← Commit history

Initial commit: component/hmc909lp4etr

Ray ·10df0afdb1 ·
2 files changed +308
README.mdadded+61
@@ -0,0 +1,61 @@+# HMC909LP4ETR++**Analog Devices** · RF Detectors · QFN-24-EP(4x4)++HMC909LP4ETR from Analog Devices, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Vcc | power_in | Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance. |+| 2 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 3 | IN+ | input | Positive RF input pin for differential single-ended input configuration with DC bias at approximately Vcc-1.2V and 120Ω impedance to IN-. |+| 4 | IN- | input | Negative RF input pin for differential single-ended input configuration with DC bias at approximately Vcc-1.2V and 120Ω impedance to IN+. |+| 5 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 6 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 7 | ENX | input | Disable pin for power-down control; connect to GND for normal operation or apply voltage >0.8xVcc to enable low-power standby mode (3mA supply current). |+| 8 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 9 | COFSA | passive | High-pass filter capacitor connection point A; connect capacitor between COFSA and COFSB to determine 3dB cutoff frequency per formula fc=1/(π×fL×3.2). |+| 10 | COFSB | passive | High-pass filter capacitor connection point B; connect capacitor between COFSB and COFSA to determine 3dB cutoff frequency of input signal high-pass filter. |+| 11 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 12 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 13 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 14 | VSET | input | Set point input for negative feedback and controller mode operation; accepts 0.35-2.1V for slope and intercept adjustment with 5MΩ input resistance. |+| 15 | RMSOUT | output | Logarithmic output providing true RMS indication of input RF power with output voltage range 0.35-2.1V and 8mA source/0.53mA sink current capability. |+| 16 | Vcc | power_in | Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance. |+| 17 | SCI1 | input | Digitally programmable integration bandwidth control bit 1 (LSB); set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI2-4 for octave integration time steps. |+| 18 | SCI2 | input | Digitally programmable integration bandwidth control bit 2; set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI1, SCI3, SCI4 to form 4-bit integration setting. |+| 19 | SCI3 | input | Digitally programmable integration bandwidth control bit 3; set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI1, SCI2, SCI4 to form 4-bit integration setting. |+| 20 | SCI4 | input | Digitally programmable integration bandwidth control bit 4 (MSB); set >0.8xVcc to enable and <0.2xVcc to disable; valid settings SCI=0000 to 1100 only (1101-1111 forbidden states). |+| 21 | Vcc | power_in | Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance. |+| 22 | GND | power_in | Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding. |+| 23 | Vcc | power_in | Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance. |+| 24 | N/C | unconnected | No internal connection; however, all measurement data in this datasheet was taken with this pin externally connected to RF/DC ground for improved performance. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | QFN-24-EP(4x4) |+| Category | RF And Wireless |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `HMC909LP4ETR`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `hmc909lp4etr-etched.step` / `hmc909lp4etr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hmc909lp4etr.step` / `hmc909lp4etr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588935593867030528) (21 pp, sha256 `254d1f5556c6c2c0`, retrieved 2026-09-17, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hmc909lp4etr-datasheet.pdf)
page.jsonadded+247
@@ -0,0 +1,247 @@+{+  "slug": "hmc909lp4etr",+  "version": "0.1.0",+  "type": "component",+  "description": "Analog Devices RF Detectors, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "hmc909lp4etr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "hmc909lp4etr.kicad_sym",+    "hmc909lp4etr.kicad_mod",+    "hmc909lp4etr.glb",+    "hmc909lp4etr.step",+    "hmc909lp4etr.lbr",+    "docs/hero.png",+    "docs/hmc909lp4etr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "HMC909LP4ETR",+    "manufacturer": "Analog Devices",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "RF And Wireless",+    "subcategory": "RF Detectors",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588935593867030528",+    "parts": {+      "symbol": "hmc909lp4etr.kicad_sym",+      "footprint": "hmc909lp4etr.kicad_mod",+      "model_3d": "hmc909lp4etr-etched.glb",+      "model_3d_plain": "hmc909lp4etr.glb",+      "model_3d_step": "hmc909lp4etr-etched.step",+      "model_3d_step_plain": "hmc909lp4etr.step",+      "lbr": "hmc909lp4etr.lbr"+    },+    "distributor_links": {+      "lcsc": "C462179"+    },+    "pins": [+      {+        "number": "1",+        "name": "Vcc",+        "type": "power_in",+        "description": "Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "3",+        "name": "IN+",+        "type": "input",+        "description": "Positive RF input pin for differential single-ended input configuration with DC bias at approximately Vcc-1.2V and 120Ω impedance to IN-."+      },+      {+        "number": "4",+        "name": "IN-",+        "type": "input",+        "description": "Negative RF input pin for differential single-ended input configuration with DC bias at approximately Vcc-1.2V and 120Ω impedance to IN+."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "7",+        "name": "ENX",+        "type": "input",+        "description": "Disable pin for power-down control; connect to GND for normal operation or apply voltage >0.8xVcc to enable low-power standby mode (3mA supply current)."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "9",+        "name": "COFSA",+        "type": "passive",+        "description": "High-pass filter capacitor connection point A; connect capacitor between COFSA and COFSB to determine 3dB cutoff frequency per formula fc=1/(π×fL×3.2)."+      },+      {+        "number": "10",+        "name": "COFSB",+        "type": "passive",+        "description": "High-pass filter capacitor connection point B; connect capacitor between COFSB and COFSA to determine 3dB cutoff frequency of input signal high-pass filter."+      },+      {+        "number": "11",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "13",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "14",+        "name": "VSET",+        "type": "input",+        "description": "Set point input for negative feedback and controller mode operation; accepts 0.35-2.1V for slope and intercept adjustment with 5MΩ input resistance."+      },+      {+        "number": "15",+        "name": "RMSOUT",+        "type": "output",+        "description": "Logarithmic output providing true RMS indication of input RF power with output voltage range 0.35-2.1V and 8mA source/0.53mA sink current capability."+      },+      {+        "number": "16",+        "name": "Vcc",+        "type": "power_in",+        "description": "Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance."+      },+      {+        "number": "17",+        "name": "SCI1",+        "type": "input",+        "description": "Digitally programmable integration bandwidth control bit 1 (LSB); set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI2-4 for octave integration time steps."+      },+      {+        "number": "18",+        "name": "SCI2",+        "type": "input",+        "description": "Digitally programmable integration bandwidth control bit 2; set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI1, SCI3, SCI4 to form 4-bit integration setting."+      },+      {+        "number": "19",+        "name": "SCI3",+        "type": "input",+        "description": "Digitally programmable integration bandwidth control bit 3; set >0.8xVcc to enable and <0.2xVcc to disable; combines with SCI1, SCI2, SCI4 to form 4-bit integration setting."+      },+      {+        "number": "20",+        "name": "SCI4",+        "type": "input",+        "description": "Digitally programmable integration bandwidth control bit 4 (MSB); set >0.8xVcc to enable and <0.2xVcc to disable; valid settings SCI=0000 to 1100 only (1101-1111 forbidden states)."+      },+      {+        "number": "21",+        "name": "Vcc",+        "type": "power_in",+        "description": "Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance."+      },+      {+        "number": "22",+        "name": "GND",+        "type": "power_in",+        "description": "Package ground pin that must be connected to RF/DC ground plane; multiple ground pins for reduced inductance and improved grounding."+      },+      {+        "number": "23",+        "name": "Vcc",+        "type": "power_in",+        "description": "Power supply pin; connect 4.5-5.5V nominal 5V with appropriate filtering; multiple power pins for reduced inductance."+      },+      {+        "number": "24",+        "name": "N/C",+        "type": "unconnected",+        "description": "No internal connection; however, all measurement data in this datasheet was taken with this pin externally connected to RF/DC ground for improved performance."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed pad designation not explicitly numbered in pin descriptions table; designated as 'PAD' based; SCI1-SCI4 pin order (pins 17-20) assumed based on datasheet listing 'SCI1 - SCI4' in sequential orde",+          "exposed pad 25 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint",+          "2/25 pins cited to the wrong page (name found elsewhere): ['18:SCI2@p11', '19:SCI3@p11']"+        ],+        "pages_sent": 21,+        "cost_usd": 0.3596,+        "at": "2026-09-17T21:09:43"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588935593867030528",+        "pages": 21,+        "sha256": "254d1f5556c6c2c0",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file