Generated by kicad-footprint-generator · KiCad file format 20260206
HT2330ARZ
HTCSEMI · Operational Amplifier · SOP-8
HT2330ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings to both rails with light load. |
| 2 | -IN A | input | Inverting input of amplifier A; the input common-mode voltage extends to the negative rail. |
| 3 | +IN A | input | Non-inverting input of amplifier A; input common-mode voltage range is 0 to VCC-1.3 V. |
| 4 | V- | power_in | Negative supply rail; the device operates from a 1.4 V to 7 V supply with single-supply operation. |
| 5 | +IN B | input | Non-inverting input of amplifier B; input common-mode voltage range is 0 to VCC-1.3 V. |
| 6 | -IN B | input | Inverting input of amplifier B; the input common-mode voltage extends to the negative rail. |
| 7 | OUT B | output | Output of amplifier B, which swings to both rails with light load. |
| 8 | V+ | power_in | Positive supply rail; absolute maximum power supply voltage VCC is 8.5 V and the recommended operating range is 1.4 V to 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VIO | 0.5 | 1 | mV | VICM =0V to VCC-1.5V; VCC = 3.0V, TA = 25 oC | 2 | |
| Input Common Mode Voltage Range | VICR | 0 | V | VCC = 3.0V, TA = 25 oC; upper limit printed as VCC-1.3 (not numeric) | 2 | ||
| Supply Current (per amplifier) | ICC | 5 | 9 | μA | VCC = 3.0V, TA = 25 oC | 2 | |
| Large Signal Voltage Gain | AV | 20 | 100 | V/mV | VO=1V to 2V; VIN=1.4V; RL=1MΩ | 2 | |
| Output Voltage Swing High | VOH | 2.95 | 2.99 | V | VIN=10mV; RL=1MΩ (to V-) | 2 | |
| Output Voltage Swing High | VOH | 2.6 | V | VIN=10mV; RL=10KΩ (to V-) | 2 | ||
| Output Voltage Swing Low | VOL | 0.2 | 0.5 | V | VIN=10mV; RL=1MΩ (to V+) | 2 | |
| Common Mode Rejection Ratio | CMRR | 60 | 80 | dB | VO=1V; VIN=0V to 2.0V; | 2 | |
| Output Current Source | Isource | 1.5 | 2.5 | mA | 2 | ||
| Output Current Sink | Isink | 3 | 5 | μA | 2 | ||
| Power Supply Voltage | VCC | 8.5 | V | 2 | |||
| Input Voltage | VIN | -0.3 | V | Printed as -0.3 to VCC + 0.3; upper limit not numeric | 2 | ||
| Operating Temperature Range | Topr | 0 | 70 | oC | Listed in Absolute Maximum Ratings table; ordering note states TA = -40 to 85C | 2 | |
| Storage Temperature Range | Tstg | -65 | 150 | oC | 2 | ||
| Supply Voltage Operating Range | 1.4 | 7 | V | Stated in Features list (Wide supply operating range) | 1 |
CAD (KiCad official)
- Symbol:
HT2330ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht2330arz-etched.step/ht2330arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht2330arz.step/ht2330arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (3 pp, sha256
d5094302e60d8f85, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).