component
HMCP6002T-I
Public Made by Adomby adom
HXY MOSFET Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHMCP6002T-I
HXY MOSFET · Operational Amplifier · SOP-8
HMCP6002T-I from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, which provides rail-to-rail swing into heavy loads. |
| 2 | -IN A | input | Inverting input of amplifier A. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the input common-mode range includes ground and extends 0.1 V beyond each supply rail. |
| 4 | -VS | power_in | Negative (lowest) power supply; the part operates from +2.0 V to +6.0 V single supply or ±1.0 V to ±3.0 V dual supply. |
| 5 | +IN B | input | Non-inverting input of amplifier B; the input common-mode range includes ground and extends 0.1 V beyond each supply rail. |
| 6 | -IN B | input | Inverting input of amplifier B. |
| 7 | OUT B | output | Amplifier B output, which provides rail-to-rail swing into heavy loads. |
| 8 | +VS | power_in | Positive (highest) power supply; the part operates from +2.0 V to +6.0 V single supply or ±1.0 V to ±3.0 V dual supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode voltage range (min referenced to VS-, max referenced to VS+) | VCM | -0.1 | 0.1 | V | 3 | ||
| Common-mode rejection ratio | CMRR | 70 | 83 | dB | VS = 5.5 V, VCM = −0.1 to 5.6 V | 3 | |
| Common-mode rejection ratio | CMRR | 65 | dB | VCM = 0 to 5.3 V, TA = −40 to +125 ℃ | 3 | ||
| Common-mode rejection ratio | CMRR | 65 | 77 | dB | VS = 2.0 V, VCM = −0.1 to 2.1 V | 3 | |
| Common-mode rejection ratio | CMRR | 60 | dB | VCM = 0 to 1.8 V, TA = −40 to +125 ℃ | 3 | ||
| Open-loop voltage gain | AVOL | 90 | 105 | dB | RL = 25 kΩ, VO = 0.05 to 3.5 V | 3 | |
| Open-loop voltage gain | AVOL | 85 | dB | TA = −40 to +125 ℃ | 3 | ||
| Open-loop voltage gain | AVOL | 85 | 100 | dB | RL = 2 kΩ, VO = 0.15 to 3.5 V | 3 | |
| Open-loop voltage gain | AVOL | 80 | dB | TA = −40 to +125 ℃ | 3 | ||
| Input offset voltage | VOS | -4 | 0.5 | 4 | mV | 3 | |
| Input offset voltage | VOS | -2.8 | 2.8 | mV | TA = −40 to +125 ℃ | 3 | |
| Offset voltage drift | VOSTC | 1 | 3 | μV/℃ | TA = −40 to +125 ℃ | 3 | |
| Power supply rejection ratio | PSRR | 80 | 110 | dB | VS = 2.0 to 5.5 V, VCM < VS+ − 2 V | 3 | |
| Power supply rejection ratio | PSRR | 75 | dB | TA = −40 to +125 ℃ | 3 | ||
| Input bias current | IB | 150 | pA | TA = +85 ℃ | 3 | ||
| Input bias current | IB | 500 | pA | TA = +125 ℃ | 3 | ||
| High output voltage swing (referenced to VS+) | VOH | -9 | -5 | mV | RL = 25 kΩ | 4 | |
| High output voltage swing (referenced to VS+) | VOH | -95 | -63 | mV | RL = 2 kΩ | 4 | |
| Low output voltage swing (referenced to VS-) | VOL | 3.5 | 6 | mV | RL = 25 kΩ | 4 | |
| Low output voltage swing (referenced to VS-) | VOL | 43 | 65 | mV | RL = 2 kΩ | 4 | |
| Short-circuit current, source | ISC | 45 | mA | Source current through 10Ω | 4 | ||
| Short-circuit current, sink | ISC | 55 | mA | Sink current through 10Ω | 4 | ||
| Operating supply voltage | VS | 1.8 | 5.5 | V | TA = 0 to +70 ℃ | 4 | |
| Operating supply voltage | VS | 2 | 5.5 | V | TA = −40 to +125 ℃ | 4 | |
| Quiescent current (per amplifier) | IQ | 75 | 125 | μA | 4 | ||
| Quiescent current (per amplifier) | IQ | 160 | μA | TA = −40 to +125 ℃ | 4 | ||
| Operating temperature range | TA | -40 | 125 | ℃ | 4 | ||
| Supply voltage, +VS to -VS | 7 | V | 2 | ||||
| Input common-mode voltage range (min referenced to -VS, max referenced to +VS) | -0.5 | 0.5 | V | 2 | |||
| Storage temperature range | -65 | 150 | ℃ | 2 | |||
| Junction temperature | 160 | ℃ | 2 | ||||
| Lead temperature (soldering) | 260 | ℃ | Soldering 10 sec | 2 |
CAD (KiCad official)
- Symbol:
HMCP6002T-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hmcp6002t-i-etched.step/hmcp6002t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hmcp6002t-i.step/hmcp6002t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (16 pp, sha256
cdb731d61acea70b, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).