltage at Any Pin -0.3 V Printed as GND-0.3V to VCC + 0.3V; upper limit is VCC + 0.3V, not a numeric value 3
Storage Temperature -60 160 C 3
Package Dissipation 500 mW 3
Operating Temperature -40 85 C 3
Propagation Delay, Input to Output T1 8 10 ns S1=VCC 3
Propagation Delay, Input to Output T2 18 20 ns S1=GND 3
Output Enable Time T3 18 20 ns VDIF=2.5V 3
Output Disable Time T4 18 20 ns VDIF=2.5V 3
Enable High Level VIH 2 V 3
Enable Low Level VIL 0.8 V 3
Output High Level VOH 3.8 V IOH= -6mA 3
Output Low Level VOL 0.4 V IOH= 6mA 3
Differential Input Level VID -0.2 0.2 V -7V < VCM < +7V 3
Input Hysteresis VH 50 mV 3
Input Current IIN 1 µA 3
Operating Current ICC 12 mA VDIF=+1V 3
Three-State Output Leakage IOZ 1 5 µA VOUT=VCC or GND 3
Enable Input Current IEN 1 µA VIN=VCC or GND 3
Input Resistance VR 5 15 KQ -7V < VCM < +7V 3

CAD (KiCad official)

  • Symbol: HT26LS32ARZ
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: ht26ls32arz-etched.step / ht26ls32arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht26ls32arz.step / ht26ls32arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (7 pp, sha256 4bc48d9beb2b5020, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF