main
Ray
Publish 0.1.0
b31ab71
HLK-10M15L
HI-LINK · AC-DC Power Modules · DIP-4
HLK-10M15L from HI-LINK, in a DIP-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AC | power_in | AC input terminal, rated 100-240Vac (range 85-264Vac or 70-350Vdc), with a recommended 1A/250Vac slow-blow fuse. |
| 2 | AC | power_in | AC input terminal, rated 100-240Vac (range 85-264Vac or 70-350Vdc), with a recommended varistor 10D561K and 0.1uF/275Vac safety capacitor. |
| 3 | -V0 | power_out | Negative DC output (return) of the 15V module, rated 660mA with short-circuit protection and automatic recovery. |
| 4 | +V0 | power_out | Positive 15V DC output, rated 660mA (short-time max ≥800mA), 15±0.2V at full load, ripple and noise ≤150mVp-p. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HI-LINK |
| Package | DIP-4 |
| Category | Power Modules |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Short time maximum output current | 800 | mA | ≥800 | 9 | |||
| Rated output current | 660 | mA | 9 | ||||
| Voltage regulation | -0.2 | 0.2 | % | 9 | |||
| Load regulation | -0.5 | 0.5 | % | 9 | |||
| Input low voltage efficiency | 80 | % | Vin=115Vac, Output full load | 9 | |||
| Input high voltage efficiency | 80 | % | Vin=230Vac, Output full load | 9 | |||
| Output ripple and noise | 150 | mV | Rated input voltage, output full load. With 20MHz bandwidth oscilloscope, Load side 10uF and 0.1uF capacitance test | 9 | |||
| Switching on/off overshoot amplitude | 5 | %VO | Rated input voltage, output plus 10% load | 9 | |||
| Output over-current protection | 110 | 130 | % | Output maximum load | 9 | ||
| Input voltage range (AC) | 85 | 264 | Vac | 4 | |||
| Input voltage range (DC) | 70 | 350 | Vdc | 4 | |||
| Rated input voltage | 100 | 240 | Vac | 4 | |||
| Maximum input current | 0.3 | A | Tested at room temperature | 4 | |||
| Input inrush current | 34 | A | Tested at room temperature | 4 | |||
| Input low start | 50 | mS | Tested at room temperature | 4 | |||
| Working temperature | -25 | 60 | ℃ | 4 | |||
| Storage temperature | -40 | 80 | ℃ | 4 | |||
| Relative humidity | 5 | 95 | % | 4 | |||
| Atmospheric pressure | 80 | 106 | Kpa | 4 | |||
| Altitude | 2000 | m | 4 |
CAD (KiCad official)
- Symbol:
HLK-10M15L - Footprint:
Package_DIP:DIP-4_W7.62mm - 3D model: DIP-4 (KiCad packages3D, STEP)
- 3D model files:
hlk-10m15l-etched.step/hlk-10m15l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlk-10m15l.step/hlk-10m15l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HI-LINK datasheet (14 pp, sha256
24e355796f07ee8d, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HLK-10M15L
**HI-LINK** · AC-DC Power Modules · DIP-4
HLK-10M15L from HI-LINK, in a DIP-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AC | power_in | AC input terminal, rated 100-240Vac (range 85-264Vac or 70-350Vdc), with a recommended 1A/250Vac slow-blow fuse. |
| 2 | AC | power_in | AC input terminal, rated 100-240Vac (range 85-264Vac or 70-350Vdc), with a recommended varistor 10D561K and 0.1uF/275Vac safety capacitor. |
| 3 | -V0 | power_out | Negative DC output (return) of the 15V module, rated 660mA with short-circuit protection and automatic recovery. |
| 4 | +V0 | power_out | Positive 15V DC output, rated 660mA (short-time max ≥800mA), 15±0.2V at full load, ripple and noise ≤150mVp-p. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HI-LINK |
| Package | DIP-4 |
| Category | Power Modules |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Short time maximum output current | | 800 | | | mA | ≥800 | 9 |
| Rated output current | | | 660 | | mA | | 9 |
| Voltage regulation | | -0.2 | | 0.2 | % | | 9 |
| Load regulation | | -0.5 | | 0.5 | % | | 9 |
| Input low voltage efficiency | | 80 | | | % | Vin=115Vac, Output full load | 9 |
| Input high voltage efficiency | | 80 | | | % | Vin=230Vac, Output full load | 9 |
| Output ripple and noise | | | | 150 | mV | Rated input voltage, output full load. With 20MHz bandwidth oscilloscope, Load side 10uF and 0.1uF capacitance test | 9 |
| Switching on/off overshoot amplitude | | | | 5 | %VO | Rated input voltage, output plus 10% load | 9 |
| Output over-current protection | | 110 | | 130 | % | Output maximum load | 9 |
| Input voltage range (AC) | | 85 | | 264 | Vac | | 4 |
| Input voltage range (DC) | | 70 | | 350 | Vdc | | 4 |
| Rated input voltage | | 100 | | 240 | Vac | | 4 |
| Maximum input current | | | | 0.3 | A | Tested at room temperature | 4 |
| Input inrush current | | | | 34 | A | Tested at room temperature | 4 |
| Input low start | | | | 50 | mS | Tested at room temperature | 4 |
| Working temperature | | -25 | | 60 | ℃ | | 4 |
| Storage temperature | | -40 | | 80 | ℃ | | 4 |
| Relative humidity | | 5 | | 95 | % | | 4 |
| Atmospheric pressure | | 80 | | 106 | Kpa | | 4 |
| Altitude | | | | 2000 | m | | 4 |
## CAD (KiCad official)
- Symbol: `HLK-10M15L`
- Footprint: `Package_DIP:DIP-4_W7.62mm`
- 3D model: DIP-4 (KiCad packages3D, STEP)
- 3D model files: `hlk-10m15l-etched.step` / `hlk-10m15l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hlk-10m15l.step` / `hlk-10m15l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HI-LINK datasheet](docs/hlk-10m15l-datasheet.pdf) (14 pp, sha256 `24e355796f07ee8d`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hlk-10m15l-datasheet.pdf)