main
Ray Publish 0.1.1 85dbe12
{
  "schema_version": 1,
  "type": "component",
  "slug": "hk32c030f8p7",
  "title": "HK32C030F8P7",
  "brief": "HK Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "hk32c030f8p7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "HK32C030F8P7",
    "manufacturer": "HK",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/34426c8c9bb7ef7af1c37523f42c13ca.pdf",
    "parts": {
      "symbol": "hk32c030f8p7.kicad_sym",
      "footprint": "hk32c030f8p7.kicad_mod",
      "model_3d": "hk32c030f8p7-hero.glb",
      "model_3d_plain": "hk32c030f8p7.glb",
      "model_3d_step": "hk32c030f8p7-etched.step",
      "model_3d_step_plain": "hk32c030f8p7.step",
      "lbr": "hk32c030f8p7.lbr"
    },
    "distributor_links": {
      "lcsc": "C19631591"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T19:42:19Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PF8/BOOT0/AIN21",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO that is BOOT0 after reset, with TIM1_CH2, TIM14_CH1, SPI2_SCK, I2C2_SCL, UART2_RX, UART3_TX, EXTI8 and ADC input AIN21."
      },
      {
        "number": "2",
        "name": "PF0/OSC_IN",
        "type": "bidirectional",
        "description": "GPIO (PF0 after reset) that is also the HSE oscillator input OSC_IN, with TIM14_CH1, I2C1_SDA and EXTI0."
      },
      {
        "number": "3",
        "name": "PF1/OSC_OUT",
        "type": "bidirectional",
        "description": "GPIO (PF1 after reset) that is also the HSE oscillator output OSC_OUT, with TIM3_CH1, I2C1_SCL and EXTI1."
      },
      {
        "number": "4",
        "name": "NRST",
        "type": "bidirectional",
        "description": "Active-low system reset I/O with internal pull-up, 5V tolerant, where input low pulses up to 70 ns are ignored."
      },
      {
        "number": "5",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply, operating range 2.6 V to 5.5 V, which may be lower than VDD."
      },
      {
        "number": "6",
        "name": "PA0/AIN0",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with TIM2_CH1_ETR, UART1_RX, EXTI0, ADC input AIN0 and RTC_TAMP2."
      },
      {
        "number": "7",
        "name": "PA1/AIN1",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with CM0_TXEV, TIM2_CH2, UART1_TX, TIM15_CH1N, EXTI1 and ADC input AIN1."
      },
      {
        "number": "8",
        "name": "PA2/AIN2",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with TIM15_CH1, UART1_TX, TIM2_CH3, UART2_TX, EXTI2 and ADC input AIN2."
      },
      {
        "number": "9",
        "name": "PA3/AIN3",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with TIM15_CH2, UART1_RX, TIM2_CH4, UART2_RX, I2C1_SCL, I2C2_SCL, EXTI3 and ADC input AIN3."
      },
      {
        "number": "10",
        "name": "PA4/AIN4",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with SPI1_NSS, TIM14_CH1, I2C1_SDA, I2C2_SDA, EXTI4 and ADC input AIN4."
      },
      {
        "number": "11",
        "name": "PA5/AIN5",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with SPI1_SCK, TIM2_CH1_ETR, I2C1_SDA, UART1_TX, I2C2_SDA, EXTI5 and ADC input AIN5."
      },
      {
        "number": "12",
        "name": "PA6/AIN6",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with SPI1_MISO, TIM3_CH1, TIM1_BKIN, I2C1_SCL, TIM16_CH1, CM0_TXEV, EXTI6 and ADC input AIN6."
      },
      {
        "number": "13",
        "name": "PA7/AIN7",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with SPI1_MOSI, TIM3_CH2, TIM1_CH1N, IRTIM_IROUT, TIM14_CH1, TIM17_CH1, RCC_MCO, EXTI7 and ADC input AIN7."
      },
      {
        "number": "14",
        "name": "PB1/AIN9",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with TIM14_CH1, TIM3_CH4, TIM1_CH3N, SPI1_MOSI, SPI2_MOSI, EXTI1 and ADC input AIN9."
      },
      {
        "number": "15",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply, operating range 2.6 V to 5.5 V."
      },
      {
        "number": "17",
        "name": "PA9",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with TIM15_BKIN, UART1_TX, TIM1_CH2, SPI1_MISO, I2C1_SCL, RCC_MCO, SPI2_MOSI, UART3_RX, I2C2_SCL, TIM14_CH1 and EXTI9."
      },
      {
        "number": "18",
        "name": "PA10",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO with TIM17_BKIN, UART1_RX, TIM1_CH3, SPI1_MOSI, I2C1_SDA, TIM15_CH1, SPI2_SCK, UART3_TX, I2C2_SDA and EXTI10."
      },
      {
        "number": "19",
        "name": "PA13/SWDIO",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO that is the SWDIO debug data pin after reset, with IRTIM_IROUT, TIM2_CH1_ETR, TIM17_CH1, SPI1_SCK, SPI2_MOSI, I2C1_SCL, I2C2_SCL and EXTI13."
      },
      {
        "number": "20",
        "name": "PA14/SWCLK/AIN13",
        "type": "bidirectional",
        "description": "5V-tolerant GPIO that is the SWCLK debug clock pin after reset, with UART1_TX, TIM1_CH1, I2C1_SDA, I2C2_SDA, SPI2_MISO, UART3_TX, UART2_TX, EXTI14 and ADC input AIN13."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: TSSOP20 has a single ground pin (15) and no separate VSSA pin in Table 6-1; the datasheet gives no f"
        ],
        "pages_sent": 48,
        "cost_usd": 0.5465,
        "at": "2026-11-02T19:41:42"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/34426c8c9bb7ef7af1c37523f42c13ca.pdf",
        "pages": 59,
        "sha256": "7a421603db583fc2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hk32c030f8p7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hk32c030f8p7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "88aa2fbc57f07e2026ad007a91bcb807019255474b85be3c051686a249852d6b",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "TSSOP20",
      "source_page": 53,
      "D": {
        "nom_mm": 6.5,
        "range_mm": [
          6.4,
          6.6
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "hk32c030f8p7.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HK",
      "Package": "TSSOP-20",
      "Category": "Single Chip Microcomputer/Microcontroller",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "hk32c030f8p7"
  ],
  "discovery_pitch": "HK32C030F8P7 (HK) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hk32c030f8p7.kicad_sym",
    "hk32c030f8p7.kicad_mod",
    "hk32c030f8p7.glb",
    "hk32c030f8p7.step",
    "hk32c030f8p7.lbr",
    "docs/hero.png",
    "docs/hk32c030f8p7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hk32c030f8p7-hero.glb",
    "hk32c030f8p7-hero.overlay.json",
    "hk32c030f8p7-etched.glb",
    "hk32c030f8p7-etched.step"
  ],
  "visibility": "public",
  "description": "HK Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}