main
Ray Publish 0.1.2 827b0f1
{
  "slug": "hk24c04h-usr-b",
  "version": "0.1.2",
  "type": "component",
  "description": "HK EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "hk24c04h-usr-b",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "hk24c04h-usr-b.kicad_sym",
    "hk24c04h-usr-b.kicad_mod",
    "hk24c04h-usr-b.glb",
    "hk24c04h-usr-b.step",
    "hk24c04h-usr-b.lbr",
    "docs/hero.png",
    "docs/hk24c04h-usr-b-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "hk24c04h-usr-b-hero.glb",
    "hk24c04h-usr-b-hero.overlay.json",
    "hk24c04h-usr-b-etched.glb",
    "hk24c04h-usr-b-etched.step"
  ],
  "component": {
    "mpn": "HK24C04H-USR-B",
    "manufacturer": "HK",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/14424351dd4009bb4019df17df558d30.pdf",
    "parts": {
      "symbol": "hk24c04h-usr-b.kicad_sym",
      "footprint": "hk24c04h-usr-b.kicad_mod",
      "model_3d": "hk24c04h-usr-b-hero.glb",
      "model_3d_plain": "hk24c04h-usr-b-etched.glb",
      "model_3d_step": "hk24c04h-usr-b-etched.step",
      "model_3d_step_plain": "hk24c04h-usr-b.step",
      "lbr": "hk24c04h-usr-b.lbr"
    },
    "distributor_links": {
      "lcsc": "C33576248"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T06:35:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Device address input A0 is a chip select input that is typically hardwired to VIH or VIL, is internally recognized as VIL if left unconnected, and is not used for addressing on the HK24C04."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Device address input A1 is a chip select input hardwired to VIH or VIL that, together with A2, sets the device address from 00b to 11b for up to four devices on one bus."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Device address input A2 is a chip select input hardwired to VIH or VIL that, together with A1, sets the device address from 00b to 11b for up to four devices on one bus."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device, with input voltage on any pin specified relative to ground as -0.3V to VCC + 0.3V."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data line is a bi-directional open-drain signal that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input latches data into the EEPROM on its rising edge and clocks data out on its falling edge, with a Schmitt trigger and filtered input for noise protection."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write protect input: programming is allowed when left unconnected or at VIL and all programming is disabled when connected to VIH or VCC, with reads unaffected."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage for the HK24C04, specified at 1.8V to 5.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN HK24C04H-USR-B carries package code S in the ordering scheme (SOP8), so the 8-lead SOP pinout on; Section 5 states that only A2 and A1 are used for device addressing and that chip select pin A0 is n"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0164,
        "at": "2026-10-27T06:35:19"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/14424351dd4009bb4019df17df558d30.pdf",
        "pages": 17,
        "sha256": "00a2dcce23c75ff5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "hk24c04h-usr-b.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "hk24c04h-usr-b-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "63ef6071e7cf3a2ae5e7f795338c0f8f940b6459a69b91a1a07927b7b4b889f7",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}