← Commit history

Initial commit: component/hmc704lp4etr

Ray ·92502e1435 ·
2 files changed +307
README.mdadded+61
@@ -0,0 +1,61 @@+# HMC704LP4ETR++**Analog Devices** · Clock Generators, PLLs, Frequency Synthesizers · QFN-24-EP(4x4)++HMC704LP4ETR from Analog Devices, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDI | input | Main Serial port data input for SPI communication. |+| 2 | SCK | input | Main Serial port clock input for SPI communication. |+| 3 | ASEN | output | Auxiliary Serial Port Enable Output. |+| 4 | LD_SDO | output | Lock Detect Output or Serial Data Output or General Purpose Output, selectable via Reg 0Fh. |+| 5 | VCOIN | input | Complementary input to RF Prescaler, internally biased to 2.0V DC, requires 100pF ceramic bypass capacitor to ground plane for single-ended operation. |+| 6 | VCOIP | input | Input to RF Prescaler from external VCO, small signal with internal 2.0V DC bias, requires external AC coupling. |+| 7 | VCCHF | power_in | Power supply pin for RF Section, nominal +3.3V, requires decoupling capacitor placed as close as possible to pin. |+| 8 | N/C | unconnected | No Connect pad. |+| 9 | VCCPS | power_in | Power supply for RF Prescaler, nominal +3.3V. |+| 10 | N/C | unconnected | No Connect pad. |+| 11 | VCCPD | power_in | Power supply for phase detector, nominal +3.3V. |+| 12 | BIAS | power_out | Precision bias reference voltage output, 1.920V ±20mV nominal, requires external bypass decoupling, cannot drive external loads, must be measured with ≥10GΩ meter. |+| 13 | N/C | unconnected | No Connect pad. |+| 14 | AVDD | power_in | Power supply for analog bias generation circuits, nominal +3.3V. |+| 15 | VPPCP | power_in | Power supply for charge pump, nominal +5V, must be equal to VDDLS. |+| 16 | CP | output | Charge pump output for external loop filter VCO tuning control. |+| 17 | VDDLS | power_in | Power supply for charge pump digital section, nominal +5V, must be equal to VPPCP. |+| 18 | RVDD | power_in | Power supply for reference path, nominal +3.3V. |+| 19 | XREFP | input | Reference input for external crystal oscillator, supports DC to 350MHz with 100Ω||3pF input impedance. |+| 20 | ASCK | output | Auxiliary Serial Port Clock Output for external slave devices. |+| 21 | ASD | output | Auxiliary Serial Port Data Output for external slave devices. |+| 22 | DVDD | power_in | Digital power supply, nominal +3.3V. |+| 23 | CEN | input | Hardware Chip Enable input, active low controls chip enable/power down mode per Reg 01h[0]. |+| 24 | SEN | input | Main Serial port latch enable input for SPI control, active low. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | QFN-24-EP(4x4) |+| Category | Clock/Timing |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `HMC704LP4ETR`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `hmc704lp4etr-etched.step` / `hmc704lp4etr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hmc704lp4etr.step` / `hmc704lp4etr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913189223981056) (44 pp, sha256 `75728b3e1eed87df`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/hmc704lp4etr-datasheet.pdf)
page.jsonadded+246
@@ -0,0 +1,246 @@+{+  "slug": "hmc704lp4etr",+  "version": "0.1.0",+  "type": "component",+  "description": "Analog Devices Clock Generators, PLLs, Frequency Synthesizers, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "clock-timing",+    "hmc704lp4etr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "hmc704lp4etr.kicad_sym",+    "hmc704lp4etr.kicad_mod",+    "hmc704lp4etr.glb",+    "hmc704lp4etr.step",+    "hmc704lp4etr.lbr",+    "docs/hero.png",+    "docs/hmc704lp4etr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "HMC704LP4ETR",+    "manufacturer": "Analog Devices",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Clock/Timing",+    "subcategory": "Clock Generators, PLLs, Frequency Synthesizers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913189223981056",+    "parts": {+      "symbol": "hmc704lp4etr.kicad_sym",+      "footprint": "hmc704lp4etr.kicad_mod",+      "model_3d": "hmc704lp4etr-etched.glb",+      "model_3d_plain": "hmc704lp4etr.glb",+      "model_3d_step": "hmc704lp4etr-etched.step",+      "model_3d_step_plain": "hmc704lp4etr.step",+      "lbr": "hmc704lp4etr.lbr"+    },+    "distributor_links": {+      "lcsc": "C495327"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDI",+        "type": "input",+        "description": "Main Serial port data input for SPI communication."+      },+      {+        "number": "2",+        "name": "SCK",+        "type": "input",+        "description": "Main Serial port clock input for SPI communication."+      },+      {+        "number": "3",+        "name": "ASEN",+        "type": "output",+        "description": "Auxiliary Serial Port Enable Output."+      },+      {+        "number": "4",+        "name": "LD_SDO",+        "type": "output",+        "description": "Lock Detect Output or Serial Data Output or General Purpose Output, selectable via Reg 0Fh."+      },+      {+        "number": "5",+        "name": "VCOIN",+        "type": "input",+        "description": "Complementary input to RF Prescaler, internally biased to 2.0V DC, requires 100pF ceramic bypass capacitor to ground plane for single-ended operation."+      },+      {+        "number": "6",+        "name": "VCOIP",+        "type": "input",+        "description": "Input to RF Prescaler from external VCO, small signal with internal 2.0V DC bias, requires external AC coupling."+      },+      {+        "number": "7",+        "name": "VCCHF",+        "type": "power_in",+        "description": "Power supply pin for RF Section, nominal +3.3V, requires decoupling capacitor placed as close as possible to pin."+      },+      {+        "number": "8",+        "name": "N/C",+        "type": "unconnected",+        "description": "No Connect pad."+      },+      {+        "number": "9",+        "name": "VCCPS",+        "type": "power_in",+        "description": "Power supply for RF Prescaler, nominal +3.3V."+      },+      {+        "number": "10",+        "name": "N/C",+        "type": "unconnected",+        "description": "No Connect pad."+      },+      {+        "number": "11",+        "name": "VCCPD",+        "type": "power_in",+        "description": "Power supply for phase detector, nominal +3.3V."+      },+      {+        "number": "12",+        "name": "BIAS",+        "type": "power_out",+        "description": "Precision bias reference voltage output, 1.920V ±20mV nominal, requires external bypass decoupling, cannot drive external loads, must be measured with ≥10GΩ meter."+      },+      {+        "number": "13",+        "name": "N/C",+        "type": "unconnected",+        "description": "No Connect pad."+      },+      {+        "number": "14",+        "name": "AVDD",+        "type": "power_in",+        "description": "Power supply for analog bias generation circuits, nominal +3.3V."+      },+      {+        "number": "15",+        "name": "VPPCP",+        "type": "power_in",+        "description": "Power supply for charge pump, nominal +5V, must be equal to VDDLS."+      },+      {+        "number": "16",+        "name": "CP",+        "type": "output",+        "description": "Charge pump output for external loop filter VCO tuning control."+      },+      {+        "number": "17",+        "name": "VDDLS",+        "type": "power_in",+        "description": "Power supply for charge pump digital section, nominal +5V, must be equal to VPPCP."+      },+      {+        "number": "18",+        "name": "RVDD",+        "type": "power_in",+        "description": "Power supply for reference path, nominal +3.3V."+      },+      {+        "number": "19",+        "name": "XREFP",+        "type": "input",+        "description": "Reference input for external crystal oscillator, supports DC to 350MHz with 100Ω||3pF input impedance."+      },+      {+        "number": "20",+        "name": "ASCK",+        "type": "output",+        "description": "Auxiliary Serial Port Clock Output for external slave devices."+      },+      {+        "number": "21",+        "name": "ASD",+        "type": "output",+        "description": "Auxiliary Serial Port Data Output for external slave devices."+      },+      {+        "number": "22",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital power supply, nominal +3.3V."+      },+      {+        "number": "23",+        "name": "CEN",+        "type": "input",+        "description": "Hardware Chip Enable input, active low controls chip enable/power down mode per Reg 01h[0]."+      },+      {+        "number": "24",+        "name": "SEN",+        "type": "input",+        "description": "Main Serial port latch enable input for SPI control, active low."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed pad (EP) mentioned in package designation and outline notes but not explicitly listed with a; Ground connections (AGND/DGND referenced in specifications and notes) are not assigned explicit pin ; Pin 4 (LD_SDO) is multiplexed between Lock Detect Output, Serial Data Output, and General Purpose Ou",+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 44,+        "cost_usd": 0.4864,+        "at": "2026-09-22T13:10:03"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913189223981056",+        "pages": 44,+        "sha256": "75728b3e1eed87df",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file