main
Ray
Publish 0.1.0
495b2ce
HT1561ARTZ
HTCSEMI · Operational Amplifier · SOT-23-5
HT1561ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the voltage range extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Ground pin; connect to the most negative supply, and all GND pads are connected on die. |
| 3 | INP | input | Non-inverting input of the amplifier; voltage range can go from 0 to VDD. |
| 4 | INN | input | Inverting input of the amplifier; this pin has the same voltage range as INP. |
| 5 | VDD | power_in | Positive power supply pin, 5V nominal; connect to the positive voltage supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply (absolute maximum) | VDD | 6 | V | 2 | |||
| Operating ambient temperature range (absolute maximum) | TA | -40 | 125 | ℃ | 2 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 2 | ||
| Power supply (recommended operating) | VDD | 2.5 | 5.5 | V | 2 | ||
| Operating ambient temperature range (recommended operating) | TA | -40 | 125 | ℃ | 2 | ||
| Operating Supply Voltage | VCC | 2.5 | 5 | 5.5 | V | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Input Offset Voltage | VOS | -0.5 | 0.3 | 0.5 | mV | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Input Resistance | RIN | 100 | GΩ | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 | ||
| Quiescent Current per Amplifier | IQ | 150 | 330 | uA | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 | |
| Common mode Input voltage | Vin_cm | 0 | V | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
HT1561ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ht1561artz-etched.step/ht1561artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht1561artz.step/ht1561artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (6 pp, sha256
565653151a2f07c6, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# HT1561ARTZ
**HTCSEMI** · Operational Amplifier · SOT-23-5
HT1561ARTZ from HTCSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the voltage range extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Ground pin; connect to the most negative supply, and all GND pads are connected on die. |
| 3 | INP | input | Non-inverting input of the amplifier; voltage range can go from 0 to VDD. |
| 4 | INN | input | Inverting input of the amplifier; this pin has the same voltage range as INP. |
| 5 | VDD | power_in | Positive power supply pin, 5V nominal; connect to the positive voltage supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply (absolute maximum) | VDD | | | 6 | V | | 2 |
| Operating ambient temperature range (absolute maximum) | TA | -40 | | 125 | ℃ | | 2 |
| Storage temperature | TSTG | -65 | | 150 | ℃ | | 2 |
| Power supply (recommended operating) | VDD | 2.5 | | 5.5 | V | | 2 |
| Operating ambient temperature range (recommended operating) | TA | -40 | | 125 | ℃ | | 2 |
| Operating Supply Voltage | VCC | 2.5 | 5 | 5.5 | V | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Input Offset Voltage | VOS | -0.5 | 0.3 | 0.5 | mV | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Input Resistance | RIN | 100 | | | GΩ | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Quiescent Current per Amplifier | IQ | | 150 | 330 | uA | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
| Common mode Input voltage | Vin_cm | 0 | | | V | TA=+27℃, VDD=5V, VCM=VOUT=VDD/2, RL=10Kohm, CL=100pF | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `HT1561ARTZ`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ht1561artz-etched.step` / `ht1561artz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht1561artz.step` / `ht1561artz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht1561artz-datasheet.pdf) (6 pp, sha256 `565653151a2f07c6`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ht1561artz-datasheet.pdf)