main
Ray
Publish 0.1.0
c176a22
HSN65HVD12DR
HXY MOSFET · RS-485 / RS-422 ICs · SOP-8
HSN65HVD12DR from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: driven high when VA exceeds VB by more than 200 mV and driven low when VA is below VB by more than 200 mV. |
| 2 | RE | input | Receiver output enable, active low: when RE is high the receiver output RO is placed in high-impedance state. |
| 3 | DE | input | Driver output enable, active high: when DE is low the driver outputs A and B are high-impedance, and DE high puts the device in transmit mode (with RE low, DE low selects receive mode). |
| 4 | DI | input | Driver input: DI low drives A high and B low, and DI high gives the opposite output states. |
| 5 | GND | power_in | Ground, the negative power supply terminal. |
| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output; the receiver common-mode input range is stated as -7 V to +12 V. |
| 7 | B | bidirectional | Receiver inverting input and driver inverting output; the receiver common-mode input range is stated as -7 V to +12 V. |
| 8 | VCC | power_in | Positive power supply terminal, operated from a single 5 V supply per the datasheet. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential output voltage, RL=27Ω | VOD2 | 1.5 | V | Fig.1, RL=27Ω | 2 | ||
| Differential output voltage change in magnitude | VOD | 0.2 | V | Fig.1, RL=27Ω | 2 | ||
| Common-mode output voltage | VOC | 3 | V | Fig.1, RL=27Ω | 2 | ||
| Common-mode output voltage change amplitude | VOC | 0.2 | V | Fig.1, RL=27Ω | 2 | ||
| Input signal high level | VIH | 2 | V | DE, DI, REB | 2 | ||
| Input signal low level | VIL | 0.8 | V | DE, DI, REB | 2 | ||
| Control pin input current | IIN1 | -2 | 2 | μA | DE, DI, REB | 2 | |
| A/B pin input current | IIN2 | 1 | mA | DE=0, Vcc=0V or 5.25V; VIN=12V | 2 | ||
| A/B pin input current | IIN2 | -0.8 | mA | DE=0, Vcc=0V or 5.25V; VIN=-7V | 2 | ||
| Output short-circuit current | IOSD | -250 | 250 | mA | -7V VOUT 12V | 2 | |
| Receiver differential threshold voltage | VTH | -200 | 200 | mV | 2 | ||
| Receiver input hysteresis | VTH | 30 | mV | 2 | |||
| Receiver output low voltage | VOL | 0.4 | V | Io= 4mA, VID= -200mV | 2 | ||
| Receiver tri-state output current | IOZR | 1 | μA | 0.4V VCM 2.4V | 2 | ||
| Receiver input resistance | RIN | 32 | kΩ | -7V VCM +12V | 2 | ||
| Receiver short-circuit current | IOSR | 7 | 95 | mA | Fig. 6, 0V VRO Vcc | 2 | |
| Supply current (DE=Vcc) | Icc | 155 | 900 | μA | 无负载, /RE= GND, DI= Vcc or GND. DE= Vcc | 2 | |
| Supply current (DE=GND) | Icc | 160 | 600 | μA | 无负载, /RE= GND, DI= Vcc or GND. DE= GND | 2 | |
| Supply voltage | -0.3 | 8 | V | 3 | |||
| Control input voltage (/RE, DE) | -0.3 | V | 3 | ||||
| Receiver output voltage (RO) | -0.3 | V | 3 | ||||
| Driver input voltage (DI) | -0.3 | V | 3 | ||||
| Receiver input signal voltage (A, B) | 13 | V | 3 | ||||
| Driver output voltage (A, B) | 13 | V | 3 | ||||
| Operating temperature | TOP | 0 | 85 | °C | 3 | ||
| Storage temperature | TSTO | -65 | 150 | °C | 3 | ||
| Receiver input to output propagation delay | 20 | 60 | 200 | ns | RDIFF=50Ω, CL1=CL2=100pF | 3 | |
| Driver output skew to output | 30 | ns | 3 | ||||
| Differential receiver propagation delay skew | /tPLH- tPHL/ | 20 | ns | 3 | |||
| Maximum data rate | MAX | 2.5 | Mbps | 3 |
CAD (KiCad official)
- Symbol:
HSN65HVD12DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hsn65hvd12dr-etched.step/hsn65hvd12dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hsn65hvd12dr.step/hsn65hvd12dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
24abfe59415cd464, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HSN65HVD12DR
**HXY MOSFET** · RS-485 / RS-422 ICs · SOP-8
HSN65HVD12DR from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: driven high when VA exceeds VB by more than 200 mV and driven low when VA is below VB by more than 200 mV. |
| 2 | RE | input | Receiver output enable, active low: when RE is high the receiver output RO is placed in high-impedance state. |
| 3 | DE | input | Driver output enable, active high: when DE is low the driver outputs A and B are high-impedance, and DE high puts the device in transmit mode (with RE low, DE low selects receive mode). |
| 4 | DI | input | Driver input: DI low drives A high and B low, and DI high gives the opposite output states. |
| 5 | GND | power_in | Ground, the negative power supply terminal. |
| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output; the receiver common-mode input range is stated as -7 V to +12 V. |
| 7 | B | bidirectional | Receiver inverting input and driver inverting output; the receiver common-mode input range is stated as -7 V to +12 V. |
| 8 | VCC | power_in | Positive power supply terminal, operated from a single 5 V supply per the datasheet. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential output voltage, RL=27Ω | VOD2 | 1.5 | | | V | Fig.1, RL=27Ω | 2 |
| Differential output voltage change in magnitude | VOD | | | 0.2 | V | Fig.1, RL=27Ω | 2 |
| Common-mode output voltage | VOC | | | 3 | V | Fig.1, RL=27Ω | 2 |
| Common-mode output voltage change amplitude | VOC | | | 0.2 | V | Fig.1, RL=27Ω | 2 |
| Input signal high level | VIH | 2 | | | V | DE, DI, REB | 2 |
| Input signal low level | VIL | | | 0.8 | V | DE, DI, REB | 2 |
| Control pin input current | IIN1 | -2 | | 2 | μA | DE, DI, REB | 2 |
| A/B pin input current | IIN2 | | | 1 | mA | DE=0, Vcc=0V or 5.25V; VIN=12V | 2 |
| A/B pin input current | IIN2 | -0.8 | | | mA | DE=0, Vcc=0V or 5.25V; VIN=-7V | 2 |
| Output short-circuit current | IOSD | -250 | | 250 | mA | -7V VOUT 12V | 2 |
| Receiver differential threshold voltage | VTH | -200 | | 200 | mV | | 2 |
| Receiver input hysteresis | VTH | | 30 | | mV | | 2 |
| Receiver output low voltage | VOL | | | 0.4 | V | Io= 4mA, VID= -200mV | 2 |
| Receiver tri-state output current | IOZR | | | 1 | μA | 0.4V VCM 2.4V | 2 |
| Receiver input resistance | RIN | 32 | | | kΩ | -7V VCM +12V | 2 |
| Receiver short-circuit current | IOSR | 7 | | 95 | mA | Fig. 6, 0V VRO Vcc | 2 |
| Supply current (DE=Vcc) | Icc | | 155 | 900 | μA | 无负载, /RE= GND, DI= Vcc or GND. DE= Vcc | 2 |
| Supply current (DE=GND) | Icc | | 160 | 600 | μA | 无负载, /RE= GND, DI= Vcc or GND. DE= GND | 2 |
| Supply voltage | | -0.3 | | 8 | V | | 3 |
| Control input voltage (/RE, DE) | | -0.3 | | | V | | 3 |
| Receiver output voltage (RO) | | -0.3 | | | V | | 3 |
| Driver input voltage (DI) | | -0.3 | | | V | | 3 |
| Receiver input signal voltage (A, B) | | | | 13 | V | | 3 |
| Driver output voltage (A, B) | | | | 13 | V | | 3 |
| Operating temperature | TOP | 0 | | 85 | °C | | 3 |
| Storage temperature | TSTO | -65 | | 150 | °C | | 3 |
| Receiver input to output propagation delay | | 20 | 60 | 200 | ns | RDIFF=50Ω, CL1=CL2=100pF | 3 |
| Driver output skew to output | | | 30 | | ns | | 3 |
| Differential receiver propagation delay skew | /tPLH- tPHL/ | | 20 | | ns | | 3 |
| Maximum data rate | MAX | | | 2.5 | Mbps | | 3 |
## CAD (KiCad official)
- Symbol: `HSN65HVD12DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hsn65hvd12dr-etched.step` / `hsn65hvd12dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hsn65hvd12dr.step` / `hsn65hvd12dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602879090865696768) (8 pp, sha256 `24abfe59415cd464`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hsn65hvd12dr-datasheet.pdf)