component
HoYLR2512-3W-12mR-1%
Public Made by Adomby adom
Milliohm Current Sense Resistors / Shunt Resistors, 2512. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHoYLR2512-3W-12mR-1%
Milliohm · Current Sense Resistors / Shunt Resistors · 2512
HoYLR2512-3W-12mR-1% from Milliohm, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Milliohm |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance | -1 | 1 | % | Part number tolerance code 1% (printed ±1%) | 3 | ||
| Temperature coefficient (TCR) | -50 | 50 | ppm/℃ | Printed ±50ppm/℃ | 3 | ||
| Rated power | 3 | W | Printed 额定功率 3W | 3 | |||
| Maximum rated current | 15.81 | A | Printed 最大额定电流 15.81A | 3 | |||
| Operating temperature range | -55 | 170 | ℃ | 工作温度范围 -55℃~+170℃ | 3 | ||
| Pre-heat zone temperature | 150 | 180 | ℃ | Pre-heat zone, 90±30 s | 4 | ||
| Soldering zone temperature | 230 | ℃ | Soldering zone, ≥230℃, 30±10 s | 4 | |||
| Insulation resistance | 100 | MΩ | 100V±15V DC applied for 60s between electrode and substrate | 5 | |||
| Solderability (electrode solder coverage) | 95 | % | 245℃±5℃ solder bath, 2s±0.5s; printed 电极上锡面积>95% | 5 | |||
| ΔR temperature coefficient test, ΔR≤±(1%+0.05mΩ) | -1 | 1 | % | +25℃~+125℃; plus 0.05mΩ term as printed | 5 | ||
| ΔR heat resistance, ΔR≤±(0.5%+0.05mΩ) | -0.5 | 0.5 | % | 270℃±5℃ solder bath, 10s±1; no visible damage; plus 0.05mΩ term as printed | 5 | ||
| ΔR bending test, ΔR≤±(0.5%+0.05mΩ) | -0.5 | 0.5 | % | Bend distance 2mm, hold 60s±5s; no mechanical damage; plus 0.05mΩ term as printed | 5 | ||
| ΔR long-term high temperature, ΔR≤±(1.0%+0.05mΩ) | -1 | 1 | % | 170℃ for 1000H; plus 0.05mΩ term as printed | 5 | ||
| ΔR long-term low temperature, ΔR≤±(0.5%+0.05mΩ) | -0.5 | 0.5 | % | -55℃ for 1000H; plus 0.05mΩ term as printed | 5 | ||
| ΔR temperature cycling, ΔR≤±(0.5%+0.05mΩ) | -0.5 | 0.5 | % | -55℃ 30min ~ room temp 5min ~155℃ 30min, 1000 cycles; plus 0.05mΩ term as printed | 5 | ||
| ΔR long-term endurance, ΔR≤±(1.0%+0.05mΩ) | -1 | 1 | % | 70℃±2℃, 1000 hours, rated power, on 1.5h/off 0.5h; plus 0.05mΩ term as printed | 5 | ||
| ΔR long-term humidity, ΔR≤±(1.0%+0.05mΩ) | -1 | 1 | % | 85℃±2℃, 85%±3%RH, 1000 hours, rated power, on 1.5h/off 0.5h; plus 0.05mΩ term as printed | 5 | ||
| Nominal resistance | 12 | mΩ | Printed 阻值 12mR (12 mΩ) | 3 |
CAD (KiCad official)
- Symbol:
HoYLR2512-3W-12mR-1% - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
hoylr2512-3w-12mr-1-etched.step/hoylr2512-3w-12mr-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hoylr2512-3w-12mr-1.step/hoylr2512-3w-12mr-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Milliohm datasheet (7 pp, sha256
8392e40aa755f1c7, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).