main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hmc909lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hmc909lp4etr: viewers · Ray
hmc909lp4etr-etched.fit.json hmc909lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hmc909lp4etr-etched.glb hmc909lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hmc909lp4etr-etched.step hmc909lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hmc909lp4etr.glb Publish 0.1.0 · Ray
hmc909lp4etr.kicad_mod Publish 0.1.0 · Ray
hmc909lp4etr.kicad_sym Publish 0.1.0 · Ray
hmc909lp4etr.lbr Publish 0.1.0 · Ray
hmc909lp4etr.step Publish 0.1.0 · Ray
package.json hmc909lp4etr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json hmc909lp4etr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/hmc909lp4etr · Ray

HMC909LP4ETR

Analog Devices · RF Detectors · QFN-24-EP(4x4)

HMC909LP4ETR from Analog Devices, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vcc power_in Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance.
2 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
3 IN+ input Positive RF input pin for differential single-ended input configuration with DC bias at approximately Vcc-1.2V and 120Ω impedance to IN-.
4 IN- input Negative RF input pin for differential single-ended input configuration with DC bias at approximately Vcc-1.2V and 120Ω impedance to IN+.
5 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
6 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
7 ENX input Disable pin for power-down control; connect to GND for normal operation or apply voltage >0.8xVcc to enable low-power standby mode (3mA supply current).
8 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
9 COFSA passive High-pass filter capacitor connection point A; connect capacitor between COFSA and COFSB to determine 3dB cutoff frequency per formula fc=1/(π×fL×3.2).
10 COFSB passive High-pass filter capacitor connection point B; connect capacitor between COFSB and COFSA to determine 3dB cutoff frequency of input signal high-pass filter.
11 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
12 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
13 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
14 VSET input Set point input for negative feedback and controller mode operation; accepts 0.35-2.1V for slope and intercept adjustment with 5MΩ input resistance.
15 RMSOUT output Logarithmic output providing true RMS indication of input RF power with output voltage range 0.35-2.1V and 8mA source/0.53mA sink current capability.
16 Vcc power_in Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance.
17 SCI1 input Digitally programmable integration bandwidth control bit 1 (LSB); set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI2-4 for octave integration time steps.
18 SCI2 input Digitally programmable integration bandwidth control bit 2; set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI1, SCI3, SCI4 to form 4-bit integration setting.
19 SCI3 input Digitally programmable integration bandwidth control bit 3; set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI1, SCI2, SCI4 to form 4-bit integration setting.
20 SCI4 input Digitally programmable integration bandwidth control bit 4 (MSB); set >0.8xVcc to enable and <0.2xVcc to disable; valid settings SCI=0000 to 1100 only (1101-1111 forbidden states).
21 Vcc power_in Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance.
22 GND power_in Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding.
23 Vcc power_in Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance.
24 N/C unconnected No internal connection; however, all measurement data in this datasheet was taken with this pin externally connected to RF/DC ground for improved performance.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package QFN-24-EP(4x4)
Category RF And Wireless
Pins 25

CAD (KiCad official)

  • Symbol: HMC909LP4ETR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: hmc909lp4etr-etched.step / hmc909lp4etr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hmc909lp4etr.step / hmc909lp4etr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (21 pp, sha256 254d1f5556c6c2c0, retrieved 2026-09-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF