component
HoLR2512-330mR-1%
Public Made by Adomby adom
Milliohm Current Sense Resistors / Shunt Resistors, 2512. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHoLR2512-330mR-1%
Milliohm · Current Sense Resistors / Shunt Resistors · 2512
HoLR2512-330mR-1% from Milliohm, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First Ni/Sn-plated terminal of the 330 mR alloy resistor (3W rated power, -50 to +170 °C operating range), non-polar and interchangeable with the other terminal. |
| 2 | 2 | passive | Second Ni/Sn-plated terminal of the 330 mR alloy resistor (3W rated power, ±1% tolerance), non-polar and interchangeable with the other terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Milliohm |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code F, printed as ±1%) | -1 | 1 | % | 1 | |||
| Load life: resistance change | -1 | 1 | % | IEC60115-1-4.25.1 / JIS-C5201-4.25.1; 1000 hours at rated power, 70℃, 1.5 hours ON, 0.5 hour OFF | 4 | ||
| Short time overload: resistance change | -1 | 1 | % | IEC60115-1-4.13 / JIS-C5201-4.13; 2 X rated power for 5 s | 4 | ||
| Moisture, no load: resistance change | -1 | 1 | % | IEC60115-1-4.24.2.1a) / JIS-C5201-4.24.2.1a); 85℃, 85%RH, 1000 hrs | 4 | ||
| Temperature cycle: resistance change | -1 | 1 | % | IEC60115-1-4.19 / JIS-C5201-4.19; -55℃ & +155℃, 100 cycles, 15 min per extreme condition | 4 | ||
| Resistance to soldering heat: resistance change | -0.5 | 0.5 | % | IEC60115-1-4.18 / JIS-C5201-4.18; 260±5℃ for 10±1 sec | 4 | ||
| High temperature exposure: resistance change | -1 | 1 | % | IEC60115-1-4.23.2 / JIS-C5201-4.23.2; 155℃, 1000 hrs | 4 | ||
| Low temperature storage: resistance change | -1 | 1 | % | IEC60115-1-4.23.4 / JIS-C5201-4.23.4; -55℃, 1000 hrs | 4 | ||
| Substrate bending: resistance change | -0.5 | 0.5 | % | IEC60115-1-4.33 / JIS-C5201-4.33; bending width 2 mm | 4 | ||
| Insulation resistance | 100 | MΩ | IEC60115-1-4.6 / JIS-C5201-4.6; 100 V DC for 1 minute | 4 | |||
| Operating temperature range | -50 | 170 | ℃ | 2 | |||
| Rated power | 3 | W | 2 |
CAD (KiCad official)
- Symbol:
HoLR2512-330mR-1% - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
holr2512-330mr-1-etched.step/holr2512-330mr-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);holr2512-330mr-1.step/holr2512-330mr-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Milliohm datasheet (4 pp, sha256
6fe015b76b72e315, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).