component

HR911130A

Public Made by Adom

by adom

HANRUN(Zhongshan HanRun Elec) Modular/Ethernet Connector (RJ45) Jacks With Magnetics, Through Hole. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectorshr911130aboard-derived

Verified HR911130A

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against HanRun's HR911130A datasheet (Rev. B)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the JLCPCB copy with HanRun's own PDF, linked from the HR911130A product page on hanrun.com (https://www.hanrun.com/rj45_1000/203.html) and served from HanRun's file store; 4 pages, Rev. B (no date printed; PDF created 2020-02-28), retrieved 2026-10-27
  • •Datasheet text layer: HanRun's PDF draws the schematic and drawing labels as vector outlines, so the attached copy is the same 4 pages with an OCR text layer added (ocrmypdf 15.2 / tesseract 5.3) for the pin-name text check; the unmodified HanRun file has sha256 d3a5d7212145ea71b6f643d90478eac1cdb08ef26a191cac525d4ab7fb344ac1
  • ✓All 14 numbered pins match the schematic (p.1) by number and name: P1, MDI 0+ P2, MDI 0- P3, MDI 1+ P4, MDI 2+ P5, MDI 2- P6, MDI 1- P7, MDI 3+ P8, MDI 3- P9, P10, LED pins 11-14; the page keeps MDI0+ etc. without the space the drawing prints between MDI and the pair number, with ASCII hyphens for the drawing's minus signs. No pin renamed
  • ✓LED polarity from the schematic (p.1): green 11 anode -> 12 cathode, yellow 14 anode -> 13 cathode; green is the left LED and yellow the right LED seen from the front (p.2); 568/585 nm, VF 1.8/2.8 V, 20 mA (p.2)
  • ✓All 16 descriptions rewritten from the datasheet. The old ones had wrong cable-side routing for pins 5, 6 and 7 (the schematic routes MDI 2+ to J4 C+, MDI 2- to J5 C-, MDI 1- to J6 B-) and described P1 as the termination return (P1 is the chip-side centre-tap common; P10 is the 4 x 75 ohm / 1000 pF 2 kV termination return)
  • •Shield pins S1/S2 are unnamed in the drawing (two 1.63 mm holes on the layout, p.3); the page keeps the name SHIELD
  • ✓Footprint vs the recommended PCB layout (p.3, component side view): signal pins 1-10 on 0.89 mm drills at 1.27 mm stagger (2.54 mm within a row), rows 6.35 and 8.89 mm behind the post line, pin 1 at the right end of the rear row; footprint pads at x = +/-5.72, 4.44, 3.18, 1.90, 0.64 vs the drawing's 0.635-mm grid (5.715, 4.445, ...), within 0.005 mm; LED pins on 1.02 mm drills at 13.25 mm outer / 2.54 mm pairs, 4.90 mm in front of the post line; 3.25 mm NPTH posts 11.43 mm apart; 1.63 mm shield holes 15.49 mm apart, 3.05 mm behind the post line. Pin 1 position and LED order (14, 13 ... 12, 11 left to right) match
  • ✓3D body vs the mechanical drawing (p.2, tolerance +/-0.25): 16.04 x 21.30 x 13.50 mm against B 16.00, A 21.20, C 13.30; front face 10.92 mm and rear 10.38 mm from the post line against 10.80 / 10.40 (p.3); Z-up, seated on z = 0, the model's 18 pins sit on the footprint's 18 holes
  • •3D pin tails reach 3.05 mm below the seating plane against D 3.50 +/-0.30 mm (p.2): 0.15 mm shorter than the minimum; body and footprint unaffected
  • •DigiKey and Mouser do not carry HR911130A (searched 2026-10-27); LCSC C54408 kept
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (HanRun, Rev. B)product page (hanrun.com)
Verified files✓ hr911130a.kicad_sym✓ hr911130a.kicad_mod✓ hr911130a.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓16 of 16 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! hr911130a.kicad_sym! hr911130a.kicad_mod✓ hr911130a.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
hr911130a / hr911130a.lbr
HistoryDownload
Caleb Publish 0.1.3 8d04d1d 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.6.2">
<drawing>
<settings><setting alwaysvectorfont="no"/></settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
<layer number="114" name="User4" color="13" fill="1" visible="yes" active="yes"/>
</layers>
<library>
<description>0℃~+70℃ 1 Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With Cross Pin With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHS</description>
<packages>
<package name="HR911130A">
  <description>16 pads, 17.9 x 15.3 mm</description>
  <pad name="1" x="5.7200" y="-8.8900" drill="0.8900" diameter="1.3980" shape="square"/>
  <pad name="2" x="4.4400" y="-6.3500" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="3" x="3.1800" y="-8.8900" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="4" x="1.9000" y="-6.3500" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="5" x="0.6400" y="-8.8900" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="6" x="-0.6400" y="-6.3500" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="7" x="-1.9000" y="-8.8900" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="8" x="-3.1800" y="-6.3500" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="9" x="-4.4400" y="-8.8900" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="10" x="-5.7200" y="-6.3500" drill="0.8900" diameter="1.3980" shape="round"/>
  <pad name="11" x="6.6250" y="4.9000" drill="1.0200" diameter="1.5300" shape="round"/>
  <pad name="12" x="4.0850" y="4.9000" drill="1.0200" diameter="1.5300" shape="round"/>
  <pad name="13" x="-4.0850" y="4.9000" drill="1.0200" diameter="1.5300" shape="round"/>
  <pad name="14" x="-6.6250" y="4.9000" drill="1.0200" diameter="1.5300" shape="round"/>
  <pad name="S1" x="7.7450" y="-3.0500" drill="1.6300" diameter="2.4450" shape="round"/>
  <pad name="S2" x="-7.7450" y="-3.0500" drill="1.6300" diameter="2.4450" shape="round"/>
  <wire x1="8.0500" y1="10.9200" x2="-8.0500" y2="10.9200" width="0.1270" layer="114"/>
  <text x="0" y="7.030" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
  <text x="0" y="-10.888" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
  <hole x="-5.7150" y="-0.0000" drill="3.25"/>
  <hole x="5.7150" y="-0.0000" drill="3.25"/>
</package>
</packages>
<symbols>
<symbol name="HR911130A">
  <description>0℃~+70℃ 1 Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With Cross Pin With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHS</description>
  <wire x1="-7.62" y1="-30.48" x2="7.62" y2="-30.48" width="0.254" layer="94"/>
  <wire x1="7.62" y1="-30.48" x2="7.62" y2="27.94" width="0.254" layer="94"/>
  <wire x1="7.62" y1="27.94" x2="-7.62" y2="27.94" width="0.254" layer="94"/>
  <wire x1="-7.62" y1="27.94" x2="-7.62" y2="-30.48" width="0.254" layer="94"/>
  <wire x1="-7.6200" y1="-2.5400" x2="-2.5400" y2="-2.5400" width="0.0254" layer="94"/>
  <wire x1="-7.6200" y1="-15.2400" x2="-2.5400" y2="-15.2400" width="0.0254" layer="94"/>
  <wire x1="-3.6830" y1="-7.1120" x2="-2.5400" y2="-7.1120" width="0.2540" layer="94"/>
  <wire x1="-3.6830" y1="-19.8120" x2="-2.5400" y2="-19.8120" width="0.2540" layer="94"/>
  <wire x1="-3.5560" y1="-5.4610" x2="-2.5400" y2="-7.1120" width="0.2540" layer="94"/>
  <wire x1="-3.5560" y1="-5.4610" x2="-1.5240" y2="-5.4610" width="0.2540" layer="94"/>
  <wire x1="-3.5560" y1="-18.1610" x2="-2.5400" y2="-19.8120" width="0.2540" layer="94"/>
  <wire x1="-3.5560" y1="-18.1610" x2="-1.5240" y2="-18.1610" width="0.2540" layer="94"/>
  <wire x1="-2.5400" y1="-2.5400" x2="-2.5400" y2="-5.3340" width="0.0254" layer="94"/>
  <wire x1="-2.5400" y1="-7.1120" x2="-1.5240" y2="-5.4610" width="0.2540" layer="94"/>
  <wire x1="-2.5400" y1="-7.1120" x2="-1.2700" y2="-7.1120" width="0.2540" layer="94"/>
  <wire x1="-2.5400" y1="-7.2390" x2="-2.5400" y2="-10.1600" width="0.0254" layer="94"/>
  <wire x1="-2.5400" y1="-10.1600" x2="-7.6200" y2="-10.1600" width="0.0254" layer="94"/>
  <wire x1="-2.5400" y1="-15.2400" x2="-2.5400" y2="-18.0340" width="0.0254" layer="94"/>
  <wire x1="-2.5400" y1="-19.8120" x2="-1.5240" y2="-18.1610" width="0.2540" layer="94"/>
  <wire x1="-2.5400" y1="-19.8120" x2="-1.2700" y2="-19.8120" width="0.2540" layer="94"/>
  <wire x1="-2.5400" y1="-19.9390" x2="-2.5400" y2="-22.8600" width="0.0254" layer="94"/>
  <wire x1="-2.5400" y1="-22.8600" x2="-7.6200" y2="-22.8600" width="0.0254" layer="94"/>
  <wire x1="-0.7620" y1="-6.4770" x2="0.2540" y2="-7.4930" width="0.0254" layer="94"/>
  <wire x1="-0.7620" y1="-19.1770" x2="0.2540" y2="-20.1930" width="0.0254" layer="94"/>
  <wire x1="-0.6350" y1="-5.3340" x2="0.3810" y2="-6.3500" width="0.0254" layer="94"/>
  <wire x1="-0.6350" y1="-18.0340" x2="0.3810" y2="-19.0500" width="0.0254" layer="94"/>
  <wire x1="0.2540" y1="-7.4930" x2="-0.1270" y2="-6.6040" width="0.0254" layer="94"/>
  <wire x1="-0.1270" y1="-6.6040" x2="-0.6350" y2="-7.1120" width="0.0254" layer="94"/>
  <wire x1="-0.6350" y1="-7.1120" x2="0.2540" y2="-7.4930" width="0.0254" layer="94"/>
  <wire x1="0.2540" y1="-20.1930" x2="-0.1270" y2="-19.3040" width="0.0254" layer="94"/>
  <wire x1="-0.1270" y1="-19.3040" x2="-0.6350" y2="-19.8120" width="0.0254" layer="94"/>
  <wire x1="-0.6350" y1="-19.8120" x2="0.2540" y2="-20.1930" width="0.0254" layer="94"/>
  <wire x1="0.3810" y1="-6.3500" x2="0.0000" y2="-5.4610" width="0.0254" layer="94"/>
  <wire x1="0.0000" y1="-5.4610" x2="-0.5080" y2="-5.9690" width="0.0254" layer="94"/>
  <wire x1="-0.5080" y1="-5.9690" x2="0.3810" y2="-6.3500" width="0.0254" layer="94"/>
  <wire x1="0.3810" y1="-19.0500" x2="0.0000" y2="-18.1610" width="0.0254" layer="94"/>
  <wire x1="0.0000" y1="-18.1610" x2="-0.5080" y2="-18.6690" width="0.0254" layer="94"/>
  <wire x1="-0.5080" y1="-18.6690" x2="0.3810" y2="-19.0500" width="0.0254" layer="94"/>
  <text x="-7.6200" y="29.2100" size="1.27" layer="95" align="center">&gt;NAME</text>
  <text x="-7.6200" y="-31.7500" size="1.27" layer="96" align="center">&gt;VALUE</text>
  <pin name="11" x="-12.7" y="-2.54" length="middle" direction="pas"/>
  <pin name="12" x="-12.7" y="-10.16" length="middle" direction="pas"/>
  <pin name="13" x="-12.7" y="-22.86" length="middle" direction="pas"/>
  <pin name="14" x="-12.7" y="-15.24" length="middle" direction="pas"/>
  <pin name="SHIELD" x="-12.7" y="-27.94" length="middle" direction="pas"/>
  <pin name="SHIELD@2" x="-12.7" y="-27.94" length="middle" direction="pas"/>
  <pin name="P1" x="-12.7" y="25.4" length="middle" direction="pas"/>
  <pin name="MDI0+" x="-12.7" y="22.86" length="middle" direction="pas"/>
  <pin name="MDI0-" x="-12.7" y="20.32" length="middle" direction="pas"/>
  <pin name="MDI1+" x="-12.7" y="17.78" length="middle" direction="pas"/>
  <pin name="MDI2+" x="-12.7" y="15.24" length="middle" direction="pas"/>
  <pin name="MDI2-" x="-12.7" y="12.7" length="middle" direction="pas"/>
  <pin name="MDI1-" x="-12.7" y="10.16" length="middle" direction="pas"/>
  <pin name="MDI3+" x="-12.7" y="7.62" length="middle" direction="pas"/>
  <pin name="MDI3-" x="-12.7" y="5.08" length="middle" direction="pas"/>
  <pin name="P10" x="-12.7" y="2.54" length="middle" direction="pas"/>
  <text x="0.7620" y="-5.3340" size="0.762" layer="94" font="vector" ratio="15" align="center-left">GREEN</text>
  <text x="0.7620" y="-18.0340" size="0.762" layer="94" font="vector" ratio="15" align="center-left">YELLOW</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="HR911130A" prefix="J">
  <description>0℃~+70℃ 1 Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With Cross Pin With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHS</description>
  <gates>
    <gate name="G$1" symbol="HR911130A" x="0" y="0"/>
  </gates>
  <devices>
    <device name="" package="HR911130A">
      <connects>
        <connect gate="G$1" pin="11" pad="11"/>
        <connect gate="G$1" pin="12" pad="12"/>
        <connect gate="G$1" pin="13" pad="13"/>
        <connect gate="G$1" pin="14" pad="14"/>
        <connect gate="G$1" pin="SHIELD" pad="S1"/>
        <connect gate="G$1" pin="SHIELD@2" pad="S2"/>
        <connect gate="G$1" pin="P1" pad="1"/>
        <connect gate="G$1" pin="MDI0+" pad="2"/>
        <connect gate="G$1" pin="MDI0-" pad="3"/>
        <connect gate="G$1" pin="MDI1+" pad="4"/>
        <connect gate="G$1" pin="MDI2+" pad="5"/>
        <connect gate="G$1" pin="MDI2-" pad="6"/>
        <connect gate="G$1" pin="MDI1-" pad="7"/>
        <connect gate="G$1" pin="MDI3+" pad="8"/>
        <connect gate="G$1" pin="MDI3-" pad="9"/>
        <connect gate="G$1" pin="P10" pad="10"/>
      </connects>
      <technologies>
        <technology name="">
          <attribute name="MPN" value="HR911130A" constant="no"/>
          <attribute name="MANUFACTURER" value="HANRUN(Zhongshan HanRun Elec)" constant="no"/>
          <attribute name="DATASHEET" value="https://hrdzcn.oss-cn-beijing.aliyuncs.com/202601/ab534667d942f65.pdf" constant="no"/>
          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/hr911130a" constant="no"/>
          <attribute name="LCSC_PN" value="C54408" constant="no"/>
        </technology>
      </technologies>
    </device>
  </devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>