Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HK32F031C6T6

HK · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

HK32F031C6T6 from HK, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply (1.8-5.5V) that powers the RTC, LSE oscillator and backup registers when VDD is off.
2 PC13 bidirectional General-purpose I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2.
3 PC14 bidirectional General-purpose I/O with additional function OSC32_IN (32.768kHz LSE oscillator input).
4 PC15 bidirectional General-purpose I/O with additional function OSC32_OUT (32.768kHz LSE oscillator output).
5 PF0 bidirectional General-purpose I/O with alternate function I2C1_SDA and additional function OSC_IN (HSE oscillator input).
6 PF1 bidirectional General-purpose I/O with alternate function I2C1_SCL and additional function OSC_OUT (HSE oscillator output).
7 NRST bidirectional Reset input / internal reset output, active low.
8 VSSA power_in Analog ground.
9 VDDA power_in Analog power supply (2.0-5.5V) for the ADC and temperature sensor analog parts.
10 PA0 bidirectional General-purpose I/O with TIM2_CH1, TIM2_ETR, USART1_CTS, ADC_IN0, RTC_TAMP2 and WKUP1.
11 PA1 bidirectional General-purpose I/O with TIM2_CH2, EVENTOUT, USART1_RTS and ADC_IN1.
12 PA2 bidirectional General-purpose I/O with TIM2_CH3, USART1_TX and ADC_IN2.
13 PA3 bidirectional General-purpose I/O with TIM2_CH4, USART1_RX and ADC_IN3.
14 PA4 bidirectional General-purpose I/O with SPI1_NSS, I2S1_WS, TIM14_CH1, USART1_CK and ADC_IN4.
15 PA5 bidirectional General-purpose I/O with SPI1_SCK, I2S1_CK, TIM2_CH1, TIM2_ETR and ADC_IN5.
16 PA6 bidirectional General-purpose I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT, ADC_IN6 and WKUP10.
17 PA7 bidirectional General-purpose I/O with SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT, MCO, ADC_IN7 and WKUP11.
18 PB0 bidirectional General-purpose I/O with TIM3_CH3, TIM1_CH2N, EVENTOUT and ADC_IN8.
19 PB1 bidirectional General-purpose I/O with TIM3_CH4, TIM14_CH1, TIM1_CH3N and ADC_IN9.
20 PB2 bidirectional General-purpose I/O with alternate function I2C1_SMBA.
21 PB10 bidirectional General-purpose I/O with TIM2_CH3 and I2C1_SCL.
22 PB11 bidirectional General-purpose I/O with TIM2_CH4, EVENTOUT and I2C1_SDA.
23 VSS power_in Digital ground.
24 VDD power_in Digital power supply (2.0-5.5V) for the I/O pins and internal LDO.
25 PB12 bidirectional General-purpose I/O with TIM1_BKIN, EVENTOUT, SPI1_NSS and I2S1_WS.
26 PB13 bidirectional General-purpose I/O with TIM1_CH1N, SPI1_SCK and I2S1_CK.
27 PB14 bidirectional General-purpose I/O with TIM1_CH2N, SPI1_MISO and I2S1_MCK.
28 PB15 bidirectional General-purpose I/O with TIM1_CH3N, SPI1_MOSI, I2S1_SD and RTC_REFIN.
29 PA8 bidirectional General-purpose I/O with USART1_CK, TIM1_CH1, EVENTOUT and MCO.
30 PA9 bidirectional General-purpose I/O with USART1_TX, TIM1_CH2, I2C1_SCL, MCO and WKUP12.
31 PA10 bidirectional General-purpose I/O with USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA and WKUP13.
32 PA11 bidirectional General-purpose I/O with USART1_CTS, TIM1_CH4 and EVENTOUT.
33 PA12 bidirectional General-purpose I/O with USART1_RTS, TIM1_ETR and EVENTOUT.
34 PA13 bidirectional General-purpose I/O with IR_OUT and SWDIO (serial wire debug data).
35 PF6 bidirectional General-purpose I/O with alternate function I2C1_SCL.
36 PF7 bidirectional General-purpose I/O with alternate function I2C1_SDA.
37 PA14 bidirectional General-purpose I/O with USART1_TX and SWCLK (serial wire debug clock).
38 PA15 bidirectional General-purpose I/O with SPI1_NSS, I2S1_WS, TIM2_CH1, TIM2_ETR, EVENTOUT and USART1_RX.
39 PB3 bidirectional General-purpose I/O with SPI1_SCK, I2S1_CK, TIM2_CH2 and EVENTOUT.
40 PB4 bidirectional General-purpose I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1, EVENTOUT and TIM17_BKIN.
41 PB5 bidirectional General-purpose I/O with SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN and TIM3_CH2.
42 PB6 bidirectional General-purpose I/O with I2C1_SCL, USART1_TX and TIM16_CH1N.
43 PB7 bidirectional General-purpose I/O with I2C1_SDA, USART1_RX and TIM17_CH1N.
44 Boot0 input Boot memory selection input.
45 PB8 bidirectional General-purpose I/O with I2C1_SCL and TIM16_CH1.
46 PB9 bidirectional General-purpose I/O with I2C1_SDA, IR_OUT, TIM17_CH1 and EVENTOUT.
47 VSS power_in Digital ground.
48 VDD power_in Digital power supply (2.0-5.5V) for the I/O pins and internal LDO.

Key specifications

Parameter Value
Manufacturer HK
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (incl. VDDA) VDD-VSS -0.5 6 V 26
Voltage difference between supply pins /ΔVDDx/ 50 mV 26
Voltage difference between ground pins /VSSX−VSS/ 50 mV 26
Total current through VDD/VDDA IVDD 150 mA supply current 26
Total current out of VSS IVSS 150 mA output current 26
Output sink current on any I/O and control pin IIO 25 mA sink 26
Output source current on any I/O and control pin IIO -25 mA source 26
Injected current on a pin IINJ(PIN) -5 5 mA 26
Total injected current on all I/O and control pins ΣIINJ(PIN) -25 25 mA 26
Storage temperature range TSTG -45 150 °C 26
Maximum junction temperature TJ 125 °C 26
Internal AHB clock frequency fHCLK 0 72 MHz 27
Internal APB1 clock frequency fPCLK1 0 72 MHz 27
Internal APB2 clock frequency fPCLK2 0 72 MHz 27
Standard operating voltage VDD 2 5.5 V 27
Analog operating voltage VDDA 2 5.5 V 27
Backup domain operating voltage VBAT 1.8 5.5 V 27
Operating temperature T -40 105 °C 27
Power-on reset setup time Tdelay rstn 40 us 27
Reset threshold VThreshold 1.75 V 27
PVD level, rising edge VPVD 2.183 2.188 2.196 V PLS[2:0]=000 27
PVD level, rising edge VPVD 2.958 2.969 2.979 V PLS[2:0]=111 27
PVD level, falling edge VPVD 2.116 2.119 2.125 V PLS[2:0]=000 27
PVD level, falling edge VPVD 2.798 2.805 2.817 V PLS[2:0]=111 27
External HSE clock frequency fHSE_ext 1 8 25 MHz 28
HSE high/low time Tw(HSE) 5 ns 28
HSE rise/fall time Tr(HSE)/Tf(HSE) 20 ns 28
HSE duty cycle DuCy(HSE) 45 55 % 28
External LSE clock frequency FLSE_ext 32.768 1000 kHz 28
LSE high/low time Tw(LSE) 450 ns 29
LSE rise/fall time Tr(LSE)/Tf(LSE) 50 ns 29
LSE duty cycle DuCy(LSE) 30 70 % 29
HSI clock frequency fHSI 8 MHz 29
HSI duty cycle DuCy(HSI) 45 55 % 29
HSI accuracy, factory calibrated ACCHSI -2 2.5 % TA= -40 to 105 °C 29
HSI accuracy, factory calibrated ACCHSI -1.5 2.2 % TA= -40 to 85 °C 29
HSI accuracy, factory calibrated ACCHSI -1.1 1.8 % TA = 25 °C 29
HSI startup time Tsu(HSI) 1 2 us VSS≤VIN≤VDD 29
HSI oscillator power consumption IDD(HSI) 80 100 uA 29
LSI clock frequency fLSI 30 40 60 kHz 29
LSI startup time tsu(LSI) 85 us 29
PLL input clock frequency fPLL_IN 1 8 25 MHz 29
PLL output clock frequency fPLL_OUT 16 72 MHz 29
PLL lock time tLOCK 200 us 29
PLL cycle jitter Jitter 300 ps 29
Flash byte program time TPROG 6 7.5 µs 30
Flash page erase time TERASE 4 5 ms 30
Flash chip erase time TERASE 30 40 ms 30
Flash read current IDDREAD 2 3 mA @24MHz 30
Input leakage current Ilkg 3 uA VIN =5V 30
Weak pull-up equivalent resistor RPU 30 40 50 KΩ VIN=VSS 30
Weak pull-down equivalent resistor RPD 30 40 50 KΩ VIN=VDD 30
I/O pin capacitance CIO 5 pF 30
Analog supply voltage (ADC) 2 3.3 5.5 V 31
ADC DNL DNL -1 1 LSB 32
ADC INL INL -1.5 1.5 LSB 32
ADC offset error -16 16 LSB 32
Temp sensor output voltage at 25℃ 1.34 1.43 1.52 V 32
Temp sensor gain 4 4.3 4.6 mV/℃ 32

CAD (KiCad official)

  • Symbol: HK32F031C6T6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: hk32f031c6t6-etched.step / hk32f031c6t6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hk32f031c6t6.step / hk32f031c6t6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HK datasheet (55 pp, sha256 e942f8805062c89a, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF