component
HT18B20ARTZ
Public Made by Adomby adom
HTCSEMI Temperature Sensors, TO-92. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT18B20ARTZ
HTCSEMI · Temperature Sensors · TO-92
HT18B20ARTZ from HTCSEMI, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Common pin; all voltages are referenced to this pin. |
| 2 | DQ | bidirectional | 1-Wire data input/output; the bus is connected to the supply through a pull-up resistor (4.7 kΩ in the connection diagrams) and the pin can also supply parasite power. |
| 3 | VDD | power_in | Power supply pin; supply voltage UDD is 3.0 V to 5.5 V in external-supply mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | TO-92 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature | Ta | -60 | 125 | °C | 4 | ||
| Supply voltage (on external pull-up resistor) | UPU | 3 | V | in supply mode on VDD pin; note 1 (max printed as UDD) | 4 | ||
| High level input voltage | UIH | 3 | V | in supply mode on DQ (UDD = 0 V) pin; notes 1, 2, 4 (max printed as UDD+0,3) | 4 | ||
| Cycle time of EEPROM record | tWR | 10 | ms | at UDD = 5 V; note 2 | 4 | ||
| Operating ambient temperature | Ta | -55 | 125 | °C | 4 | ||
| Consumption current | IDD | 1 | А | at 0 V ≤ UI ≤ 0,4 V or UDD−0,3 V ≤ UI ≤ UDD; ambient -55 to 70 °C | 5 | ||
| Dynamic consumption current | IODD | 1500 | А | at UDD = 5 V; ambient -55 to 125 °C | 5 | ||
| Low level output current | IOL | 4 | mA | at UO = 0,4 V | 5 | ||
| Temperature measurement error | tERR | -2 | 2 | °C | ambient -55 to 125 °C | 5 | |
| Time interval of the 1-Wire interface communication protocol | tSLOT | 60 | 120 | s | 10 | ||
| Write «1» low level duration | tLOW1 | 1 | 15 | s | 10 | ||
| Write «0» low level duration | tLOW0 | 60 | 120 | s | 10 | ||
| Read data valid | tRDV | 15 | s | 10 | |||
| Recovery time | tREC | 1 | s | 10 | |||
| Reset high level duration | tRSTH | 480 | s | note 1 | 10 | ||
| Reset low level duration | tRSTL | 480 | s | note 2 | 10 | ||
| Presence pulse high level duration | tPDH | 15 | 60 | s | 10 | ||
| Presence pulse low level duration | tPDL | 60 | 240 | s | 10 | ||
| Temperature conversion time | tCONV | 375 | ms | 11-bit resolution | 10 | ||
| Temperature conversion time | tCONV | 750 | ms | 12-bit resolution | 10 |
CAD (KiCad official)
- Symbol:
HT18B20ARTZ - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files:
ht18b20artz-etched.step/ht18b20artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht18b20artz.step/ht18b20artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (16 pp, sha256
e9d026fd610dd6a5, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).