main
History Download
Ray Publish 0.1.0 71ff839

HSN65LBC184DR

HXY MOSFET · RS-485/RS-422 ICs · SOP-8

HSN65LBC184DR from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Receiver data output that goes high when A − B ≥ 0.2 V and low when A − B ≤ −0.2 V, with receiver output current limited to ±20 mA absolute maximum.
2 RE input Active-LOW receiver enable; when RE is high the receiver output R is high impedance (off), and RE input levels are VIH 2 V minimum and VIL 0.8 V maximum.
3 DE input Active-HIGH driver enable; when DE is low the bus outputs A and B are high impedance (off), and DE input levels are VIH 2 V minimum and VIL 0.8 V maximum.
4 D input Driver data input; with DE high, D high drives A high and B low, D low drives A low and B high, and D input levels are VIH 2 V minimum and VIL 0.8 V maximum.
5 GND power_in Reference potential, the local device ground; all voltages except differential bus voltage are referenced to network ground.
6 A bidirectional Bus input/output, driver output or receiver input complementary to B; recommended bus terminal voltage is −7 V to 12 V, with a continuous absolute range of −15 V to 15 V.
7 B bidirectional Bus input/output, driver output or receiver input complementary to A; recommended bus terminal voltage is −7 V to 12 V, with a continuous absolute range of −15 V to 15 V.
8 VCC power_in Supply voltage, 4.75 V to 5.25 V recommended (5 V typical), with an absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.75 5 5.25 V 4
Voltage at any bus terminal (separately or common mode) VI or VIC -7 12 V 4
High-level input voltage D, DE, RE VIH 2 V D, DE, and RE 4
Low-level input voltage D, DE, RE VIL 0.8 V D, DE, and RE 4
Differential input voltage /VID/ 12 V 4
Driver high-level output current IOH -60 mA Driver 4
Receiver high-level output current IOH -8 mA Receiver 4
Driver low-level output current IOL 60 mA Driver 4
Receiver low-level output current IOL 4 mA Receiver 4
Operating free-air temperature (HSN65LBC184) TA -40 85 °C HSN65LBC184 4
Supply voltage VCC -0.5 7 V 3
Continuous voltage range at any bus terminal -15 15 V 3
Data input/output voltage -0.3 7 V 3
Receiver output current IO -20 20 mA 3
Storage temperature Tstg 160 °C 3
Supply current, driver, DE = RE = 5 V ICC 12 25 mA DE = RE = 5 V, No Load 5
Supply current, driver, DE = 0 V ICC 175 300 μA DE = 0 V, RE = 5 V, No Load 5
High-level input current (D, DE, RE) IIH 50 μA VI = 2.4 V 5
Low-level input current (D, DE, RE) IIL -50 μA VI = 0.4 V 5
Short-circuit output current IOS -250 -120 mA VO = -7 V 5
Short-circuit output current IOS 250 mA VO = VCC 5
Output voltage VO 0 V Voa, Vob; IO = 0; printed max is VCC 5
Peak-to-peak change in common-mode output voltage during state transitions VOC(PP) 0.8 V See Figure 9 and Figure 10 5
Common-mode output voltage VOC 1 3 V /Vos/; See Figure 8 5
Magnitude of change in common-mode steady-state output voltage /ΔVOC(SS)/ 0.1 V /Vos, Vos/; See Figure 10 5
Magnitude of differential output voltage /VOD/ 1.5 6 V IO = 0 5
Magnitude of differential output voltage /VOD/ 1.5 V RL = 54 Ω, See Figure 8 5
Change in differential voltage magnitude between logic states Δ/VOD/ 0.1 V RL = 54 Ω 5
Differential output delay time, low-to-high-level output td(DH) 1.3 μs 4
Differential output delay time, high-to-low-level output td(DL) 1.3 μs 4
Propagation delay time, low-to-high-level output tPLH 0.5 1.3 μs RL = 54 Ω, CL = 50 pF, See Figure 9 4
Propagation delay time, high-to-low-level output tPHL 0.5 1.3 μs RL = 54 Ω, CL = 50 pF, See Figure 9 4
Pulse skew (/td(DH), td(DL)/) tsk(p) 75 150 ns 4
Rise time, single-ended tr 0.25 1.2 μs 4
Fall time, single-ended tf 0.25 1.2 μs 4
Output enable time to high level tPZH 3.5 μs RL = 110 Ω, See Figure 6 4
Output enable time to low level tPZL 3.5 μs RL = 110 Ω, See Figure 7 4
Output disable time from high level tPHZ 2 μs RL = 110 Ω, See Figure 6 4
Output disable time from low level tPLZ 2 μs RL = 110 Ω, See Figure 7 4
Supply current (total package) ICC 3.9 mA DE = RE = 0 V, No Load 5
Supply current (total package) ICC 300 μA RE = 5 V, DE = 0 V, No Load 5
Input current II 250 μA VI = 12 V; also VI = 12 V, VCC = 0; other input = 0 V 5
Input current II -200 μA VI = -7 V; also VI = -7 V, VCC = 0; other input = 0 V 5
High-impedance-state output current IOZ -100 100 μA VO = 0.4 V to 2.4 V 5
Positive-going input threshold voltage VIT+ 200 V As printed; likely mV typo 5
Negative-going input threshold voltage VIT- -200 mV 5
High-level output voltage VOH 2.8 V IOH = -8 mA, See Figure 11 5
Low-level output voltage VOL 0.4 V IOL = 4 mA, See Figure 11 5
Propagation delay time, low-to-high-level output tPLH 150 ns CL = 50 pF, See Figure 11 6
Propagation delay time, high-to-low-level output tPHL 150 ns CL = 50 pF, See Figure 11 6
Pulse skew (/tPHL, tPLH/) tsk(p) 50 ns 6
Output enable time to high level tPZH 100 ns See Figure 12 6
Output enable time to low level tPZL 100 ns See Figure 12 6
Output disable time from high level tPHZ 100 ns See Figure 12 6
Output disable time from low level tPLZ 100 ns See Figure 12 6
Junction-to-ambient thermal resistance (SOP-8) RθJA 172.4 °C/W D [SOP-8] 4
Junction-to-case (top) thermal resistance (SOP-8) RθJC(top) 42.5 °C/W D [SOP-8] 4
Junction-to-board thermal resistance (SOP-8) RθJB 41.4 °C/W D [SOP-8] 4
Junction-to-top characterization parameter (SOP-8) ψJT 4.6 °C/W D [SOP-8] 4

CAD (KiCad official)

  • Symbol: HSN65LBC184DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hsn65lbc184dr-etched.step / hsn65lbc184dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hsn65lbc184dr.step / hsn65lbc184dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (14 pp, sha256 9048a11ffd8c465e, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF