main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hmc704lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hmc704lp4etr: viewers · Ray
hmc704lp4etr-etched.fit.json hmc704lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hmc704lp4etr-etched.glb hmc704lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hmc704lp4etr-etched.step hmc704lp4etr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hmc704lp4etr.glb Publish 0.1.0 · Ray
hmc704lp4etr.kicad_mod Publish 0.1.0 · Ray
hmc704lp4etr.kicad_sym Publish 0.1.0 · Ray
hmc704lp4etr.lbr Publish 0.1.0 · Ray
hmc704lp4etr.step Publish 0.1.0 · Ray
package.json hmc704lp4etr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json hmc704lp4etr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/hmc704lp4etr · Ray

HMC704LP4ETR

Analog Devices · Clock Generators, PLLs, Frequency Synthesizers · QFN-24-EP(4x4)

HMC704LP4ETR from Analog Devices, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDI input Main Serial port data input for SPI communication.
2 SCK input Main Serial port clock input for SPI communication.
3 ASEN output Auxiliary Serial Port Enable Output.
4 LD_SDO output Lock Detect Output or Serial Data Output or General Purpose Output, selectable via Reg 0Fh.
5 VCOIN input Complementary input to RF Prescaler, internally biased to 2.0V DC, requires 100pF ceramic bypass capacitor to ground plane for single-ended operation.
6 VCOIP input Input to RF Prescaler from external VCO, small signal with internal 2.0V DC bias, requires external AC coupling.
7 VCCHF power_in Power supply pin for RF Section, nominal +3.3V, requires decoupling capacitor placed as close as possible to pin.
8 N/C unconnected No Connect pad.
9 VCCPS power_in Power supply for RF Prescaler, nominal +3.3V.
10 N/C unconnected No Connect pad.
11 VCCPD power_in Power supply for phase detector, nominal +3.3V.
12 BIAS power_out Precision bias reference voltage output, 1.920V ±20mV nominal, requires external bypass decoupling, cannot drive external loads, must be measured with ≥10GΩ meter.
13 N/C unconnected No Connect pad.
14 AVDD power_in Power supply for analog bias generation circuits, nominal +3.3V.
15 VPPCP power_in Power supply for charge pump, nominal +5V, must be equal to VDDLS.
16 CP output Charge pump output for external loop filter VCO tuning control.
17 VDDLS power_in Power supply for charge pump digital section, nominal +5V, must be equal to VPPCP.
18 RVDD power_in Power supply for reference path, nominal +3.3V.
19 XREFP input Reference input for external crystal oscillator, supports DC to 350MHz with 100Ω
20 ASCK output Auxiliary Serial Port Clock Output for external slave devices.
21 ASD output Auxiliary Serial Port Data Output for external slave devices.
22 DVDD power_in Digital power supply, nominal +3.3V.
23 CEN input Hardware Chip Enable input, active low controls chip enable/power down mode per Reg 01h[0].
24 SEN input Main Serial port latch enable input for SPI control, active low.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package QFN-24-EP(4x4)
Category Clock/Timing
Pins 25

CAD (KiCad official)

  • Symbol: HMC704LP4ETR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: hmc704lp4etr-etched.step / hmc704lp4etr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hmc704lp4etr.step / hmc704lp4etr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (44 pp, sha256 75728b3e1eed87df, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF