Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HT2177ANZ

HTCSEMI · Precision Op Amps · DIP-8

HT2177ANZ from HTCSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output, stable with capacitive loads up to 1000 pF without compensation and with output current of ±10 mA.
2 -IN1 input Amplifier A inverting input, internally protected with 500 Ω series resistor to allow inputs up to 2.5 V beyond either supply without phase reversal.
3 +IN1 input Amplifier A non-inverting input, internally protected with 500 Ω series resistor to allow inputs up to 2.5 V beyond either supply without phase reversal.
4 -Vs power_in Negative supply, dual-supply operation from ±2.5 V to ±15 V (36 V maximum total supply).
5 +IN2 input Amplifier B non-inverting input, internally protected with 500 Ω series resistor to allow inputs up to 2.5 V beyond either supply without phase reversal.
6 -IN2 input Amplifier B inverting input, internally protected with 500 Ω series resistor to allow inputs up to 2.5 V beyond either supply without phase reversal.
7 OUTB output Amplifier B output, stable with capacitive loads up to 1000 pF without compensation and with output current of ±10 mA.
8 +Vs power_in Positive supply, dual-supply operation from ±2.5 V to ±15 V (36 V maximum total supply).

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package DIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset Voltage VOS 15 75 μV VS = ±5.0 V, VCM = 0 V, TA = 25°C 2
Offset Voltage over temperature VOS 25 100 μV VS = ±5.0 V, −40°C < TA < +125°C 2
Input Bias Current IB -2 0.5 2 nA VS = ±5.0 V, −40°C < TA < +125°C 2
Input Offset Current IOS -1 0.2 1 nA VS = ±5.0 V, −40°C < TA < +125°C 2
Input Voltage Range -3.5 3.5 V VS = ±5.0 V 2
Common-Mode Rejection Ratio CMRR 120 126 dB VS = ±5.0 V, VCM = −3.5 V to +3.5 V 2
Common-Mode Rejection Ratio over temperature CMRR 118 125 dB VS = ±5.0 V, −40°C < TA < +125°C 2
Large Signal Voltage Gain AVO 1000 2000 V/mV VS = ±5.0 V, RL = 2 kΩ, VO = −3.5 V to +3.5 V 2
Offset Voltage Drift ΔVOS/ΔT 0.2 0.7 μV/°C VS = ±5.0 V, −40°C < TA < +125°C 2
Output Voltage High VOH 4 4.1 V VS = ±5.0 V, IL = 1 mA, −40°C < TA < +125°C 2
Output Voltage Low VOL -4.1 -4 V VS = ±5.0 V, IL = 1 mA, −40°C < TA < +125°C 2
Output Current IOUT -10 10 mA VS = ±5.0 V, VDROP OUT < 1.2 V 2
Power Supply Rejection Ratio PSRR 118 121 dB VS = ±5.0 V, VS = ±2.5 V to ±15 V 2
Power Supply Rejection Ratio over temperature PSRR 114 120 dB VS = ±5.0 V, VS = ±2.5 V to ±15 V, −40°C < TA < +125°C 2
Supply Current per Amplifier ISY 400 500 μA VS = ±5.0 V, VO = 0 V 2
Supply Current per Amplifier over temperature ISY 500 600 μA VS = ±5.0 V, VO = 0 V, −40°C < TA < +125°C 2
Voltage Noise Density en 7.9 8.5 nV/√Hz VS = ±5.0 V, f = 1 kHz 2
Offset Voltage VOS 15 75 μV VS = ±15 V, VCM = 0 V, TA = 25°C 3
Offset Voltage over temperature VOS 25 100 μV VS = ±15 V, −40°C < TA < +125°C 3
Input Bias Current IB -2 0.5 2 nA VS = ±15 V, −40°C < TA < +125°C 3
Input Offset Current IOS -1 0.2 1 nA VS = ±15 V, −40°C < TA < +125°C 3
Input Voltage Range -13.5 13.5 V VS = ±15 V 3
Common-Mode Rejection Ratio CMRR 120 125 dB VS = ±15 V, VCM = −13.5 V to +13.5 V, −40°C < TA < +125°C 3
Large Signal Voltage Gain AVO 1000 3000 V/mV VS = ±15 V, RL = 2 kΩ, VO = -13.5 V to +13.5 V 3
Offset Voltage Drift ΔVOS/ΔT 0.2 0.7 μV/°C VS = ±15 V, −40°C < TA < +125°C 3
Output Voltage High VOH 14 14.1 V VS = ±15 V, IL = 1 mA, −40°C < TA < +125°C 3
Output Voltage Low VOL -14.1 -14 V VS = ±15 V, IL = 1 mA, −40°C < TA < +125°C 3
Output Current IOUT -10 10 mA VS = ±15 V, VDROP OUT < 1.2 V 3
Short-Circuit Current ISC 25 mA VS = ±15 V, printed as ±25 3
Power Supply Rejection Ratio PSRR 118 121 dB VS = ±15 V, VS = ±2.5 V to ±15 V 3
Power Supply Rejection Ratio over temperature PSRR 114 120 dB VS = ±15 V, VS = ±2.5 V to ±15 V, −40°C < TA < +125°C 3
Supply Current per Amplifier ISY 400 500 μA VS = ±15 V, VO = 0 V 3
Supply Current per Amplifier over temperature ISY 500 600 μA VS = ±15 V, VO = 0 V, −40°C < TA < +125°C 3
Voltage Noise Density en 7.9 8.5 nV/√Hz VS = ±15 V, f = 1 kHz 3
Supply Voltage 36 V 4
Storage Temperature Range -65 150 °C R, RM, and RU Packages 4
Operating Temperature Range -40 125 °C HT1177/HT2177/HT4177 4
Junction Temperature Range -65 150 °C R, RM, and RU Packages 4
Lead Temperature, Soldering 300 °C 10 sec 4

CAD (KiCad official)

  • Symbol: HT2177ANZ
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: ht2177anz-etched.step / ht2177anz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht2177anz.step / ht2177anz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (22 pp, sha256 34834fcc27d708e4, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF