main
Ray Publish 0.1.1 d4cec73
{
  "slug": "ht24c256arz",
  "version": "0.1.1",
  "type": "component",
  "description": "HTCSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "ht24c256arz"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ht24c256arz.kicad_sym",
    "ht24c256arz.kicad_mod",
    "ht24c256arz.glb",
    "ht24c256arz.step",
    "ht24c256arz.lbr",
    "docs/hero.png",
    "docs/ht24c256arz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ht24c256arz-etched.step",
    "ht24c256arz-etched.glb"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HT24C256ARZ",
    "manufacturer": "HTCSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "ht24c256arz.kicad_sym",
      "footprint": "ht24c256arz.kicad_mod",
      "model_3d": "ht24c256arz-etched.glb",
      "model_3d_plain": "ht24c256arz.glb",
      "model_3d_step": "ht24c256arz-etched.step",
      "model_3d_step_plain": "ht24c256arz.step",
      "lbr": "ht24c256arz.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Device address input bit 0. Hard-wired to VSS or VCC to set the least significant bit of the I2C slave address; if left floating it is internally read as VSS (low). Up to eight HT24C256A devices can share one 2-wire bus by using unique A0/A1/A2 combinations."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Device address input bit 1. Hard-wired to VSS or VCC to set the second I2C slave address bit; if left floating it is internally read as VSS (low)."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Device address input bit 2. Hard-wired to VSS or VCC to set the most significant of the three slave address bits; if left floating it is internally read as VSS (low)."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Negative power supply / ground reference (0V)."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data input/output for the 2-wire (I2C) interface. Open-drain output that requires an external pull-up resistor to VCC; may be wired-OR with other open-drain devices on the bus. Input high VIH = 0.7*VCC min, input low VIL = 0.3*VCC max; VOL = 0.4V max at IOL = 2.1mA (VCC = 2.4V)."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input for the 2-wire (I2C) interface. Data is clocked into the EEPROM on the positive edge and clocked out on the negative edge. Maximum clock frequency is 400kHz at VCC = 1.8V-5.0V and 1MHz at VCC = 2.5V-5.0V."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write protect input. When tied to VCC, the entire 256K memory array is write-protected (read-only). When tied to VSS or left floating, normal read/write operations are permitted."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive power supply, 1.8V to 5.5V over the -40°C to +85°C operating range. Operating current is 2mA max (read) / 5mA max (write) at 5V, 400kHz; standby current is 3μA max at 5V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C3019554",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:00:23Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "ht24c256arz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ht24c256arz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d604600b70a7128caeda3e261943f217602e77d2ccddfc2a23e26d429a472d09",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}