main
Ray
Publish 0.1.0
7283419
HT1062BRZ
HTCSEMI · Analog To Digital Converters (ADCs) · SOP-16
HT1062BRZ from HTCSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LN | passive | Positive line terminal; continuous line voltage limited to 12 V maximum. |
| 2 | GAS1 | passive | Gain adjustment for the transmitting amplifier; resistor R7 to GAS2 sets microphone gain between 44 and 52 dB, with C6 to SLPE and C8 to VEE for stability. |
| 3 | GAS2 | passive | Gain adjustment for the transmitting amplifier; R7 connected between GAS1 and GAS2 sets the gain. |
| 4 | QR | output | Non-inverting output of the receiving amplifier with output impedance typically 4 ohms. |
| 5 | GAR | passive | Gain adjustment for the receiving amplifier; R4 between GAR and QR sets IR-to-QR gain between 20 and 31 dB. |
| 6 | MIC- | input | Inverting microphone input with 64 kohm differential input impedance (32 kohm single-ended). |
| 7 | MIC+ | input | Non-inverting microphone input with 64 kohm differential input impedance (32 kohm single-ended). |
| 8 | STAB | passive | Current stabilizer pin; a 3.6 kohm resistor to VEE sets the stabilizer current level. |
| 9 | VEE | power_in | Negative line terminal (ground reference, 0 V). |
| 10 | IR | input | Receiving amplifier input with input impedance typically 21 kohm. |
| 11 | DTMF | input | Dual-tone multi-frequency input with input impedance typically 20.7 kohm and gain to LN typically 25.5 dB. |
| 12 | MUTE | input | Mute input; active HIGH on HT1062B and active LOW on HT1062A, with VIH min 1.5 V and VIL max 0.3 V. |
| 13 | VCC | power_out | Positive supply decoupling pin that also supplies external circuits, typically 2.2 V minimum at Iline = 15 mA with Ip = 1.2 mA. |
| 14 | REG | passive | Voltage regulator decoupling pin, decoupled by a capacitor to VEE; a resistor RVA to SLPE raises the DC line voltage. |
| 15 | AGC | input | Automatic gain control input; resistor R6 to VEE sets line loss compensation, and the pin may be left open for maximum gain. |
| 16 | SLPE | passive | Slope (DC resistance) adjustment; external resistor R9, normally 20 ohms, connects to VEE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-16 |
| Category | Data Converters |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Line voltage | VLN | 3.55 | 4 | 4.25 | V | MIC inputs open-circuit; Iline = 15mA | 12 |
| Supply current | ICC | 0.9 | 1.35 | mA | VCC = 2.8V | 12 | |
| Supply voltage for peripherals | VCC | 2.2 | 2.7 | V | Iline = 15mA; Ip = 1.2mA | 12 | |
| Voltage drop with external RVA | VLN | 3.5 | 4.5 | V | Iline = 15mA; RVA(LN to REG) = 68k; RVA(REG to SLPE) = 39k | 12 | |
| Microphone amplifier voltage gain | Gv | 50.5 | 52 | 53.5 | dB | Iline = 15mA; R7 = 68k | 12 |
| DTMF voltage gain to LN | Gv | 25.5 | 27 | dB | Iline = 15mA; R7 = 68k | 12 | |
| Receiving amplifier voltage gain IR to QR | Gv | 29.5 | 31 | 32.5 | dB | Iline = 15mA; RL = 300 | 13 |
| Output voltage rms RL=150 | Vo(rms) | 0.22 | V | THD = 2%; sine wave drive; R4 = 100k; Iline = 15 mA; Ip = 0 mA; RL = 150 | 13 | ||
| Output voltage rms RL=450 | Vo(rms) | 0.3 | V | THD = 2%; sine wave drive; R4 = 100k; Iline = 15 mA; Ip = 0 mA; RL = 450 | 13 | ||
| MUTE high level input voltage | VIH | 1.5 | V | Iline = 15 mA | 13 | ||
| Highest line current for maximum gain | IlineH | 20 | 23 | mA | Iline = 15 mA | 13 | |
| Lowest line current for minimum gain | IlineL | 61 | 65 | mA | Iline = 70 mA | 13 | |
| Operating line current normal operation | Iline | 11 | 140 | mA | Normal operation | 1 | |
| Operating line current reduced performance | Iline | 1 | 11 | mA | with Reduced Performance | 1 | |
| Exchange supply voltage | Vexch | 36 | 60 | V | 1 | ||
| Positive continuous line voltage | VLN | 12 | V | 11 | |||
| Repetitive line voltage during switch-on or line interruption | VLN(R) | 13.2 | V | 11 | |||
| Repetitive peak line voltage | VLN(RM) | 28 | V | 1ms pulse per 5s; R9 = 20; R10 = 13 | 11 | ||
| Line current | Iline | 140 | mA | R9 = 20; note 1 | 11 | ||
| Input voltage on all other pins | VI | -0.7 | V | Max is VCC+0.7 | 11 | ||
| Total power dissipation standard DIP | Ptot | 0.58 | W | R9 = 20; note 2 | 11 | ||
| Total power dissipation DIP with heatsink | Ptot | 0.67 | W | R9 = 20; note 2 | 11 | ||
| Operating ambient temperature | TA | -25 | 75 | oC | 11 | ||
| Storage temperature | Tstg | -40 | 125 | oC | 11 | ||
| Junction temperature | Tj | 125 | oC | 11 | |||
| Thermal resistance standard DIP | RθJA | 85 | oC/W | standard DIP | 11 | ||
| Thermal resistance DIP with heatsink | RθJA | 75 | oC/W | special DIP with heatsink | 11 | ||
| VLN temperature variation | ΔVLN/ΔT | -0.3 | mV/oC | Iline = 15mA | 12 | ||
| Microphone differential input impedance | Zi | 64 | kΩ | between MIC- and MIC+ | 12 | ||
| CMRR | CMRR | 82 | dB | 12 | |||
| Gain control range | Gv | 5.8 | dB | R6 = 110k; Iline = 70mA | 13 |
CAD (KiCad official)
- Symbol:
HT1062BRZ - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ht1062brz-etched.step/ht1062brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht1062brz.step/ht1062brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (16 pp, sha256
7b77ca8d7beca36c, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT1062BRZ
**HTCSEMI** · Analog To Digital Converters (ADCs) · SOP-16
HT1062BRZ from HTCSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LN | passive | Positive line terminal; continuous line voltage limited to 12 V maximum. |
| 2 | GAS1 | passive | Gain adjustment for the transmitting amplifier; resistor R7 to GAS2 sets microphone gain between 44 and 52 dB, with C6 to SLPE and C8 to VEE for stability. |
| 3 | GAS2 | passive | Gain adjustment for the transmitting amplifier; R7 connected between GAS1 and GAS2 sets the gain. |
| 4 | QR | output | Non-inverting output of the receiving amplifier with output impedance typically 4 ohms. |
| 5 | GAR | passive | Gain adjustment for the receiving amplifier; R4 between GAR and QR sets IR-to-QR gain between 20 and 31 dB. |
| 6 | MIC- | input | Inverting microphone input with 64 kohm differential input impedance (32 kohm single-ended). |
| 7 | MIC+ | input | Non-inverting microphone input with 64 kohm differential input impedance (32 kohm single-ended). |
| 8 | STAB | passive | Current stabilizer pin; a 3.6 kohm resistor to VEE sets the stabilizer current level. |
| 9 | VEE | power_in | Negative line terminal (ground reference, 0 V). |
| 10 | IR | input | Receiving amplifier input with input impedance typically 21 kohm. |
| 11 | DTMF | input | Dual-tone multi-frequency input with input impedance typically 20.7 kohm and gain to LN typically 25.5 dB. |
| 12 | MUTE | input | Mute input; active HIGH on HT1062B and active LOW on HT1062A, with VIH min 1.5 V and VIL max 0.3 V. |
| 13 | VCC | power_out | Positive supply decoupling pin that also supplies external circuits, typically 2.2 V minimum at Iline = 15 mA with Ip = 1.2 mA. |
| 14 | REG | passive | Voltage regulator decoupling pin, decoupled by a capacitor to VEE; a resistor RVA to SLPE raises the DC line voltage. |
| 15 | AGC | input | Automatic gain control input; resistor R6 to VEE sets line loss compensation, and the pin may be left open for maximum gain. |
| 16 | SLPE | passive | Slope (DC resistance) adjustment; external resistor R9, normally 20 ohms, connects to VEE. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-16 |
| Category | Data Converters |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Line voltage | VLN | 3.55 | 4 | 4.25 | V | MIC inputs open-circuit; Iline = 15mA | 12 |
| Supply current | ICC | | 0.9 | 1.35 | mA | VCC = 2.8V | 12 |
| Supply voltage for peripherals | VCC | 2.2 | 2.7 | | V | Iline = 15mA; Ip = 1.2mA | 12 |
| Voltage drop with external RVA | VLN | 3.5 | | 4.5 | V | Iline = 15mA; RVA(LN to REG) = 68k; RVA(REG to SLPE) = 39k | 12 |
| Microphone amplifier voltage gain | Gv | 50.5 | 52 | 53.5 | dB | Iline = 15mA; R7 = 68k | 12 |
| DTMF voltage gain to LN | Gv | | 25.5 | 27 | dB | Iline = 15mA; R7 = 68k | 12 |
| Receiving amplifier voltage gain IR to QR | Gv | 29.5 | 31 | 32.5 | dB | Iline = 15mA; RL = 300 | 13 |
| Output voltage rms RL=150 | Vo(rms) | 0.22 | | | V | THD = 2%; sine wave drive; R4 = 100k; Iline = 15 mA; Ip = 0 mA; RL = 150 | 13 |
| Output voltage rms RL=450 | Vo(rms) | 0.3 | | | V | THD = 2%; sine wave drive; R4 = 100k; Iline = 15 mA; Ip = 0 mA; RL = 450 | 13 |
| MUTE high level input voltage | VIH | 1.5 | | | V | Iline = 15 mA | 13 |
| Highest line current for maximum gain | IlineH | 20 | | 23 | mA | Iline = 15 mA | 13 |
| Lowest line current for minimum gain | IlineL | 61 | | 65 | mA | Iline = 70 mA | 13 |
| Operating line current normal operation | Iline | 11 | | 140 | mA | Normal operation | 1 |
| Operating line current reduced performance | Iline | 1 | | 11 | mA | with Reduced Performance | 1 |
| Exchange supply voltage | Vexch | 36 | | 60 | V | | 1 |
| Positive continuous line voltage | VLN | | | 12 | V | | 11 |
| Repetitive line voltage during switch-on or line interruption | VLN(R) | | | 13.2 | V | | 11 |
| Repetitive peak line voltage | VLN(RM) | | | 28 | V | 1ms pulse per 5s; R9 = 20; R10 = 13 | 11 |
| Line current | Iline | | | 140 | mA | R9 = 20; note 1 | 11 |
| Input voltage on all other pins | VI | -0.7 | | | V | Max is VCC+0.7 | 11 |
| Total power dissipation standard DIP | Ptot | | | 0.58 | W | R9 = 20; note 2 | 11 |
| Total power dissipation DIP with heatsink | Ptot | | | 0.67 | W | R9 = 20; note 2 | 11 |
| Operating ambient temperature | TA | -25 | | 75 | oC | | 11 |
| Storage temperature | Tstg | -40 | | 125 | oC | | 11 |
| Junction temperature | Tj | | | 125 | oC | | 11 |
| Thermal resistance standard DIP | RθJA | | 85 | | oC/W | standard DIP | 11 |
| Thermal resistance DIP with heatsink | RθJA | | 75 | | oC/W | special DIP with heatsink | 11 |
| VLN temperature variation | ΔVLN/ΔT | | -0.3 | | mV/oC | Iline = 15mA | 12 |
| Microphone differential input impedance | Zi | | 64 | | kΩ | between MIC- and MIC+ | 12 |
| CMRR | CMRR | | 82 | | dB | | 12 |
| Gain control range | Gv | | 5.8 | | dB | R6 = 110k; Iline = 70mA | 13 |
## CAD (KiCad official)
- Symbol: `HT1062BRZ`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `ht1062brz-etched.step` / `ht1062brz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht1062brz.step` / `ht1062brz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht1062brz-datasheet.pdf) (16 pp, sha256 `7b77ca8d7beca36c`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht1062brz-datasheet.pdf)