main
Ray ht1307arz: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… a0a1980
{
  "slug": "ht1307arz",
  "version": "0.1.0",
  "type": "component",
  "description": "HTCSEMI Real-time Clocks (RTC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rtc",
    "ht1307arz"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ht1307arz.kicad_sym",
    "ht1307arz.kicad_mod",
    "ht1307arz.glb",
    "ht1307arz.step",
    "ht1307arz.lbr",
    "docs/hero.png",
    "docs/ht1307arz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ht1307arz-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "HT1307ARZ",
    "manufacturer": "HTCSEMI",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Real-time Clocks (RTC)",
    "parts": {
      "symbol": "ht1307arz.kicad_sym",
      "footprint": "ht1307arz.kicad_mod",
      "model_3d": "ht1307arz-etched.glb",
      "model_3d_plain": "ht1307arz.glb",
      "model_3d_step": "ht1307arz-etched.step",
      "model_3d_step_plain": "ht1307arz.step",
      "lbr": "ht1307arz.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "X1",
        "type": "input",
        "description": "Connection to one terminal of the external 32.768 kHz quartz crystal used by the on-chip oscillator. Recommended crystal load capacitance CLX = 12.5 pF."
      },
      {
        "number": "2",
        "name": "X2",
        "type": "output",
        "description": "Connection to the second terminal of the external 32.768 kHz quartz crystal for the on-chip oscillator. Recommended crystal load capacitance CLX = 12.5 pF."
      },
      {
        "number": "3",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup battery supply input, 2.0-3.5 V (absolute max -0.5 to 7.0 V). Sustains timekeeping and RAM when VCC is removed; typical IBAT is 0.5 uA (SQW off) or 0.8 uA (SQW on, 32 kHz on) at VBAT = 3 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground. All voltages are referenced to this pin."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data I/O for the two-wire (I2C-compatible) bus. Open-drain output requires an external pull-up resistor to VCC. VOL <= 0.4 V at 5 mA sink; total bus capacitance up to 400 pF; supports standard-mode transfers at 100 kHz."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input for the two-wire (I2C-compatible) bus. Requires an external pull-up to VCC; input leakage ILI <= 1 uA. Maximum SCL frequency 100 kHz (standard mode)."
      },
      {
        "number": "7",
        "name": "SQW/OUT",
        "type": "output",
        "description": "Programmable square-wave / general-purpose output. When SQWE (control register bit 4) = 1, outputs 1 Hz, 4.096 kHz, 8.192 kHz, or 32.768 kHz selected by RS1:RS0. When SQWE = 0, the pin is driven to the level of the OUT bit. Open-drain: requires an external pull-up resistor."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Primary supply, 4.5-5.5 V (absolute max -0.5 to 7.0 V). When VCC > VBAT + 0.2 V the device operates from VCC; when VCC falls below 1.25 x VBAT the device inhibits access and switches to VBAT. Typical ICC 200 uA static / 1500 uA max during I2C traffic at 100 kHz."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2834446",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:00:00Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "ht1307arz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ht1307arz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "50c4f9e0de24faf004698d930c7b38dd96c9d01da0b8c2c6b99ef012accdbab7",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}