component
HLP2980IM5X-5.0
Public Made by Adomby adom
HXY MOSFET Linear Voltage Regulators (LDO), SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHLP2980IM5X-5.0
HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP2980IM5X-5.0 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input; datasheet gives an absolute maximum of 16 V and an operating range of 2.5-16 V (the electrical table lists 1.8-15 V). |
| 2 | VSS | power_in | Ground pin; VOUT and VCE are rated from VSS-0.3 V up to VIN+0.3 V. |
| 3 | CE | input | Enable input that switches the output off to cut power consumption; high level is 0.3*VIN to VIN, low level is 0 to 0.5 V, and input current is at most 1 µA. |
| 4 | NC | unconnected | No connection; the datasheet describes this pin as floating (悬空). |
| 5 | VOUT | power_out | Regulated 5.0 V output (±2%) with 150 mA maximum output current, using a 10 µF minimum output capacitor with ESR below 0.5 Ω. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (ratio to VOUT(T)) | VOUT(E) | 0.975 | 1.025 | xVOUT(T) | IOUT=1mA, VIN=7V, VCE=1.6V | 3 | |
| Output voltage | VOUT(E) | 5 | V | IOUT=1mA, VIN=7V, VCE=1.6V | 3 | ||
| Maximum output current | IOUT(max) | 100 | mA | VIN=6.0V | 3 | ||
| Load regulation | ΔVOUT | 8 | mV | VIN=VCE=6.0V, 1mA≤IOUT≤100mA | 3 | ||
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | 0.39 | %/V | IOUT=10mA, 6.0V≤VIN≤15V | 3 | ||
| Dropout voltage 1 | Vdrop1 | 30 | mV | VIN=6.0V, IOUT=10mA | 3 | ||
| Dropout voltage 2 | Vdrop2 | 310 | mV | VIN=6.0V, IOUT=100mA | 3 | ||
| Supply current | ISS1 | 50 | μA | VIN=VCE=5V | 3 | ||
| Standby supply current | ISS2 | 1 | μA | VIN=5V, VCE=VSS | 3 | ||
| CE input low voltage | VCEL | 0 | 0.5 | V | 3 | ||
| CE input current | ICE | 1 | μA | VCE=0V to VIN | 3 | ||
| Ripple rejection ratio | PSRR | 40 | dB | IOUT=10mA, VIN=VCE=6.0V+1Vp-p AC, f=1kHz | 3 | ||
| Output voltage temperature coefficient | ΔVOUT/(ΔTa·VOUT) | -270 | 270 | ppm/℃ | VIN=VCE=6V, IOUT=10mA, 0℃≤Ta≤60℃ | 3 | |
| Input voltage | VIN | 1.8 | 15 | V | 3 | ||
| Input voltage (abs max) | VIN | 16 | V | 2 | |||
| Output current (abs max) | IOUT | 150 | mA | 2 | |||
| Power dissipation | PD | 250 | mW | 2 | |||
| Operating temperature range | TOPR | -40 | 125 | ℃ | 2 | ||
| Storage temperature range | TSTG | -40 | 150 | ℃ | 2 | ||
| Soldering temperature | 260 | ℃ | 4 sec | 2 |
CAD (KiCad official)
- Symbol:
HLP2980IM5X-5.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
hlp2980im5x-5-0-etched.step/hlp2980im5x-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlp2980im5x-5-0.step/hlp2980im5x-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (7 pp, sha256
d9fd0b2f1d120726, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).