main
Ray Publish 0.1.0 f40bddd

HLP5907MFX-2.8

HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L

HLP5907MFX-2.8 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input; the datasheet gives an absolute maximum input voltage of 6 V and specifies electrical characteristics with VIN = VOUT + 1 V.
2 GND power_in Ground reference pin (printed as "GDN" in the datasheet pin table).
3 CE input Enable pin: pulling CE to 0 V shuts the output off, with shutdown current of 0.1 μA typical and 1 μA maximum (ICEL, VCE = 0 V).
4 NC unconnected Not connected; the datasheet lists this pin as floating (悬空).
5 VOUT power_out Regulated output rated for 300 mA maximum output current (IOUTmax) across the 1.2 V to 3.6 V output range.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOT-23-5L
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage Vin 6 V 2
Output current Iout 450 mA 2
Maximum allowable power dissipation PD 300 mW 2
Operating temperature TOPR -20 85 °C 2
Storage temperature Tstg -40 125 °C 2
Soldering temperature Tsolder 260 °C 10 s 2
Output voltage accuracy (effective output voltage, lower limit) VOUT(E) 0.98 x VOUT(T) IOUT=40mA, VIN=Vout+1V 3
Output voltage accuracy (effective output voltage, upper limit) VOUT(E) 1.02 x VOUT(T) IOUT=40mA, VIN=Vout+1V 3
Input voltage VIN 6 V 3
Maximum output current IOUTmax 300 mA VIN=Vout+1V 3
Load regulation ΔVOUT 50 mV VIN=Vout+1V, 1mA≤IOUT≤100mA 3
Dropout voltage Vdif1 90 mV IOUT=100mA 3
Dropout voltage Vdif2 230 mV IOUT=200mA 3
Quiescent current ISS 70 μA VIN=Vout+1V 3
Shutdown current ICEL 1 μA Vce=0V 3
Line regulation ΔVOUT/(ΔVIN·VOUT) 0.05 %/V IOUT=40mA, Vout+1V ≤ VIN ≤ 8V 3
Output noise voltage en 50 uVrms IOUT=40mA, 300Hz~50kHz 3
Ripple rejection ratio PSRR 70 dB Vin=[Vout+1]V +1Vp-pAC, IOUT=40mA, f=1kHz 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: HLP5907MFX-2.8
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: hlp5907mfx-2-8-etched.step / hlp5907mfx-2-8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hlp5907mfx-2-8.step / hlp5907mfx-2-8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (5 pp, sha256 34eb9323f6798c32, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF