main
Ray Publish 0.1.0 c7b8c92

HK24C04H-USR-B

HK · EEPROM · SOP-8

HK24C04H-USR-B from HK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input A0 is a chip select input that is typically hardwired to VIH or VIL, is internally recognized as VIL if left unconnected, and is not used for addressing on the HK24C04.
2 A1 input Device address input A1 is a chip select input hardwired to VIH or VIL that, together with A2, sets the device address from 00b to 11b for up to four devices on one bus.
3 A2 input Device address input A2 is a chip select input hardwired to VIH or VIL that, together with A1, sets the device address from 00b to 11b for up to four devices on one bus.
4 GND power_in Ground reference for the device, with input voltage on any pin specified relative to ground as -0.3V to VCC + 0.3V.
5 SDA bidirectional Serial data line is a bi-directional open-drain signal that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor.
6 SCL input Serial clock input latches data into the EEPROM on its rising edge and clocks data out on its falling edge, with a Schmitt trigger and filtered input for noise protection.
7 WP input Write protect input: programming is allowed when left unconnected or at VIL and all programming is disabled when connected to VIH or VCC, with reads unaffected.
8 VCC power_in Supply voltage for the HK24C04, specified at 1.8V to 5.5V.

Key specifications

Parameter Value
Manufacturer HK
Package SOP-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: HK24C04H-USR-B
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hk24c04h-usr-b-etched.step / hk24c04h-usr-b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hk24c04h-usr-b.step / hk24c04h-usr-b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HK datasheet (17 pp, sha256 00a2dcce23c75ff5, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF