component
HoLLR2512-3W-80mR-1%
Public Made by Adomby adom
Milliohm Current Sense Resistors / Shunt Resistors, 2512. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
4ed5b30
HoLLR2512-3W-80mR-1%
Milliohm · Current Sense Resistors / Shunt Resistors · 2512
HoLLR2512-3W-80mR-1% from Milliohm, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First resistor terminal (end electrode, C = 0.9±0.2 mm) of the 80 mΩ ±1% element, rated 3 W maximum at up to 70°C, 77.50 A maximum rated current, with the recommended pad A = 4.0±0.1 mm, L = 4.1±0.1 mm, B = 2.1±0.1 mm. |
| 2 | 2 | passive | Second resistor terminal (end electrode) of the 80 mΩ ±1% element, with a Kelvin sensing trace taken from the inner pad edge for resistance measurement, operating from -55 to +170°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Milliohm |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (suffix -1%, F = ±1%) | -1 | 1 | % | Part suffix -1% (code F = ±1%) | 2 | ||
| Temperature coefficient of resistance | TCR | -40 | 40 | ppm/°C | 1mΩ<R≤500mΩ | 3 | |
| Short time overload resistance change | -0.5 | 0.5 | % | 5 s at 2× rated power (3W ×2), then 24 h rest | 6 | ||
| Biased humidity resistance change | -0.5 | 0.5 | % | 85°C ±5°C, 85 ±5%RH, rated current, 90 min ON / 30 min OFF, 1,000 h | 6 | ||
| Temperature cycling resistance change | -0.5 | 0.5 | % | -55°C to +125°C, 1000 cycles | 6 | ||
| Low temperature exposure (storage) resistance change | -0.5 | 0.5 | % | -55±2°C, 1000 h | 6 | ||
| High temperature exposure (storage) resistance change | -1 | 1 | % | 170°C, 1000 h | 7 | ||
| Load life resistance change | -1 | 1 | % | 70±2°C, rated current, 90 min ON / 30 min OFF, 1,000 h | 7 | ||
| Resistance to solder heat resistance change | -0.5 | 0.5 | % | 260±5°C solder bath, 10±1 s | 7 | ||
| Resistance to solvent resistance change | -0.5 | 0.5 | % | Isopropanol 20~25°C, 60±5 s | 7 | ||
| Joint strength of solder resistance change | -0.5 | 0.5 | % | Board bend test, load applied at centre of test board | 7 | ||
| Solderability (electrode new solder coverage) | 95 | % | Dipped at 245±5°C for 3±1 s, magnifier inspection | 7 | |||
| Insulation resistance | 100 | MΩ | 100 VDC applied for 1 min, electrode to protective layer and electrode to substrate | 7 | |||
| Operating temperature range | -55 | 170 | °C | 使用温度范围 (operating temperature range) for 2512 2W/3W | 3 | ||
| Nominal resistance | R | 80 | mΩ | Part number 80mR | 1 | ||
| Rated power | P | 3 | W | Part number 3W; power must be derated above 70°C per derating curve | 3 |
CAD (KiCad official)
- Symbol:
HoLLR2512-3W-80mR-1% - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
hollr2512-3w-80mr-1-etched.step/hollr2512-3w-80mr-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hollr2512-3w-80mr-1.step/hollr2512-3w-80mr-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Milliohm datasheet (9 pp, sha256
675c43dd8835a46f, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HoLLR2512-3W-80mR-1%
**Milliohm** · Current Sense Resistors / Shunt Resistors · 2512
HoLLR2512-3W-80mR-1% from Milliohm, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First resistor terminal (end electrode, C = 0.9±0.2 mm) of the 80 mΩ ±1% element, rated 3 W maximum at up to 70°C, 77.50 A maximum rated current, with the recommended pad A = 4.0±0.1 mm, L = 4.1±0.1 mm, B = 2.1±0.1 mm. |
| 2 | 2 | passive | Second resistor terminal (end electrode) of the 80 mΩ ±1% element, with a Kelvin sensing trace taken from the inner pad edge for resistance measurement, operating from -55 to +170°C. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Milliohm |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (suffix -1%, F = ±1%) | | -1 | | 1 | % | Part suffix -1% (code F = ±1%) | 2 |
| Temperature coefficient of resistance | TCR | -40 | | 40 | ppm/°C | 1mΩ<R≤500mΩ | 3 |
| Short time overload resistance change | | -0.5 | | 0.5 | % | 5 s at 2× rated power (3W ×2), then 24 h rest | 6 |
| Biased humidity resistance change | | -0.5 | | 0.5 | % | 85°C ±5°C, 85 ±5%RH, rated current, 90 min ON / 30 min OFF, 1,000 h | 6 |
| Temperature cycling resistance change | | -0.5 | | 0.5 | % | -55°C to +125°C, 1000 cycles | 6 |
| Low temperature exposure (storage) resistance change | | -0.5 | | 0.5 | % | -55±2°C, 1000 h | 6 |
| High temperature exposure (storage) resistance change | | -1 | | 1 | % | 170°C, 1000 h | 7 |
| Load life resistance change | | -1 | | 1 | % | 70±2°C, rated current, 90 min ON / 30 min OFF, 1,000 h | 7 |
| Resistance to solder heat resistance change | | -0.5 | | 0.5 | % | 260±5°C solder bath, 10±1 s | 7 |
| Resistance to solvent resistance change | | -0.5 | | 0.5 | % | Isopropanol 20~25°C, 60±5 s | 7 |
| Joint strength of solder resistance change | | -0.5 | | 0.5 | % | Board bend test, load applied at centre of test board | 7 |
| Solderability (electrode new solder coverage) | | 95 | | | % | Dipped at 245±5°C for 3±1 s, magnifier inspection | 7 |
| Insulation resistance | | 100 | | | MΩ | 100 VDC applied for 1 min, electrode to protective layer and electrode to substrate | 7 |
| Operating temperature range | | -55 | | 170 | °C | 使用温度范围 (operating temperature range) for 2512 2W/3W | 3 |
| Nominal resistance | R | | 80 | | mΩ | Part number 80mR | 1 |
| Rated power | P | | 3 | | W | Part number 3W; power must be derated above 70°C per derating curve | 3 |
## CAD (KiCad official)
- Symbol: `HoLLR2512-3W-80mR-1%`
- Footprint: `Resistor_SMD:R_2512_6332Metric`
- 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files: `hollr2512-3w-80mr-1-etched.step` / `hollr2512-3w-80mr-1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hollr2512-3w-80mr-1.step` / `hollr2512-3w-80mr-1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Milliohm datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603386056972509184) (9 pp, sha256 `675c43dd8835a46f`, retrieved 2026-11-07, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hollr2512-3w-80mr-1-datasheet.pdf)