component

HR911130A

Public Made by Adom

by adom

HANRUN(Zhongshan HanRun Elec) Modular/Ethernet Connector (RJ45) Jacks With Magnetics, Through Hole. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectorshr911130aboard-derived

Verified HR911130A

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against HanRun's HR911130A datasheet (Rev. B)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the JLCPCB copy with HanRun's own PDF, linked from the HR911130A product page on hanrun.com (https://www.hanrun.com/rj45_1000/203.html) and served from HanRun's file store; 4 pages, Rev. B (no date printed; PDF created 2020-02-28), retrieved 2026-10-27
  • •Datasheet text layer: HanRun's PDF draws the schematic and drawing labels as vector outlines, so the attached copy is the same 4 pages with an OCR text layer added (ocrmypdf 15.2 / tesseract 5.3) for the pin-name text check; the unmodified HanRun file has sha256 d3a5d7212145ea71b6f643d90478eac1cdb08ef26a191cac525d4ab7fb344ac1
  • ✓All 14 numbered pins match the schematic (p.1) by number and name: P1, MDI 0+ P2, MDI 0- P3, MDI 1+ P4, MDI 2+ P5, MDI 2- P6, MDI 1- P7, MDI 3+ P8, MDI 3- P9, P10, LED pins 11-14; the page keeps MDI0+ etc. without the space the drawing prints between MDI and the pair number, with ASCII hyphens for the drawing's minus signs. No pin renamed
  • ✓LED polarity from the schematic (p.1): green 11 anode -> 12 cathode, yellow 14 anode -> 13 cathode; green is the left LED and yellow the right LED seen from the front (p.2); 568/585 nm, VF 1.8/2.8 V, 20 mA (p.2)
  • ✓All 16 descriptions rewritten from the datasheet. The old ones had wrong cable-side routing for pins 5, 6 and 7 (the schematic routes MDI 2+ to J4 C+, MDI 2- to J5 C-, MDI 1- to J6 B-) and described P1 as the termination return (P1 is the chip-side centre-tap common; P10 is the 4 x 75 ohm / 1000 pF 2 kV termination return)
  • •Shield pins S1/S2 are unnamed in the drawing (two 1.63 mm holes on the layout, p.3); the page keeps the name SHIELD
  • ✓Footprint vs the recommended PCB layout (p.3, component side view): signal pins 1-10 on 0.89 mm drills at 1.27 mm stagger (2.54 mm within a row), rows 6.35 and 8.89 mm behind the post line, pin 1 at the right end of the rear row; footprint pads at x = +/-5.72, 4.44, 3.18, 1.90, 0.64 vs the drawing's 0.635-mm grid (5.715, 4.445, ...), within 0.005 mm; LED pins on 1.02 mm drills at 13.25 mm outer / 2.54 mm pairs, 4.90 mm in front of the post line; 3.25 mm NPTH posts 11.43 mm apart; 1.63 mm shield holes 15.49 mm apart, 3.05 mm behind the post line. Pin 1 position and LED order (14, 13 ... 12, 11 left to right) match
  • ✓3D body vs the mechanical drawing (p.2, tolerance +/-0.25): 16.04 x 21.30 x 13.50 mm against B 16.00, A 21.20, C 13.30; front face 10.92 mm and rear 10.38 mm from the post line against 10.80 / 10.40 (p.3); Z-up, seated on z = 0, the model's 18 pins sit on the footprint's 18 holes
  • •3D pin tails reach 3.05 mm below the seating plane against D 3.50 +/-0.30 mm (p.2): 0.15 mm shorter than the minimum; body and footprint unaffected
  • •DigiKey and Mouser do not carry HR911130A (searched 2026-10-27); LCSC C54408 kept
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (HanRun, Rev. B)product page (hanrun.com)
Verified files✓ hr911130a.kicad_sym✓ hr911130a.kicad_mod✓ hr911130a.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓16 of 16 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! hr911130a.kicad_sym! hr911130a.kicad_mod✓ hr911130a.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
hr911130a / hr911130a-hero.overlay.json
HistoryDownload
Caleb Publish 0.1.2 8bea343 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441
{
  "spec": "adom-hero 1.4",
  "mpn": "HR911130A",
  "kind": "component + footprint reference art",
  "board_use": false,
  "plane_z_mm": -0.02,
  "units": "metre",
  "upAxis": "Z",
  "layers": {
    "pad_outlines": {
      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",
      "rgba": [
        0.0,
        0.902,
        0.863,
        0.5
      ],
      "pads": 16,
      "span_mm": 17.935,
      "dash_mm": 0.4484,
      "gap_mm": 0.269,
      "pad_stroke_mm": 0.09
    },
    "silkscreen": {
      "material": "Silkscreen reference lines - 30 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.3
      ],
      "footprint_items": 6,
      "pin1": {
        "source": "added dot (AI)",
        "pad": "1",
        "center_mm": [
          6.927,
          8.89
        ],
        "r_mm": 0.308
      }
    },
    "signal_names": {
      "material": "Signal names - 50 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.5
      ],
      "font": "DejaVu Sans Mono",
      "labels": 16,
      "sides": "top + mirrored underside (single-sided)",
      "fallback_to_pad_number": 4
    }
  },
  "align": {
    "ok": true,
    "centre_offset_mm": 0.008,
    "tolerance_mm": 1.435,
    "orientation_flipped": false,
    "contacts_bbox_mm": [
      -7.895,
      7.895,
      -9.09,
      5.15
    ],
    "pads_bbox_mm": [
      -8.968,
      8.968,
      -9.589,
      5.665
    ],
    "seating_z_mm": -3.051
  },
  "sources": {
    "glb": "hr911130a.glb",
    "glb_sha256": "98a52eb5270de72d334c85dffc5bdd1f45c4f6311f6058536dbaa2e15dbfed70",
    "footprint": "hr911130a.kicad_mod",
    "footprint_sha256": "ed4f2caec5dd81da098944d1cd9ef61f645dc97356ad4aed93998d58d393dedb",
    "pins": "page.json component.pins",
    "pins_sha256": "674c3c3037952e7545b31647cc373a9d534232671fa4c01546ab30547c657391"
  },
  "generator": "adom-wiki 1.8.0 (component_hero)",
  "labels": [
    {
      "pad": "1",
      "text": "P1",
      "x": 5.72,
      "y": 9.739,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "2",
      "text": "MDI0+",
      "x": 4.44,
      "y": 7.199,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "3",
      "text": "MDI0-",
      "x": 3.18,
      "y": 9.739,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "4",
      "text": "MDI1+",
      "x": 1.9,
      "y": 7.199,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "5",
      "text": "MDI2+",
      "x": 0.64,
      "y": 9.739,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "6",
      "text": "MDI2-",
      "x": -0.64,
      "y": 7.199,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "7",
      "text": "MDI1-",
      "x": -1.9,
      "y": 9.739,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "8",
      "text": "MDI3+",
      "x": -3.18,
      "y": 7.199,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "9",
      "text": "MDI3-",
      "x": -4.44,
      "y": 9.739,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "10",
      "text": "P10",
      "x": -6.569,
      "y": 6.35,
      "align": "right",
      "vertical": false,
      "h": 0.6
    },
    {
      "pad": "11",
      "text": "11",
      "x": 6.625,
      "y": -5.815,
      "align": "left",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "12",
      "text": "12",
      "x": 4.085,
      "y": -5.815,
      "align": "left",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "13",
      "text": "13",
      "x": -4.085,
      "y": -5.815,
      "align": "left",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "14",
      "text": "14",
      "x": -6.625,
      "y": -5.815,
      "align": "left",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "S1",
      "text": "SHIELD",
      "x": 9.118,
      "y": 3.05,
      "align": "left",
      "vertical": false,
      "h": 0.6
    },
    {
      "pad": "S2",
      "text": "SHIELD",
      "x": -9.118,
      "y": 3.05,
      "align": "right",
      "vertical": false,
      "h": 0.6
    }
  ],
  "pads": [
    {
      "number": "1",
      "shape": "rect",
      "center_mm": [
        5.72,
        8.89
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "2",
      "shape": "circle",
      "center_mm": [
        4.44,
        6.35
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "3",
      "shape": "circle",
      "center_mm": [
        3.18,
        8.89
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "4",
      "shape": "circle",
      "center_mm": [
        1.9,
        6.35
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "5",
      "shape": "circle",
      "center_mm": [
        0.64,
        8.89
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "6",
      "shape": "circle",
      "center_mm": [
        -0.64,
        6.35
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "7",
      "shape": "circle",
      "center_mm": [
        -1.9,
        8.89
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "8",
      "shape": "circle",
      "center_mm": [
        -3.18,
        6.35
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "9",
      "shape": "circle",
      "center_mm": [
        -4.44,
        8.89
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "10",
      "shape": "circle",
      "center_mm": [
        -5.72,
        6.35
      ],
      "size_mm": [
        1.398,
        1.398
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "circle",
      "center_mm": [
        6.625,
        -4.9
      ],
      "size_mm": [
        1.53,
        1.53
      ],
      "rot": 0.0
    },
    {
      "number": "12",
      "shape": "circle",
      "center_mm": [
        4.085,
        -4.9
      ],
      "size_mm": [
        1.53,
        1.53
      ],
      "rot": 0.0
    },
    {
      "number": "13",
      "shape": "circle",
      "center_mm": [
        -4.085,
        -4.9
      ],
      "size_mm": [
        1.53,
        1.53
      ],
      "rot": 0.0
    },
    {
      "number": "14",
      "shape": "circle",
      "center_mm": [
        -6.625,
        -4.9
      ],
      "size_mm": [
        1.53,
        1.53
      ],
      "rot": 0.0
    },
    {
      "number": "S1",
      "shape": "circle",
      "center_mm": [
        7.745,
        3.05
      ],
      "size_mm": [
        2.445,
        2.445
      ],
      "rot": 0.0
    },
    {
      "number": "S2",
      "shape": "circle",
      "center_mm": [
        -7.745,
        3.05
      ],
      "size_mm": [
        2.445,
        2.445
      ],
      "rot": 0.0
    }
  ]
}