component
HS1M
Public Made by Adomby adom
LGE High Effic Rectifier, DO-214AC(SMA). Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
HS1M
LGE · High Effic Rectifier · DO-214AC(SMA)
HS1M from LGE, in a DO-214AC(SMA). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LGE |
| Package | DO-214AC(SMA) |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | 1000 | V | 1 | |||
| Maximum RMS Voltage | VRMS | 700 | V | 1 | |||
| Maximum DC Blocking Voltage | VDC | 1000 | V | 1 | |||
| Maximum Average Forward Rectified Current | I(AV) | 1 | A | See Fig.1 | 1 | ||
| Peak Forward Surge Current | IFSM | 30 | A | 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) | 1 | ||
| Maximum Instantaneous Forward Voltage | VF | 1.7 | V | @ 1.0A | 1 | ||
| Maximum DC Reverse Current | IR | 5 | uA | @ TA=25°C, at rated DC blocking voltage | 1 | ||
| Maximum DC Reverse Current | IR | 150 | uA | @ TA=125°C, at rated DC blocking voltage | 1 | ||
| Maximum Reverse Recovery Time | Trr | 75 | nS | IF=0.5A, IR=1.0A, IRR=0.25A (Note 1) | 1 | ||
| Maximum Thermal Resistance | RθJA | 70 | °C/W | Mounted on P.C.Board with 0.2" x 0.2" (5mm x 5mm) copper pad area (Note 3) | 1 | ||
| Operating Temperature Range | TJ | -55 | 150 | °C | 1 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 1 | ||
| Typical Junction Capacitance | Cj | 15 | pF | Measured at 1 MHz and Applied VR=4.0 Volts (Note 2) | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Pure tin plated, lead free Polarity: Indicated by cathode band | 1 |
CAD (KiCad official)
- Symbol:
HS1M - Footprint:
Diode_SMD:D_SMA - 3D model: DO-214AC(SMA) (KiCad packages3D, STEP)
- 3D model files:
hs1m-etched.step/hs1m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hs1m.step/hs1m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LGE datasheet (2 pp, sha256
122d88eb4dc30934, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarycathode-band convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HS1M
**LGE** · High Effic Rectifier · DO-214AC(SMA)
HS1M from LGE, in a DO-214AC(SMA). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LGE |
| Package | DO-214AC(SMA) |
| Category | Diodes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Recurrent Peak Reverse Voltage | VRRM | | | 1000 | V | | 1 |
| Maximum RMS Voltage | VRMS | | | 700 | V | | 1 |
| Maximum DC Blocking Voltage | VDC | | | 1000 | V | | 1 |
| Maximum Average Forward Rectified Current | I(AV) | | | 1 | A | See Fig.1 | 1 |
| Peak Forward Surge Current | IFSM | | | 30 | A | 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) | 1 |
| Maximum Instantaneous Forward Voltage | VF | | | 1.7 | V | @ 1.0A | 1 |
| Maximum DC Reverse Current | IR | | | 5 | uA | @ TA=25°C, at rated DC blocking voltage | 1 |
| Maximum DC Reverse Current | IR | | | 150 | uA | @ TA=125°C, at rated DC blocking voltage | 1 |
| Maximum Reverse Recovery Time | Trr | | | 75 | nS | IF=0.5A, IR=1.0A, IRR=0.25A (Note 1) | 1 |
| Maximum Thermal Resistance | RθJA | | | 70 | °C/W | Mounted on P.C.Board with 0.2" x 0.2" (5mm x 5mm) copper pad area (Note 3) | 1 |
| Operating Temperature Range | TJ | -55 | | 150 | °C | | 1 |
| Storage Temperature Range | TSTG | -55 | | 150 | °C | | 1 |
| Typical Junction Capacitance | Cj | | 15 | | pF | Measured at 1 MHz and Applied VR=4.0 Volts (Note 2) | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Pure tin plated, lead free Polarity: Indicated by cathode band | 1 |
## CAD (KiCad official)
- Symbol: `HS1M`
- Footprint: `Diode_SMD:D_SMA`
- 3D model: DO-214AC(SMA) (KiCad packages3D, STEP)
- 3D model files: `hs1m-etched.step` / `hs1m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hs1m.step` / `hs1m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LGE datasheet](docs/hs1m-datasheet.pdf) (2 pp, sha256 `122d88eb4dc30934`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `cathode-band convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hs1m-datasheet.pdf)