component
HLP5907MFX-2.5
Public Made by Adomby adom
HXY MOSFET Linear Voltage Regulators (LDO), SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HLP5907MFX-2.5
HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP5907MFX-2.5 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Regulator input supply pin; the absolute maximum input voltage is 6 V and the input must be at least Vout+1V for regulation. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Chip enable pin; pulling it low (Vce=0V) turns the output off and reduces shutdown current to 1 µA maximum (0.1 µA typical). |
| 4 | NC | unconnected | No internal connection; leave floating. |
| 5 | VOUT | power_out | Regulated output pin, rated for a maximum output current of 300 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT(E) | 0.98 | 1.02 | x VOUT(T) | IOUT=40mA, VIN=Vout+1V (Note 2) | 3 | |
| Load regulation | ΔVOUT | 50 | mV | VIN=Vout+1V, 1mA≤IOUT≤100mA | 3 | ||
| Dropout voltage | Vdif1 | 90 | mV | IOUT=100mA | 3 | ||
| Dropout voltage | Vdif2 | 230 | mV | IOUT=200mA | 3 | ||
| Shutdown current | ICEL | 1 | μA | Vce=0V | 3 | ||
| Input voltage | VIN | 6 | V | 3 | |||
| Maximum output current | IOUTmax | 300 | mA | VIN=Vout+1V | 3 | ||
| Quiescent current | ISS | 70 | μA | VIN=Vout+1V | 3 | ||
| Line regulation | ΔVOUT/(ΔVIN•VOUT) | 0.05 | %/V | IOUT=40mA, Vout+1V≤VIN≤8V | 3 | ||
| Output noise voltage | en | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 3 | ||
| Power supply rejection ratio | PSRR | 70 | dB | Vin=[Vout+1]V +1Vp-pAC, IOUT=40mA, f=1kHz | 3 | ||
| Input voltage | Vin | 6 | V | 2 | |||
| Output current | Iout | 450 | mA | 2 | |||
| Maximum allowable power dissipation | PD | 300 | mW | 2 | |||
| Operating temperature | TOPR | -20 | 85 | ℃ | 2 | ||
| Storage temperature | Tstg | -40 | 125 | ℃ | 2 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10s | 2 |
CAD (KiCad official)
- Symbol:
HLP5907MFX-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
hlp5907mfx-2-5-etched.step/hlp5907mfx-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlp5907mfx-2-5.step/hlp5907mfx-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (5 pp, sha256
0ea402bd4b145f14, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HLP5907MFX-2.5
**HXY MOSFET** · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP5907MFX-2.5 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Regulator input supply pin; the absolute maximum input voltage is 6 V and the input must be at least Vout+1V for regulation. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Chip enable pin; pulling it low (Vce=0V) turns the output off and reduces shutdown current to 1 µA maximum (0.1 µA typical). |
| 4 | NC | unconnected | No internal connection; leave floating. |
| 5 | VOUT | power_out | Regulated output pin, rated for a maximum output current of 300 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT(E) | 0.98 | | 1.02 | x VOUT(T) | IOUT=40mA, VIN=Vout+1V (Note 2) | 3 |
| Load regulation | ΔVOUT | | | 50 | mV | VIN=Vout+1V, 1mA≤IOUT≤100mA | 3 |
| Dropout voltage | Vdif1 | | | 90 | mV | IOUT=100mA | 3 |
| Dropout voltage | Vdif2 | | | 230 | mV | IOUT=200mA | 3 |
| Shutdown current | ICEL | | | 1 | μA | Vce=0V | 3 |
| Input voltage | VIN | | | 6 | V | | 3 |
| Maximum output current | IOUTmax | | 300 | | mA | VIN=Vout+1V | 3 |
| Quiescent current | ISS | | 70 | | μA | VIN=Vout+1V | 3 |
| Line regulation | ΔVOUT/(ΔVIN•VOUT) | | 0.05 | | %/V | IOUT=40mA, Vout+1V≤VIN≤8V | 3 |
| Output noise voltage | en | | 50 | | uVrms | IOUT=40mA, 300Hz~50kHz | 3 |
| Power supply rejection ratio | PSRR | | 70 | | dB | Vin=[Vout+1]V +1Vp-pAC, IOUT=40mA, f=1kHz | 3 |
| Input voltage | Vin | | | 6 | V | | 2 |
| Output current | Iout | | | 450 | mA | | 2 |
| Maximum allowable power dissipation | PD | | | 300 | mW | | 2 |
| Operating temperature | TOPR | -20 | | 85 | ℃ | | 2 |
| Storage temperature | Tstg | -40 | | 125 | ℃ | | 2 |
| Soldering temperature | Tsolder | | | 260 | ℃ | 10s | 2 |
## CAD (KiCad official)
- Symbol: `HLP5907MFX-2.5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `hlp5907mfx-2-5-etched.step` / `hlp5907mfx-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hlp5907mfx-2-5.step` / `hlp5907mfx-2-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/hlp5907mfx-2-5-datasheet.pdf) (5 pp, sha256 `0ea402bd4b145f14`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hlp5907mfx-2-5-datasheet.pdf)