component
HRT9013-33GB
Public Made by Adomby adom
HXY MOSFET Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHRT9013-33GB
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
HRT9013-33GB from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin for the regulator; the absolute maximum input voltage is 7 V. |
| 2 | VSS | power_in | Ground pin, the reference for the regulator and the CE pin. |
| 3 | CE | input | Enable input; the datasheet recommends a 1.1 V enable level to allow for temperature and process variation, low level is 0.5 V max, and there is an internal 1 MΩ resistor between CE and VSS. |
| 4 | NC | unconnected | Not connected (floating) pin. |
| 5 | VOUT | power_out | Regulated output; the HRT9013-33GB is specified at 3.3 V nominal (VOUT(T) ±2%) with up to 500 mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance (VOUT(E)) | VOUT(E) | 0.98 | 1.02 | ×VOUT(T) | IOUT=1mA, VIN=5V, VCE=1.6V; printed as VOUT(T)*0.98 to VOUT(T)*1.02 | 3 | |
| Maximum output current | IOUT (max) | 500 | mA | 3 | |||
| Load regulation | ΔVOUT | 50 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 3 | ||
| Input regulation | ΔVOUT/(ΔVIN•VOUT) | 0.39 | %/V | IOUT=40mA, 4.3V≤VIN≤15V | 3 | ||
| Dropout voltage 1 | Vdrop1 | 100 | mV | VIN=4.3V, IOUT=100mA | 3 | ||
| Dropout voltage 2 | Vdrop2 | 300 | mV | VIN=4.3V, IOUT=200mA | 3 | ||
| Quiescent current | ISS1 | 75 | μA | 3 | |||
| Shutdown current | ISS2 | 1 | μA | VIN=5V, VCE=VSS | 3 | ||
| CE input voltage high | VCEH | 0.3 | V | 3 | |||
| CE input voltage low | VCEL | 0 | 0.5 | V | 3 | ||
| CE input current | ICE | 1 | uA | 3 | |||
| Power supply rejection ratio | PSRR | 75 | dB | VIN=(VOUT+1)+1Vp-pAC, IOUT=40mA, f=1kHz | 3 | ||
| Output noise voltage | en | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 3 | ||
| Nominal output voltage (HRT9013-33GB) | VOUT(T) | 3.3 | V | Part-number designation HRT9013-33GB | 1 | ||
| Input voltage | VIN | 7 | V | 2 | |||
| Output current | IOUT | 600 | mA | 2 | |||
| Output voltage range | VOUT | -0.3 | 0.3 | V | Printed as Vss-0.3 to VIN+0.3 (min offset from VSS, max offset from VIN) | 2 | |
| Enable voltage range | VCE | -0.3 | 0.3 | V | Printed as Vss-0.3 to VIN+0.3 (min offset from VSS, max offset from VIN) | 2 | |
| Power dissipation | PD | 300 | mW | 2 | |||
| Operating temperature range | TOPR | -40 | 80 | °C | 2 | ||
| Storage temperature range | TSTG | -40 | 150 | °C | 2 | ||
| Soldering temperature | 260 | °C | 10 sec | 2 | |||
| Operating junction temperature | -40 | 85 | °C | Junction temperature operation (feature list) | 1 | ||
| Recommended CE enable voltage | VCE | 1.1 | V | Recommended CE enable setting to allow margin over temperature and process | 3 | ||
| Internal CE pin to GND resistance | 1 | MΩ | Built-in between CE pin and GND pin (printed as 1M) | 3 |
CAD (KiCad official)
- Symbol:
HRT9013-33GB - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
hrt9013-33gb-etched.step/hrt9013-33gb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hrt9013-33gb.step/hrt9013-33gb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
1b9ab4edc9cdf58c, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).