Generated by kicad-footprint-generator · KiCad file format 20260206
HK32F030MF4P6 EVB
HK · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
HK32F030MF4P6 EVB from HK, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD4 | bidirectional | General-purpose I/O PD4, default function PD4 after reset, AF0 function I2C1_SMBA. |
| 2 | PD5/SWDIO/AIN0 | bidirectional | I/O whose default function after reset is SWDIO (AF0 SWDIO), also shared with PD5 and ADC analog input AIN0. |
| 3 | PD6/AIN1 | bidirectional | General-purpose I/O PD6, default function PD6, shared with ADC analog input AIN1. |
| 4 | NRST | input | External reset input, default function NRST, with an internal pull-up resistor (50 kΩ max) so external circuitry is optional. |
| 5 | PA1/EXTCLK1 | bidirectional | General-purpose I/O PA1, default function PA1, also usable as GPIO external clock input EXTCLK1 (1 to 32 MHz). |
| 6 | PA2 | bidirectional | General-purpose I/O PA2, default function PA2, AF0 function I2C1_SMBA. |
| 7 | VSS/VSSA | power_in | Digital and analog ground, connected together on the chip. |
| 8 | VCAP | passive | Default function is NC, floating; TSSOP20 does not provide the EXTCLK2 function. |
| 9 | VDD/VDDA | power_in | Digital and analog supply connected together on the chip, operating range 1.8 V to 3.6 V. |
| 10 | PA3 | bidirectional | General-purpose I/O PA3, default function PA3. |
| 11 | PB5/SWCLK/EXTCLK3 | bidirectional | I/O whose default function is SWCLK, selectable as I2C1_SDA via extra register, also usable as EXTCLK3 clock input. |
| 12 | PB4 | bidirectional | General-purpose I/O PB4, default function PB4, AF0 function I2C1_SCL. |
| 13 | PC3 | bidirectional | General-purpose I/O PC3, default function PC3. |
| 14 | PC4/AIN2 | bidirectional | General-purpose I/O PC4, default function PC4, shared with ADC analog input AIN2. |
| 15 | PC5/EXTCLK4 | bidirectional | I/O PC5, AF0 function I2C1_SDA, also usable as EXTCLK4 clock input. |
| 16 | PC6 | bidirectional | General-purpose I/O PC6, AF0 function I2C1_SCL. |
| 17 | PC7 | bidirectional | General-purpose I/O PC7, default function PC7. |
| 18 | PD1 | bidirectional | General-purpose I/O PD1, AF0 function I2C1_SMBA. |
| 19 | PD2/AIN4 | bidirectional | General-purpose I/O PD2, default function PD2, shared with ADC analog input AIN4. |
| 20 | PD3/AIN3 | bidirectional | General-purpose I/O PD3, default function PD3, shared with ADC analog input AIN3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HK |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD-VSS (absolute max) | VDD-VSS | -0.5 | 4 | V | External main supply voltage (including VDDA and VDD) | 23 | |
| Input voltage on pin | VIN | 4 | V | VSS - 0.3 to VDD + 4.0 | 23 | ||
| Voltage difference between supply pins | /ΔVDDx/ | 50 | mV | 23 | |||
| Voltage difference between ground pins | /VSSX − VSS/ | 50 | mV | 23 | |||
| Total current into VDD/VDDA | IVDD | 150 | mA | Supply current | 23 | ||
| Total current out of VSS | IVSS | 150 | mA | Sink current | 23 | ||
| Output sink current per I/O | IIO | 25 | mA | Any I/O and control pin sink | 23 | ||
| Output source current per I/O | IIO | -25 | mA | Any I/O and control pin source | 23 | ||
| Injected current per pin | IINJ(PIN) | -5 | 5 | mA | 23 | ||
| Total injected current | ΣIINJ(PIN) | -25 | 25 | mA | All I/O and control pins | 23 | |
| Storage temperature | TSTG | -45 | 150 | °C | 23 | ||
| Maximum junction temperature | TJ | 125 | °C | 23 | |||
| AHB clock frequency | fHCLK | 0 | 32 | MHz | 24 | ||
| APB clock frequency | fPCLK | 0 | 32 | MHz | 24 | ||
| Operating voltage | VDD/VDDA | 1.8 | 3.6 | V | 24 | ||
| Operating temperature | T | -40 | 85 | °C | 24 | ||
| POR reset setup time | Tdelay | 40 | μs | 24 | |||
| POR reset threshold | VThreshold | 1.75 | V | 24 | |||
| POR/PDR threshold falling edge | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 24 |
| POR/PDR threshold rising edge | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 24 |
| PDR hysteresis | VPDRhyst | 40 | mV | 24 | |||
| Reset time | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 24 | |
| Internal reference voltage | VREFINT | 0.8 | V | -40 ~ 85°C | 24 | ||
| Run mode current, APB enabled | 2.599 | 2.704 | mA | VDD=3.3V, HCLK=HSI 32 MHz, 1 wait state, APB clock enabled; typ 25°C, max 85°C | 24 | ||
| Run mode current, APB disabled | 2.338 | 2.501 | mA | VDD=3.3V, HCLK=HSI 32 MHz, 1 wait state, APB clock disabled; typ 25°C, max 85°C | 24 | ||
| Run mode current, LSI | 1.711 | 1.822 | mA | VDD=3.3V, HCLK=LSI 114 kHz; typ 25°C, max 85°C | 25 | ||
| Sleep mode current | 1.197 | 1.477 | mA | VDD=3.3V, HCLK=HSI 32 MHz, APB disabled; typ 25°C, max 85°C | 25 | ||
| Deep Sleep mode current | 0.613 | 0.728 | mA | VDD=3.3V, HCLK=HSI 32 MHz, APB disabled; typ 25°C, max 85°C | 25 | ||
| Stop mode current, AWU + LDO low power | 34.08 | 213.6 | μA | VDD=3.3V; typ 25°C, max 85°C | 25 | ||
| Stop mode current, LDO low power | 30.12 | 210.44 | μA | VDD=3.3V; typ 25°C, max 85°C | 25 | ||
| HSI clock frequency | fHSI | 32 | MHz | 25 | |||
| HSI duty cycle | DuCy(HSI) | 45 | 55 | % | 25 | ||
| HSI accuracy, factory calibrated | ACC | -1 | 1 | % | Factory calibration, TA= -40 ~ +85°C | 25 | |
| HSI startup time | Tsu(HSI) | 1 | 2 | μs | VSS ≤ VIN ≤ VDD | 25 | |
| HSI oscillator power consumption | IDD(HSI) | 80 | 100 | μA | 25 | ||
| LSI clock frequency | fLSI | 114 | kHz | 25 | |||
| LSI duty cycle | DuCy(LSI) | 45 | 55 | % | 25 | ||
| LSI accuracy | ACC | 1.5 | 2.2 | % | Factory default: TA=-40 ~+85 °C | 25 | |
| LSI startup time | Tsu(LSI) | 1 | 2 | μs | VSS ≤ VIN ≤ VDD | 25 | |
| LSI oscillator power consumption | IDD(LSI) | 80 | 100 | μA | 25 | ||
| External input clock frequency | Fext | 1 | 8 | 32 | MHz | 25 | |
| External input clock duty cycle | 40 | 60 | % | 25 | |||
| Cycle jitter | Jitter | 300 | ps | 25 | |||
| Page erase time | TERASE | 30 | 40 | 50 | ms | 26 | |
| Byte program current | IDDPROG | 5 | mA | 26 | |||
| Erase current | IDDERASE | 2 | mA | Page/chip erase | 26 | ||
| Flash endurance | NEND | 100 | kcycles | 26 | |||
| Data retention | tRET | 10 | years | 26 | |||
| Input high voltage | VIH | 1.65 | V | VDD = 3.3 V; 1.65 without Schmitt trigger, 1.75 with Schmitt trigger | 26 | ||
| Input low voltage | VIL | -0.3 | 1.6 | V | VDD = 3.3 V; 1.60 with Schmitt trigger, 1.45 without | 26 | |
| Schmitt trigger hysteresis | Vhys | 450 | mV | VDD = 3.3 V | 26 | ||
| Input leakage current | Ilkg | 3 | μA | VIN = 3.3 V | 26 | ||
| Pull-up resistor | RPU | 30 | 40 | 50 | KΩ | VIN = VSS | 26 |
| Pull-down resistor | RPD | 30 | 40 | 50 | KΩ | VIN = VDD | 26 |
| I/O pin capacitance | CIO | 5 | pF | 26 | |||
| Output low voltage | VOL | 0 | 0.8 | V | VDD=3.3V IOL=-8mA | 26 | |
| Output high voltage | VOH | 2.4 | 3.3 | V | VDD=3.3V IOH=8mA | 26 | |
| NRST input low voltage | VIL | 0.8 | V | 27 | |||
| NRST input high voltage | VIH | 2 | V | 27 | |||
| NRST Schmitt trigger hysteresis | Vhys | 200 | mV | 27 | |||
| NRST internal weak pull-up | Rpull | 50 | K | 27 | |||
| ADC supply voltage | VDD | 2 | 3.3 | 3.6 | V | 28 | |
| ADC clock frequency | fADC | 0.6 | 14 | MHz | 28 | ||
| ADC sampling rate | fS | 0.05 | 1 | MHz | 28 | ||
| External input impedance | RAIN | 50 | kΩ | 28 | |||
| Sampling switch resistance | RADC | 1 | kΩ | 28 |
CAD (KiCad official)
- Symbol:
HK32F030MF4P6 EVB - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
hk32f030mf4p6-evb-etched.step/hk32f030mf4p6-evb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hk32f030mf4p6-evb.step/hk32f030mf4p6-evb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HK datasheet (45 pp, sha256
468ed189f322dea3, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).