main
Ray
hr8825: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
e9b52b2
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323
{
"schema_version": 1,
"type": "component",
"slug": "hr8825",
"title": "HR8825",
"brief": "Jiaxing Heroic Elec Tech Stepper Motor Driver, HTSSOP-28-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"motor driver ics",
"hr8825"
],
"component": {
"mpn": "HR8825",
"manufacturer": "Jiaxing Heroic Elec Tech",
"package": "HTSSOP-28-EP",
"pin_count": 29,
"category": "Motor Driver ICs",
"subcategory": "Stepper Motor Driver",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756930561422442496",
"parts": {
"symbol": "hr8825.kicad_sym",
"footprint": "hr8825.kicad_mod",
"model_3d": "hr8825-etched.glb",
"model_3d_plain": "hr8825.glb",
"model_3d_step": "hr8825-etched.step",
"model_3d_step_plain": "hr8825.step",
"lbr": "hr8825.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "CP1",
"type": "passive",
"description": "Charge pump flying capacitor terminal 1. Connect a 0.1uF capacitor between CP1 and CP2 to build the high-side gate drive charge pump."
},
{
"number": "2",
"name": "CP2",
"type": "passive",
"description": "Charge pump flying capacitor terminal 2. Pairs with CP1 via a 0.1uF capacitor for internal charge pump generation."
},
{
"number": "3",
"name": "VCP",
"type": "power_out",
"description": "Charge pump reservoir / high-side gate drive supply. Connect a 0.1uF capacitor from VCP to VM."
},
{
"number": "4",
"name": "VMA",
"type": "power_in",
"description": "A-bridge motor supply, 8V to 32V. All VM pins must be tied together and bypassed to GND (≥100uF bulk plus 0.1uF ceramic close to pin)."
},
{
"number": "5",
"name": "AOUT1",
"type": "output",
"description": "A-bridge H-bridge output 1. Connects to one terminal of the stepper motor A-phase coil. Rated ±2.5A (positive current is defined as AOUT1 → AOUT2)."
},
{
"number": "6",
"name": "ISENA",
"type": "passive",
"description": "A-bridge current-sense return. Connect the A-bridge sense resistor Rs from ISENA to GND; VTRIP is regulated to VAVREF/5."
},
{
"number": "7",
"name": "AOUT2",
"type": "output",
"description": "A-bridge H-bridge output 2. Connects to the other terminal of the stepper motor A-phase coil."
},
{
"number": "8",
"name": "BOUT2",
"type": "output",
"description": "B-bridge H-bridge output 2. Connects to one terminal of the stepper motor B-phase coil. Positive current direction is BOUT1 → BOUT2."
},
{
"number": "9",
"name": "ISENB",
"type": "passive",
"description": "B-bridge current-sense return. Connect the B-bridge sense resistor Rs from ISENB to GND."
},
{
"number": "10",
"name": "BOUT1",
"type": "output",
"description": "B-bridge H-bridge output 1. Connects to the other terminal of the stepper motor B-phase coil."
},
{
"number": "11",
"name": "VMB",
"type": "power_in",
"description": "B-bridge motor supply, 8V to 32V. Must be tied to VMA - all VM pins connect to the same supply."
},
{
"number": "12",
"name": "AVREF",
"type": "input",
"description": "A-bridge current-set reference input, 1V to 3.5V (VREF absolute max -0.3 to 4V). Chopping current ICHOP = VAVREF / (5·Rs). Typically tied to BVREF and to V3P3OUT via a divider with 0.1uF bypass."
},
{
"number": "13",
"name": "BVREF",
"type": "input",
"description": "B-bridge current-set reference input, 1V to 3.5V. Usually tied to AVREF so both bridges share the same reference."
},
{
"number": "14",
"name": "GND",
"type": "power_in",
"description": "Device ground. All GND pins and the exposed thermal pad must be tied to the PCB ground plane."
},
{
"number": "15",
"name": "V3P3OUT",
"type": "power_out",
"description": "Internal 3.3V LDO output (3.1V min / 3.5V max, up to 1mA load). Bypass with 0.1uF to GND; may be used to bias VREF and pull-ups."
},
{
"number": "16",
"name": "nRESET",
"type": "input",
"description": "Active-low reset input. Low resets internal logic and sets the microstep indexer to HOME while disabling H-bridges; STEP inputs are ignored. Internal 100kΩ pull-down."
},
{
"number": "17",
"name": "nSLEEP",
"type": "input",
"description": "Active-low sleep input. Low enters low-power sleep (H-bridges, charge pump and V3P3OUT disabled). On rising edge wait tWAKE ≈ 1ms before applying STEP. Internal 100kΩ pull-down."
},
{
"number": "18",
"name": "nFAULT",
"type": "output",
"description": "Open-drain fault output. Pulled low on overcurrent (OCP) or thermal shutdown (TSD). Requires external pull-up (e.g. 10kΩ to V3P3OUT). VOL = 0.35V typ at 5mA."
},
{
"number": "19",
"name": "DECAY",
"type": "input",
"description": "Decay-mode select. Tied low = slow-rise mixed-decay fall (~25us); left floating or high = full mixed decay. External pull-down resistor (22k-100k) trims decay time. Internal 22kΩ pull-down."
},
{
"number": "20",
"name": "DIR",
"type": "input",
"description": "Direction control input. Sets the direction advanced by the internal microstep indexer on each STEP rising edge. Internal 100kΩ pull-down."
},
{
"number": "21",
"name": "nENBL",
"type": "input",
"description": "Active-low output enable. Low enables the H-bridge outputs; high tri-states the outputs while the indexer continues to track STEP. Internal 100kΩ pull-down."
},
{
"number": "22",
"name": "STEP",
"type": "input",
"description": "Step clock input. Rising edge advances the microstep indexer by one step. fSTEP up to 250kHz; tWH/tWL ≥ 1.9us. Internal 100kΩ pull-down."
},
{
"number": "23",
"name": "NC",
"type": "unconnected",
"description": "No connect. Leave floating (no defined function)."
},
{
"number": "24",
"name": "MODE0",
"type": "input",
"description": "Microstep resolution select bit 0. MODE[2:0] selects full/1/2/1/4/1/8/1/16/1/32-step operation per Table 1. Internal 100kΩ pull-down."
},
{
"number": "25",
"name": "MODE1",
"type": "input",
"description": "Microstep resolution select bit 1. See MODE0. Internal 100kΩ pull-down."
},
{
"number": "26",
"name": "MODE2",
"type": "input",
"description": "Microstep resolution select bit 2 (MSB). See MODE0. Internal 100kΩ pull-down."
},
{
"number": "27",
"name": "nHOME",
"type": "output",
"description": "Open-drain HOME status output. Asserted low when the internal microstep indexer is at HOME position. Requires external pull-up."
},
{
"number": "28",
"name": "GND",
"type": "power_in",
"description": "Device ground (second GND pin). Must be tied together with pin 14 GND and the exposed thermal pad (PPAD)."
},
{
"number": "PPAD",
"name": "GND",
"type": "power_in",
"description": "Exposed thermal pad on the underside of the ETSSOP-28 package. Must be soldered to the ground plane for both electrical and thermal performance."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756930561422442496",
"pages": 19,
"sha256": "91d3f5799f038978",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "hr8825.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
9.7,
1.2
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b9e231ffd0dc17d13a174b875c5ed26e9f28ef12dd003623bb416f5f955fe0a6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hr8825-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
9.7,
1.2
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "af0050c8981e6b3873d729a5f9108c8d602eb9cb87e7d2b400896fb3966df74d",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Jiaxing Heroic Elec Tech",
"Package": "HTSSOP-28-EP",
"Category": "Motor Driver ICs",
"Pins": "29"
}
},
"variants": [
{
"mpn": "HR8825MTER",
"kind": "packaging"
},
{
"mpn": "HR8825MTERA",
"kind": "packaging"
}
],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"hr8825"
],
"discovery_pitch": "HR8825 (Jiaxing Heroic Elec Tech) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hr8825.kicad_sym",
"hr8825.kicad_mod",
"hr8825.glb",
"hr8825.step",
"hr8825.lbr",
"docs/hero.png",
"docs/hr8825-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T21:58:40.421Z"
}