component
HMIC5205-3.3YM5
Public Made by Adomby adom
HXY MOSFET Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HMIC5205-3.3YM5
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
HMIC5205-3.3YM5 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, with a rated input voltage range of 3.0V to 22V (absolute maximum -0.3V to +24V). |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | CE | input | ON/OFF enable control input; high level 1.7V to 20V enables the output, low level 0V to 0.3V puts the device into sleep/standby mode. |
| 4 | NC | unconnected | No connect pin with no internal function. |
| 5 | VOUT | power_out | Regulated 3.3V output (±2% accuracy) for this variant, delivering up to 350mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 3 | 22 | V | 3 | ||
| Output Voltage | VOUT | 3 | 5 | V | 3 | ||
| Voltage Accuracy | -2 | 2 | % | IOUT=1mA | 3 | ||
| Output Current | IOUT | 350 | mA | VIN=VOUT+2.0V | 3 | ||
| Load Regulation | △VOUT | 20 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤150mA | 3 | ||
| Line Regulation | △VOUT/VOUT*△VIN | 0.015 | 0.2 | %/V | VOUT+1.0V≤VIN≤22V, IOUT=10mA | 3 | |
| Voltage Drop | VDIF1 | 200 | mV | IOUT=100mA,VOUT=3.3V | 3 | ||
| Quiescent Current | ISS | 2 | 4 | μA | VCE=VIN | 3 | |
| Standby Current | ISTANDBY | 0.1 | μA | VCE=VSS | 3 | ||
| CE High Voltage | CEH | 1.7 | 20 | V | VIN=VOUT+2.0V | 3 | |
| CE Low Voltage | CEL | 0 | 0.3 | V | VIN=VOUT+2.0V | 3 | |
| Short-circuit current | ISHORT | 400 | mA | VIN=VOUT+2.0V | 3 | ||
| Temperature Coefficient | △VOUT/△TA*VOUT | -100 | 100 | ppm/°C | VIN=VOUT+2.0V, IOUT=10mA, -40℃≤TA≤125°C | 3 | |
| Discharge Resistor | RDIS2 | 300 | Ω | VCE<0.5V | 3 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 24 | V | 2 | ||
| Storage Temperature Range | TSTG | -50 | 125 | °C | 2 | ||
| Operating Free-air Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Thermal resistance | θJA | 500 | °C/W | SOT-23-5L | 2 | ||
| Power dissipation | PW | 200 | mW | SOT-23-5L | 2 |
CAD (KiCad official)
- Symbol:
HMIC5205-3.3YM5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
hmic5205-3-3ym5-etched.step/hmic5205-3-3ym5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hmic5205-3-3ym5.step/hmic5205-3-3ym5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
c7e92e2461afcd67, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HMIC5205-3.3YM5
**HXY MOSFET** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
HMIC5205-3.3YM5 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, with a rated input voltage range of 3.0V to 22V (absolute maximum -0.3V to +24V). |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | CE | input | ON/OFF enable control input; high level 1.7V to 20V enables the output, low level 0V to 0.3V puts the device into sleep/standby mode. |
| 4 | NC | unconnected | No connect pin with no internal function. |
| 5 | VOUT | power_out | Regulated 3.3V output (±2% accuracy) for this variant, delivering up to 350mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 3 | | 22 | V | | 3 |
| Output Voltage | VOUT | 3 | | 5 | V | | 3 |
| Voltage Accuracy | | -2 | | 2 | % | IOUT=1mA | 3 |
| Output Current | IOUT | 350 | | | mA | VIN=VOUT+2.0V | 3 |
| Load Regulation | △VOUT | | | 20 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤150mA | 3 |
| Line Regulation | △VOUT/VOUT*△VIN | | 0.015 | 0.2 | %/V | VOUT+1.0V≤VIN≤22V, IOUT=10mA | 3 |
| Voltage Drop | VDIF1 | | | 200 | mV | IOUT=100mA,VOUT=3.3V | 3 |
| Quiescent Current | ISS | | 2 | 4 | μA | VCE=VIN | 3 |
| Standby Current | ISTANDBY | | | 0.1 | μA | VCE=VSS | 3 |
| CE High Voltage | CEH | 1.7 | | 20 | V | VIN=VOUT+2.0V | 3 |
| CE Low Voltage | CEL | 0 | | 0.3 | V | VIN=VOUT+2.0V | 3 |
| Short-circuit current | ISHORT | | 400 | | mA | VIN=VOUT+2.0V | 3 |
| Temperature Coefficient | △VOUT/△TA*VOUT | -100 | | 100 | ppm/°C | VIN=VOUT+2.0V, IOUT=10mA, -40℃≤TA≤125°C | 3 |
| Discharge Resistor | RDIS2 | | 300 | | Ω | VCE<0.5V | 3 |
| Input Voltage (absolute maximum) | VIN | -0.3 | | 24 | V | | 2 |
| Storage Temperature Range | TSTG | -50 | | 125 | °C | | 2 |
| Operating Free-air Temperature Range | TA | -40 | | 85 | °C | | 2 |
| Thermal resistance | θJA | | 500 | | °C/W | SOT-23-5L | 2 |
| Power dissipation | PW | | | 200 | mW | SOT-23-5L | 2 |
## CAD (KiCad official)
- Symbol: `HMIC5205-3.3YM5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `hmic5205-3-3ym5-etched.step` / `hmic5205-3-3ym5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hmic5205-3-3ym5.step` / `hmic5205-3-3ym5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/hmic5205-3-3ym5-datasheet.pdf) (6 pp, sha256 `c7e92e2461afcd67`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hmic5205-3-3ym5-datasheet.pdf)