main
History Download
Ray Publish 0.1.1 31df84d

HT1621DM

HGSEMI · LCD Drivers · SSOP-24-150mil

HT1621DM from HGSEMI, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SEG17 output LCD segment output 17.
2 SEG16 output LCD segment output 16.
3 SEG15 output LCD segment output 15.
4 SEG14 output LCD segment output 14.
5 SEG13 output LCD segment output 13.
6 SEG12 output LCD segment output 12.
7 SEG11 output LCD segment output 11.
8 SEG10 output LCD segment output 10.
9 SEG9 output LCD segment output 9.
10 ~{CS} input Chip select input, active low, with pull-up (HGSEMI p.2 prints CS with an overbar). High: data and commands cannot be read or written and the serial interface resets; low: the controller and HT1621 exchange data and commands.
11 ~{WR} input WRITE clock input with pull-up (HGSEMI p.2 prints WR with an overbar); DATA is latched into the HT1621 on the rising edge of WR.
12 DATA bidirectional Serial data input/output with pull-up resistor.
13 VSS power_in Ground.
14 VLCD power_in LCD voltage input, used to adjust the LCD drive voltage.
15 VDD power_in Power supply, operating range 2.4V to 5.2V.
16 COM0 output LCD common output 0.
17 COM1 output LCD common output 1.
18 COM2 output LCD common output 2.
19 COM3 output LCD common output 3.
20 SEG22 output LCD segment output 22.
21 SEG21 output LCD segment output 21.
22 SEG20 output LCD segment output 20.
23 SEG19 output LCD segment output 19.
24 SEG18 output LCD segment output 18.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SSOP-24-150mil
Category LED Drivers
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 5.5 V 13
Storage temperature TSTG -50 125 ℃ 13
Operating temperature TOTG -25 75 ℃ 13
Pin soldering temperature TLEAD 260 ℃ Pin soldering, 10 s 13
Operating voltage VDD 2.4 5.2 V 13
Working current (on-chip RC oscillator, LCD on) IDD1 150 300 µA VDD=3V, no load, LCD on, on-chip RC oscillator 13
Working current (on-chip RC oscillator, LCD on) IDD1 300 600 µA VDD=5V, no load, LCD on, on-chip RC oscillator 13
Working current (crystal oscillator, LCD on) IDD2 60 120 µA VDD=3V, no load, LCD on, crystal oscillator 13
Working current (crystal oscillator, LCD on) IDD2 120 240 µA VDD=5V, no load, LCD on, crystal oscillator 13
Working current (external clock, LCD off) IDD3 100 200 µA VDD=3V, no load, LCD off, external clock 13
Working current (external clock, LCD off) IDD3 200 400 µA VDD=5V, no load, LCD off, external clock 13
Standby current ISTB 0.1 5 µA VDD=3V, no load 13
Standby current ISTB 0.3 10 µA VDD=5V, power-down mode 13
Input low voltage (DATA, WR, CS, RD) VIL 0 0.6 V VDD=3V; pins DATA, WR, CS, RD 13
Input low voltage (DATA, WR, CS, RD) VIL 0 1 V VDD=5V; pins DATA, WR, CS, RD 13
Input high voltage (DATA, WR, CS, RD) VIH 2.4 3 V VDD=3V; pins DATA, WR, CS, RD 13
Input high voltage (DATA, WR, CS, RD) VIH 4 5 V VDD=5V; pins DATA, WR, CS, RD 13
Low-level output sink current (DATA, BZ, BZ-bar, IRQ-bar) IOL1 0.5 1.2 mA VDD=3V, VOL=0.3V 13
Low-level output sink current (DATA, BZ, BZ-bar, IRQ-bar) IOL1 1.3 2.6 mA VDD=5V, VOL=0.5V 13
High-level output source current (DATA, BZ, BZ-bar) IOH1 -0.4 -0.8 mA VDD=3V, VOH=2.7V 13
High-level output source current (DATA, BZ, BZ-bar) IOH1 -0.9 -1.8 mA VDD=5V, VOH=4.5V 13
LCD common pin sink current IOL2 80 150 µA VDD=3V, VOL=0.3V 13
LCD common pin sink current IOL2 150 250 µA VDD=5V, VOL=0.5V 13
LCD common pin source current IOH2 -80 -120 µA VDD=3V, VOH=2.7V 13
LCD common pin source current IOH2 -120 -200 µA VDD=5V, VOH=4.5V 13
LCD segment pin sink current IOL3 60 120 µA VDD=3V, VOL=0.3V 13
LCD segment pin sink current IOL3 120 200 µA VDD=5V, VOL=0.5V 13
LCD segment pin source current IOH3 -40 -70 µA VDD=3V, VOH=2.7V 13
LCD segment pin source current IOH3 -70 -100 µA VDD=5V, VOH=4.5V 13
Pull-up resistor (DATA, WR, CS, RD) RPH 40 80 150 kΩ VDD=3V; pins DATA, WR, CS, RD 13
Pull-up resistor (DATA, WR, CS, RD) RPH 30 60 100 kΩ VDD=5V; pins DATA, WR, CS, RD 13
Serial data clock (WR pin) FCLK1 150 kHz VDD=3V, 50% duty cycle 14
Serial data clock (WR pin) FCLK1 300 kHz VDD=5V, 50% duty cycle 14
Serial data clock (RD pin) FCLK2 75 kHz VDD=3V, 50% duty cycle 14
Serial data clock (RD pin) FCLK2 150 kHz VDD=5V, 50% duty cycle 14
WR/RD input pulse width tCLK 3.34 µs VDD=3V, write mode 14
WR/RD input pulse width tCLK 6.67 µs VDD=3V, read mode 14
WR/RD input pulse width tCLK 1.67 µs VDD=5V, write mode 14

CAD (KiCad official)

  • Symbol: HT1621DM
  • Footprint: Package_SO:SSOP-24_3.9x8.7mm_P0.635mm
  • 3D model: SSOP-24-150mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.4 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ht1621dm-etched.step / ht1621dm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht1621dm.step / ht1621dm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (19 pp, sha256 ace3f17b9fb899e1, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF