component

HR911130A

Public Made by Adom

by adom

HANRUN(Zhongshan HanRun Elec) Modular/Ethernet Connector (RJ45) Jacks With Magnetics, Through Hole. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectorshr911130aboard-derived

Verified HR911130A

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against HanRun's HR911130A datasheet (Rev. B)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the JLCPCB copy with HanRun's own PDF, linked from the HR911130A product page on hanrun.com (https://www.hanrun.com/rj45_1000/203.html) and served from HanRun's file store; 4 pages, Rev. B (no date printed; PDF created 2020-02-28), retrieved 2026-10-27
  • •Datasheet text layer: HanRun's PDF draws the schematic and drawing labels as vector outlines, so the attached copy is the same 4 pages with an OCR text layer added (ocrmypdf 15.2 / tesseract 5.3) for the pin-name text check; the unmodified HanRun file has sha256 d3a5d7212145ea71b6f643d90478eac1cdb08ef26a191cac525d4ab7fb344ac1
  • ✓All 14 numbered pins match the schematic (p.1) by number and name: P1, MDI 0+ P2, MDI 0- P3, MDI 1+ P4, MDI 2+ P5, MDI 2- P6, MDI 1- P7, MDI 3+ P8, MDI 3- P9, P10, LED pins 11-14; the page keeps MDI0+ etc. without the space the drawing prints between MDI and the pair number, with ASCII hyphens for the drawing's minus signs. No pin renamed
  • ✓LED polarity from the schematic (p.1): green 11 anode -> 12 cathode, yellow 14 anode -> 13 cathode; green is the left LED and yellow the right LED seen from the front (p.2); 568/585 nm, VF 1.8/2.8 V, 20 mA (p.2)
  • ✓All 16 descriptions rewritten from the datasheet. The old ones had wrong cable-side routing for pins 5, 6 and 7 (the schematic routes MDI 2+ to J4 C+, MDI 2- to J5 C-, MDI 1- to J6 B-) and described P1 as the termination return (P1 is the chip-side centre-tap common; P10 is the 4 x 75 ohm / 1000 pF 2 kV termination return)
  • •Shield pins S1/S2 are unnamed in the drawing (two 1.63 mm holes on the layout, p.3); the page keeps the name SHIELD
  • ✓Footprint vs the recommended PCB layout (p.3, component side view): signal pins 1-10 on 0.89 mm drills at 1.27 mm stagger (2.54 mm within a row), rows 6.35 and 8.89 mm behind the post line, pin 1 at the right end of the rear row; footprint pads at x = +/-5.72, 4.44, 3.18, 1.90, 0.64 vs the drawing's 0.635-mm grid (5.715, 4.445, ...), within 0.005 mm; LED pins on 1.02 mm drills at 13.25 mm outer / 2.54 mm pairs, 4.90 mm in front of the post line; 3.25 mm NPTH posts 11.43 mm apart; 1.63 mm shield holes 15.49 mm apart, 3.05 mm behind the post line. Pin 1 position and LED order (14, 13 ... 12, 11 left to right) match
  • ✓3D body vs the mechanical drawing (p.2, tolerance +/-0.25): 16.04 x 21.30 x 13.50 mm against B 16.00, A 21.20, C 13.30; front face 10.92 mm and rear 10.38 mm from the post line against 10.80 / 10.40 (p.3); Z-up, seated on z = 0, the model's 18 pins sit on the footprint's 18 holes
  • •3D pin tails reach 3.05 mm below the seating plane against D 3.50 +/-0.30 mm (p.2): 0.15 mm shorter than the minimum; body and footprint unaffected
  • •DigiKey and Mouser do not carry HR911130A (searched 2026-10-27); LCSC C54408 kept
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (HanRun, Rev. B)product page (hanrun.com)
Verified files✓ hr911130a.kicad_sym✓ hr911130a.kicad_mod✓ hr911130a.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓16 of 16 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! hr911130a.kicad_sym! hr911130a.kicad_mod✓ hr911130a.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
hr911130a / hr911130a.kicad_mod
HistoryDownload
Caleb Publish 0.1.2 8bea343 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398
(footprint "HR911130A"
	(layer "F.Cu")
	(property "Reference" "REF**"
		(at -4.875 -12.466 180)
		(layer F.SilkS)
		(hide yes)
		(uuid "cee7d021-282b-4e27-8eb1-74bfc2dabc7f")
		(effects
			(font (size 1 1) (thickness 0.15))
			(justify)
		)
	)
	(property "Value" "HR911130A"
		(at 2.11 12.247 180)
		(layer F.Fab)
		(hide yes)
		(uuid "7a7356f4-e6f9-410d-96ff-b6db82bf68d7")
		(effects
			(font (size 1 1) (thickness 0.15))
			(justify)
		)
	)
	(property "Datasheet" "https://hrdzcn.oss-cn-beijing.aliyuncs.com/202601/ab534667d942f65.pdf"
		(at 0 0 180)
		(layer F.Fab)
		(hide yes)
		(uuid "691e5682-8911-4b6e-9000-0d7a90fbb8c4")
		(effects
			(font (size 1.27 1.27) (thickness 0.15))
			(justify)
		)
	)
	(property "Description" "100/1000Base-T Single Port RJ45 with Integrated Magnetics and LED"
		(at 0 0 180)
		(layer F.Fab)
		(hide yes)
		(uuid "098a25b9-8e86-4b61-8db0-ec28b35fef24")
		(effects
			(font (size 1.27 1.27) (thickness 0.15))
			(justify)
		)
	)
	(property "MAXIMUM_PACKAGE_HEIGHT" "13.75 mm"
		(at 0 0 180)
		(unlocked yes)
		(layer F.Fab)
		(hide yes)
		(uuid "55e497e7-4d15-4102-9a08-f3c66a857bdf")
		(effects
			(font (size 1 1) (thickness 0.15))
			(justify)
		)
	)
	(property "MFR" "HANRUN(Zhongshan HanRun Elec)"
		(at 0 0 180)
		(unlocked yes)
		(layer F.Fab)
		(hide yes)
		(uuid "2ac9e66e-4338-485b-9c29-65a797b25297")
		(effects
			(font (size 1 1) (thickness 0.15))
			(justify)
		)
	)
	(property "PN" "HR911130A"
		(at 0 0 180)
		(unlocked yes)
		(layer F.Fab)
		(hide yes)
		(uuid "53cf27af-c13c-45a2-9b16-80a679cd4a71")
		(effects
			(font (size 1 1) (thickness 0.15))
			(justify)
		)
	)
	(property "LCSC" "C54408"
		(at 0 0 180)
		(unlocked yes)
		(layer F.Fab)
		(hide yes)
		(uuid "50b53119-2276-4c16-a73a-8b36a0c8b40f")
		(effects
			(font (size 1 1) (thickness 0.15))
			(justify)
		)
	)
	(units
		(unit (name "A") (pins "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "14" "13" "S1" "S2"))
	)
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start 8.05 1.25)
		(end 8.05 -10.92)
		(stroke (width 0.127) (type solid))
		(layer F.SilkS)
		(uuid "29d2f59e-2073-4545-94cf-6edb2440313b")
	)
	(fp_line
		(start 8.05 10.38)
		(end 8.05 5)
		(stroke (width 0.127) (type solid))
		(layer F.SilkS)
		(uuid "ba6915c7-fa77-48bd-bf3a-f11ee80f79c6")
	)
	(fp_line
		(start -8.05 1.25)
		(end -8.05 -10.92)
		(stroke (width 0.127) (type solid))
		(layer F.SilkS)
		(uuid "169f82fe-9899-472b-bf2d-7aca6d7e6a65")
	)
	(fp_line
		(start -8.05 10.38)
		(end 8.05 10.38)
		(stroke (width 0.127) (type solid))
		(layer F.SilkS)
		(uuid "125a7c41-17f1-4061-997e-385430059f9e")
	)
	(fp_line
		(start -8.05 10.38)
		(end -8.05 5)
		(stroke (width 0.127) (type solid))
		(layer F.SilkS)
		(uuid "539a2b4d-6df3-4597-9045-dfb361a2ed7a")
	)
	(fp_circle
		(center 8.607 9.017)
		(end 8.707 9.017)
		(stroke (width 0.2) (type solid))
		(fill no)
		(layer F.SilkS)
		(uuid "63370f04-b94f-4bb1-9c14-735e106b4e0b")
	)
	(fp_line
		(start 9.2775 -11.17)
		(end 9.2775 10.63)
		(stroke (width 0.05) (type solid))
		(layer F.CrtYd)
		(uuid "8590c821-17d3-4776-9510-7728877c68ef")
	)
	(fp_line
		(start 9.2775 10.63)
		(end -9.2775 10.63)
		(stroke (width 0.05) (type solid))
		(layer F.CrtYd)
		(uuid "a57bacb7-cbc6-4881-b328-012c15205f43")
	)
	(fp_line
		(start -9.2775 -11.17)
		(end 9.2775 -11.17)
		(stroke (width 0.05) (type solid))
		(layer F.CrtYd)
		(uuid "35a38aaf-b37d-4a6f-bf5f-b7c699ca6da3")
	)
	(fp_line
		(start -9.2775 10.63)
		(end -9.2775 -11.17)
		(stroke (width 0.05) (type solid))
		(layer F.CrtYd)
		(uuid "d887336a-3cae-4da1-9a31-ad010321b0e1")
	)
	(fp_line
		(start 8.05 -10.92)
		(end -8.05 -10.92)
		(stroke (width 0.127) (type solid))
		(layer F.Fab)
		(uuid "f24cbda9-1086-4be5-8dbd-8c2337625b59")
	)
	(fp_line
		(start 8.05 10.38)
		(end 8.05 -10.92)
		(stroke (width 0.127) (type solid))
		(layer F.Fab)
		(uuid "3cc5b0cc-3516-4381-960f-b47146f5fff1")
	)
	(fp_line
		(start -8.05 -10.92)
		(end -8.05 10.38)
		(stroke (width 0.127) (type solid))
		(layer F.Fab)
		(uuid "d6a8cb0a-d111-45d0-b5d1-fecb768a9b34")
	)
	(fp_line
		(start -8.05 10.38)
		(end 8.05 10.38)
		(stroke (width 0.127) (type solid))
		(layer F.Fab)
		(uuid "f337330a-4333-47b0-8405-068aea5541ea")
	)
	(fp_circle
		(center 8.607 9.017)
		(end 8.707 9.017)
		(stroke (width 0.2) (type solid))
		(fill no)
		(layer F.Fab)
		(uuid "0f2c3e4e-f153-4bac-9e6f-e86117470b93")
	)
	(fp_line
		(start 8.05 -10.92)
		(end -8.05 -10.92)
		(stroke (width 0.127) (type solid))
		(layer "User.4")
		(uuid "0b64894e-d9b0-4bbc-83c1-efbc6285fbbd")
	)
	(pad "" np_thru_hole circle
		(at -5.715 0)
		(size 3.25 3.25)
		(drill 3.25)
		(layers "*.Cu" "*.Mask")
		(clearance 0.5)
	)
	(pad "" np_thru_hole circle
		(at 5.715 0)
		(size 3.25 3.25)
		(drill 3.25)
		(layers "*.Cu" "*.Mask")
		(clearance 0.5)
	)
	(pad "1" thru_hole rect
		(at 5.72 8.89)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "2" thru_hole circle
		(at 4.44 6.35)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "3" thru_hole circle
		(at 3.18 8.89)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "4" thru_hole circle
		(at 1.9 6.35)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "5" thru_hole circle
		(at 0.64 8.89)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "6" thru_hole circle
		(at -0.64 6.35)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "7" thru_hole circle
		(at -1.9 8.89)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "8" thru_hole circle
		(at -3.18 6.35)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "9" thru_hole circle
		(at -4.44 8.89)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "10" thru_hole circle
		(at -5.72 6.35)
		(size 1.398 1.398)
		(drill 0.89)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "11" thru_hole circle
		(at 6.625 -4.9)
		(size 1.53 1.53)
		(drill 1.02)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "12" thru_hole circle
		(at 4.085 -4.9)
		(size 1.53 1.53)
		(drill 1.02)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "13" thru_hole circle
		(at -4.085 -4.9)
		(size 1.53 1.53)
		(drill 1.02)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "14" thru_hole circle
		(at -6.625 -4.9)
		(size 1.53 1.53)
		(drill 1.02)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges no)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "S1" thru_hole circle
		(at 7.745 3.05)
		(size 2.445 2.445)
		(drill 1.63)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(pad "S2" thru_hole circle
		(at -7.745 3.05)
		(size 2.445 2.445)
		(drill 1.63)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
		(solder_mask_margin 0.102)
	)
	(embedded_fonts no)
	(model "${KIPRJMOD}/hr911130a.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)