HMCAD1511TR

{
  "schema_version": 1,
  "type": "component",
  "slug": "hmcad1511tr",
  "title": "HMCAD1511TR",
  "brief": "Analog Devices Analog To Digital Converters (ADC), QFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "hmcad1511tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "HMCAD1511TR",
    "manufacturer": "Analog Devices",
    "package": "QFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893290901356544",
    "parts": {
      "symbol": "hmcad1511tr.kicad_sym",
      "footprint": "hmcad1511tr.kicad_mod",
      "model_3d": "hmcad1511tr-hero.glb",
      "model_3d_plain": "hmcad1511tr-etched.glb",
      "model_3d_step": "hmcad1511tr-etched.step",
      "model_3d_step_plain": "hmcad1511tr.step",
      "lbr": "hmcad1511tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C661813",
      "digikey": "1127-1648-2-ND",
      "mouser": "584-HMCAD1511TR"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T01:40:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1127-1648-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-HMCAD1511TR",
        "status": "found",
        "lifecycle": "Restricted Availability"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply, 1.8V; pin 36 is also AVDD."
      },
      {
        "number": "2",
        "name": "CSN",
        "type": "input",
        "description": "Chip select enable for the serial interface, active low; serial data is shifted in while CSN is low."
      },
      {
        "number": "3",
        "name": "SDATA",
        "type": "input",
        "description": "Serial interface data input, latched at every rising edge of SCLK."
      },
      {
        "number": "4",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock input; acceptable frequencies run from 20 MHz down to a few hertz and duty cycle need not be tightly controlled."
      },
      {
        "number": "5",
        "name": "RESETN",
        "type": "input",
        "description": "Active-low reset of the SPI interface; a low-going pulse of minimum 20 ns resets the device asynchronously."
      },
      {
        "number": "6",
        "name": "PD",
        "type": "input",
        "description": "Power-down input to be activated after power is applied to initialize the ADC correctly; a high-going pulse of minimum 20 ns powers down asynchronously, or the SPI pd feature can be used instead."
      },
      {
        "number": "7",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital and I/O power supply, 1.8V; pin 30 is also DVDD."
      },
      {
        "number": "8",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital ground; pin 29 is also DVSS."
      },
      {
        "number": "9",
        "name": "DP1A",
        "type": "output",
        "description": "LVDS channel 1A positive output, forming a differential pair with DN1A."
      },
      {
        "number": "10",
        "name": "DN1A",
        "type": "output",
        "description": "LVDS channel 1A negative output, forming a differential pair with DP1A."
      },
      {
        "number": "11",
        "name": "DP1B",
        "type": "output",
        "description": "LVDS channel 1B positive output, forming a differential pair with DN1B."
      },
      {
        "number": "12",
        "name": "DN1B",
        "type": "output",
        "description": "LVDS channel 1B negative output, forming a differential pair with DP1B."
      },
      {
        "number": "13",
        "name": "DP2A",
        "type": "output",
        "description": "LVDS channel 2A positive output, forming a differential pair with DN2A."
      },
      {
        "number": "14",
        "name": "DN2A",
        "type": "output",
        "description": "LVDS channel 2A negative output, forming a differential pair with DP2A."
      },
      {
        "number": "15",
        "name": "DP2B",
        "type": "output",
        "description": "LVDS channel 2B positive output, forming a differential pair with DN2B."
      },
      {
        "number": "16",
        "name": "DN2B",
        "type": "output",
        "description": "LVDS channel 2B negative output, forming a differential pair with DP2B."
      },
      {
        "number": "17",
        "name": "LCLKP",
        "type": "output",
        "description": "LVDS bit clock positive output, forming a differential pair with LCLKN."
      },
      {
        "number": "18",
        "name": "LCLKN",
        "type": "output",
        "description": "LVDS bit clock negative output, forming a differential pair with LCLKP."
      },
      {
        "number": "19",
        "name": "FCLKP",
        "type": "output",
        "description": "LVDS frame clock (1X) positive output, forming a differential pair with FCLKN."
      },
      {
        "number": "20",
        "name": "FCLKN",
        "type": "output",
        "description": "LVDS frame clock (1X) negative output, forming a differential pair with FCLKP."
      },
      {
        "number": "21",
        "name": "DP3A",
        "type": "output",
        "description": "LVDS channel 3A positive output, forming a differential pair with DN3A."
      },
      {
        "number": "22",
        "name": "DN3A",
        "type": "output",
        "description": "LVDS channel 3A negative output, forming a differential pair with DP3A."
      },
      {
        "number": "23",
        "name": "DP3B",
        "type": "output",
        "description": "LVDS channel 3B positive output, forming a differential pair with DN3B."
      },
      {
        "number": "24",
        "name": "DN3B",
        "type": "output",
        "description": "LVDS channel 3B negative output, forming a differential pair with DP3B."
      },
      {
        "number": "25",
        "name": "DP4A",
        "type": "output",
        "description": "LVDS channel 4A positive output, forming a differential pair with DN4A."
      },
      {
        "number": "26",
        "name": "DN4A",
        "type": "output",
        "description": "LVDS channel 4A negative output, forming a differential pair with DP4A."
      },
      {
        "number": "27",
        "name": "DP4B",
        "type": "output",
        "description": "LVDS channel 4B positive output, forming a differential pair with DN4B."
      },
      {
        "number": "28",
        "name": "DN4B",
        "type": "output",
        "description": "LVDS channel 4B negative output, forming a differential pair with DP4B."
      },
      {
        "number": "29",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital ground; pin 8 is also DVSS."
      },
      {
        "number": "30",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital and I/O power supply, 1.8V; pin 7 is also DVDD."
      },
      {
        "number": "31",
        "name": "AVSS2",
        "type": "power_in",
        "description": "Analog ground domain 2."
      },
      {
        "number": "32",
        "name": "AVDD2",
        "type": "power_in",
        "description": "Analog power supply domain 2, 1.8V."
      },
      {
        "number": "33",
        "name": "OVDD",
        "type": "power_in",
        "description": "Digital CMOS inputs supply voltage."
      },
      {
        "number": "34",
        "name": "CLKN",
        "type": "input",
        "description": "Negative differential input clock."
      },
      {
        "number": "35",
        "name": "CLKP",
        "type": "input",
        "description": "Positive differential input clock."
      },
      {
        "number": "36",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply, 1.8V; pin 1 is also AVDD."
      },
      {
        "number": "37",
        "name": "IN4",
        "type": "input",
        "description": "Negative differential analog input signal, channel 4."
      },
      {
        "number": "38",
        "name": "IP4",
        "type": "input",
        "description": "Positive differential analog input signal, channel 4."
      },
      {
        "number": "39",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground; pins 42 and 45 are also AVSS."
      },
      {
        "number": "40",
        "name": "IN3",
        "type": "input",
        "description": "Negative differential analog input signal, channel 3."
      },
      {
        "number": "41",
        "name": "IP3",
        "type": "input",
        "description": "Positive differential analog input signal, channel 3."
      },
      {
        "number": "42",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground; pins 39 and 45 are also AVSS."
      },
      {
        "number": "43",
        "name": "IN2",
        "type": "input",
        "description": "Negative differential analog input signal, channel 2."
      },
      {
        "number": "44",
        "name": "IP2",
        "type": "input",
        "description": "Positive differential analog input signal, channel 2."
      },
      {
        "number": "45",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground; pins 39 and 42 are also AVSS."
      },
      {
        "number": "46",
        "name": "IN1",
        "type": "input",
        "description": "Negative differential analog input signal, channel 1."
      },
      {
        "number": "47",
        "name": "IP1",
        "type": "input",
        "description": "Positive differential analog input signal, channel 1."
      },
      {
        "number": "48",
        "name": "VCM",
        "type": "output",
        "description": "Common mode output pin at 0.5*AVDD."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package hint says QFN-48-EP(7x7), but the datasheet only describes a 7x7 mm QFN 48 (LP7D / LP7) ; Table 3 lists 48 numbered pins that match the QFN-48 count, but the package drawing (Figure 2) was n; The datasheet does not state a variant-specific ordering code. The Package Information table lists o",
          "exposed pad 49 added from the footprint"
        ],
        "pages_sent": 13,
        "cost_usd": 0.114,
        "at": "2026-10-21T01:36:45"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893290901356544",
        "pages": 30,
        "sha256": "a28daf06a213ac7d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hmcad1511tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hmcad1511tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "64e4c27a036f9304779a958a2ad5dee96f61b3c609fffd38565ef79900940107",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices",
      "Package": "QFN-48-EP(7x7)",
      "Category": "Data Acquisition",
      "Pins": "49"
    },
    "appearance": {
      "contacts": {
        "quote": "Part Number Package Body Material Lead Finish MSL [1] Package Marking [2] HMCAD1511 RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn Level 2A HAD1511",
        "page": 30,
        "doc": "ds.pdf",
        "plating": "tin"
      },
      "version": 1,
      "datasheet_sha256": "a28daf06a213ac7d0fd028b28c56922a498ed068288d35e994fd954cdc7a9d6e"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "a28daf06a213ac7d0fd028b28c56922a498ed068288d35e994fd954cdc7a9d6e",
      "rows": [
        {
          "name": "Clock input DC duty cycle",
          "symbol": "",
          "kind": "electrical",
          "unit": "% high",
          "min": 45,
          "typ": null,
          "max": 55,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "LVDS bit-clock duty cycle",
          "symbol": "",
          "kind": "timing",
          "unit": "% LCLK cycle",
          "min": 45,
          "typ": null,
          "max": 55,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Low level input voltage (CMOS logic inputs)",
          "symbol": "VLI",
          "kind": "electrical",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": 0.8,
          "conditions": "VOVDD ≥ 3.0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "High level input leakage current",
          "symbol": "IHI",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Low level input leakage current",
          "symbol": "ILI",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "AVDD voltage (reference AVSS)",
          "symbol": "AVDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 2.3,
          "conditions": "Reference pin AVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "DVDD voltage (reference DVSS)",
          "symbol": "DVDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 2.3,
          "conditions": "Reference pin DVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "OVDD voltage (reference AVSS)",
          "symbol": "OVDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Reference pin AVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "AVSS / DVSS voltage",
          "symbol": "AVSS/DVSS",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 0.3,
          "conditions": "Reference pin DVSS / AVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Analog inputs and outputs voltage (reference AVSS)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 2.3,
          "conditions": "Reference pin AVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "CLKx voltage (reference AVSS)",
          "symbol": "CLKx",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Reference pin AVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "LVDS outputs voltage (reference DVSS)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 2.3,
          "conditions": "Reference pin DVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Digital inputs voltage (reference DVSS)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Reference pin DVSS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -60,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 110,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "hmcad1511tr"
  ],
  "discovery_pitch": "HMCAD1511TR (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hmcad1511tr.kicad_sym",
    "hmcad1511tr.kicad_mod",
    "hmcad1511tr.glb",
    "hmcad1511tr.step",
    "hmcad1511tr.lbr",
    "docs/hero.png",
    "docs/hmcad1511tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hmcad1511tr-hero.glb",
    "hmcad1511tr-hero.overlay.json",
    "hmcad1511tr-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}