Generated by kicad-footprint-generator · KiCad file format 20260206
HT2604BRZ
HTCSEMI · Operational Amplifier · SOP-8
HT2604BRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output A | output | Output of amplifier channel A. Drives loads down to 600 Ω with ±12 V typical swing and ±35 mA current, internally short-circuit limited to ~±40 mA. |
| 2 | -In A | input | Inverting input of amplifier channel A. FET input with ~100 pA bias current and 10^12 Ω common-mode input impedance. |
| 3 | +In A | input | Non-inverting input of amplifier channel A. FET input; common-mode range typically ±13 V (±12 V min) on ±15 V supplies. |
| 4 | V- | power_in | Negative supply rail. Operating range -4.5 V to -24 V (dual-supply, referenced to V+); total quiescent current ~±10.5 mA typical. |
| 5 | +In B | input | Non-inverting input of amplifier channel B. FET input; common-mode range typically ±13 V (±12 V min) on ±15 V supplies. |
| 6 | -In B | input | Inverting input of amplifier channel B. FET input with ~100 pA bias current and 10^12 Ω common-mode input impedance. |
| 7 | Output B | output | Output of amplifier channel B. Drives loads down to 600 Ω with ±12 V typical swing and ±35 mA current, internally short-circuit limited to ~±40 mA. |
| 8 | V+ | power_in | Positive supply rail. Operating range +4.5 V to +24 V (dual-supply, referenced to V-); specified operating voltage ±15 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
HT2604BRZHT2604BRZRHT2604BRZHT2604BNZHT2604BRZNHT2604BRZHT2604BRMZHT2604BRZMHT2604BRZHT2604BRDZHT2604BRZD
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | -5 | 1 | 5 | mV | 2 | ||
| Power Supply Rejection | 70 | 80 | dB | VS = ±5 to ±24V | 2 | ||
| Common-Mode Input Range | -12 | 13 | V | 2 | |||
| Common-Mode Rejection | 80 | 100 | dB | VCM = ±12V | 2 | ||
| Open-Loop Voltage Gain | 80 | 100 | dB | VO = ±10V, RL = 1kΩ | 2 | ||
| Slew Rate | 15 | 25 | V/µs | 20Vp-p, RL = 1kΩ | 2 | ||
| Voltage Output | -11 | 12 | V | RL = 600Ω | 2 | ||
| Total Current, Both Amplifiers | 10.5 | 12 | mA | IO = 0 | 2 | ||
| Specified Operating Temperature | -25 | 85 | °C | 2 | |||
| Storage Temperature | -40 | 125 | °C | 2 | |||
| Operating Voltage Range | 4.5 | 24 | V | 2 | |||
| Current Output | 35 | mA | VO = ±12V | 2 | |||
| Average Drift | 8 | µV/°C | 2 | ||||
| Input Bias Current | 100 | pA | VCM = 0V | 2 | |||
| Input Offset Current | 4 | pA | VCM = 0V | 2 | |||
| Input Voltage Noise Density | 25 | nV/√Hz | f = 10Hz | 2 | |||
| Input Voltage Noise Density | 15 | nV/√Hz | f = 100Hz | 2 | |||
| Input Voltage Noise Density | 11 | nV/√Hz | f = 1kHz | 2 | |||
| Input Voltage Noise Density | 10 | nV/√Hz | f = 10kHz | 2 | |||
| Input Voltage Noise | 1.5 | µVp-p | BW = 20Hz to 20kHz | 2 | |||
| Input Bias Current Noise Density | 6 | fA/√Hz | f = 0.1Hz to 20kHz | 2 | |||
| Specified Operating Voltage | 15 | V | 2 | ||||
| Gain-Bandwidth Product | 15 | MHz | G = 100 | 2 | |||
| Settling Time 0.01% | 1.5 | µs | G = –1, 10V Step | 2 | |||
| Settling Time 0.1% | 1 | µs | 2 | ||||
| Total Harmonic Distortion + Noise | THD+N | 0.0003 | % | G = 1, f = 1kHz, VO = 3.5Vrms, RL = 1kΩ | 2 | ||
| Channel Separation | 142 | dB | f = 1kHz, RL = 1kΩ | 2 | |||
| Short Circuit Current | 40 | mA | 2 | ||||
| Output Resistance, Open-Loop | 25 | Ω | 2 | ||||
| Thermal Resistance, Junction-to-Ambient | θJA | 90 | °C/W | Soldered to circuit board | 2 |
CAD (KiCad official)
- Symbol:
HT2604BRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht2604brz-etched.step/ht2604brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht2604brz.step/ht2604brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (None pp, sha256
ba9ded652e3a0699, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).