main
Ray
Publish 0.1.0
6c6c3de
HT2271ARTZ
HTCSEMI · Operational Amplifier · SOT-23-5
HT2271ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the voltage range extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Ground pin; connect to the most negative supply, all GND pads are connected on die. |
| 3 | INP | input | Non-inverting input of the amplifier; voltage range of this pin can go from 0 to VDD. |
| 4 | INN | input | Inverting input of the amplifier; has the same voltage range as INP (0 to VDD). |
| 5 | VDD | power_in | Power supply (5V), connect to positive voltage supply; recommended operating range 2.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VCC | 2.5 | 5 | 5.5 | V | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Input Offset Voltage | VOS | -2 | 1 | 2 | mV | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Quiescent Current per Amplifier | IQ | 330 | 550 | uA | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 | |
| Common mode Input voltage | Vin_cm | 0 | V | upper value printed VDD-0.1 | 3 | ||
| Input Offset voltage Temp Drift | VOS_TC | 4 | µV/℃ | 3 | |||
| Input Voltage Noise Density | en | 25 | nV/√Hz | f=1KHz | 3 | ||
| Output Current | Iout | 50 | mA | 3 | |||
| Output Voltage from supply Swing | VOL | 10 | mV | 3 | |||
| Common Mode Rejection Ratio | CMRR | 100 | dB | 3 | |||
| Output short-circuit current | ISC | 80 | mA | 3 | |||
| Phase Margin | PM | 65 | ° | 3 | |||
| Gain Margin | GM | -10 | dB | 3 | |||
| Gain-Bandwidth Product | GBWP | 6 | MHz | 3 | |||
| Settling time | ts | 0.46 | µs | 1.5V to 3.5V, Unity Gain: 0.1% | 3 | ||
| Slew Rate | SR | 3.7 | µs | 3 | |||
| Total Harmonic Distortion and Noise | THD+Noise | 0.0007 | % | f=1KHz | 3 | ||
| Power supply | VDD | 6 | V | 2 | |||
| Operating ambient Temperature Range | TA | -40 | 125 | ℃ | 2 | ||
| Storage Temperature | TSTG | -65 | 150 | ℃ | 2 | ||
| Power supply | VDD | 2.5 | 5.5 | V | 2 | ||
| Operating ambient Temperature Range | TA | -40 | 125 | ℃ | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
HT2271ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ht2271artz-etched.step/ht2271artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht2271artz.step/ht2271artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (6 pp, sha256
f6af64bdfa0d2986, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# HT2271ARTZ
**HTCSEMI** · Operational Amplifier · SOT-23-5
HT2271ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the voltage range extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Ground pin; connect to the most negative supply, all GND pads are connected on die. |
| 3 | INP | input | Non-inverting input of the amplifier; voltage range of this pin can go from 0 to VDD. |
| 4 | INN | input | Inverting input of the amplifier; has the same voltage range as INP (0 to VDD). |
| 5 | VDD | power_in | Power supply (5V), connect to positive voltage supply; recommended operating range 2.5V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VCC | 2.5 | 5 | 5.5 | V | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Input Offset Voltage | VOS | -2 | 1 | 2 | mV | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Quiescent Current per Amplifier | IQ | | 330 | 550 | uA | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Common mode Input voltage | Vin_cm | 0 | | | V | upper value printed VDD-0.1 | 3 |
| Input Offset voltage Temp Drift | VOS_TC | | 4 | | µV/℃ | | 3 |
| Input Voltage Noise Density | en | | 25 | | nV/√Hz | f=1KHz | 3 |
| Output Current | Iout | | 50 | | mA | | 3 |
| Output Voltage from supply Swing | VOL | | 10 | | mV | | 3 |
| Common Mode Rejection Ratio | CMRR | | 100 | | dB | | 3 |
| Output short-circuit current | ISC | | 80 | | mA | | 3 |
| Phase Margin | PM | | 65 | | ° | | 3 |
| Gain Margin | GM | | -10 | | dB | | 3 |
| Gain-Bandwidth Product | GBWP | | 6 | | MHz | | 3 |
| Settling time | ts | | 0.46 | | µs | 1.5V to 3.5V, Unity Gain: 0.1% | 3 |
| Slew Rate | SR | | 3.7 | | µs | | 3 |
| Total Harmonic Distortion and Noise | THD+Noise | | 0.0007 | | % | f=1KHz | 3 |
| Power supply | VDD | | | 6 | V | | 2 |
| Operating ambient Temperature Range | TA | -40 | | 125 | ℃ | | 2 |
| Storage Temperature | TSTG | -65 | | 150 | ℃ | | 2 |
| Power supply | VDD | 2.5 | | 5.5 | V | | 2 |
| Operating ambient Temperature Range | TA | -40 | | 125 | ℃ | | 2 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `HT2271ARTZ`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ht2271artz-etched.step` / `ht2271artz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht2271artz.step` / `ht2271artz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht2271artz-datasheet.pdf) (6 pp, sha256 `f6af64bdfa0d2986`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ht2271artz-datasheet.pdf)