main
Ray
Publish 0.1.0
8aae49e
HK2301
HICHON · Touch Sensors · SOT-23-6
HK2301 from HICHON, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q | output | CMOS output pin; sink current 10 mA at VDD=3V, VOL=0.6V and source current 2 mA at VDD=3V, VOH=2.4V. |
| 2 | VSS | power_in | Negative supply, connected to ground. |
| 3 | I | input | Sensor input port connected to the touch pad; sensitivity is adjustable with an external Cs capacitor of 1 to 50pF to VSS. |
| 4 | AHLB | input | Selects output active level: 0 (default) active high, 1 active low; has a 15K ohm pull-down resistor at VDD=3V. |
| 5 | VDD | power_in | Positive supply, operating range 2.4V to 5.5V. |
| 6 | TOG | input | Output mode select: 0 (default) direct output, 1 toggle (latched) output; has a 15K ohm pull-down resistor at VDD=3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HICHON |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD | VSS-0.3~VSS+5.5 | -0.3 | 5.5 | V | VDD (TA=25℃), relative to VSS | 2 | |
| Input voltage | VIN | -0.3 | 0.3 | V | VSS-0.3 to VDD+0.3V (TA=25℃); max is offset above VDD | 2 | |
| Operating ambient temperature | TOP | -40 | 85 | °C | 2 | ||
| Storage temperature | TSTG | -50 | 125 | °C | 2 | ||
| ESD | ESD | 2 | KV | 2 | |||
| Operating voltage | VDD | 2.4 | 3 | 5.5 | V | TA=25℃ | 3 |
| Operating current, low power mode | IOPL | 2 | 4 | μA | VDD=3V 低功耗模式(无负载) | 3 | |
| Operating current, fast mode | IOPF | 5 | 10 | μA | VDD=3V 快速模式(无负载) | 3 | |
| Input low voltage | VIL | 0 | 0.2 | VDD | 3 | ||
| Input high voltage | VIH | 0.8 | 1 | VDD | 3 | ||
| Output sink current | IOL | 10 | mA | VDD=3V, VOL=0.6V | 3 | ||
| Output source current | IOH | 2 | mA | VDD=3V, VOH=2.4V | 3 | ||
| Input pin pull-down resistance | RPL | 15 | kohm | VDD=3V(TOG、AHLB) | 3 | ||
| Output response time, fast mode | TR | 60 | mS | VDD=3V、快速模式 | 3 | ||
| Output response time, low power mode | TR | 220 | mS | VDD=3V、低功耗模式 | 3 | ||
| Sensitivity adjust capacitor | Cs | 1 | 50 | pF | external capacitor from touch pad to VSS | 3 |
CAD (KiCad official)
- Symbol:
HK2301 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
hk2301-etched.step/hk2301-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hk2301.step/hk2301.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HICHON datasheet (6 pp, sha256
422f46de5da48a4e, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HK2301
**HICHON** · Touch Sensors · SOT-23-6
HK2301 from HICHON, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q | output | CMOS output pin; sink current 10 mA at VDD=3V, VOL=0.6V and source current 2 mA at VDD=3V, VOH=2.4V. |
| 2 | VSS | power_in | Negative supply, connected to ground. |
| 3 | I | input | Sensor input port connected to the touch pad; sensitivity is adjustable with an external Cs capacitor of 1 to 50pF to VSS. |
| 4 | AHLB | input | Selects output active level: 0 (default) active high, 1 active low; has a 15K ohm pull-down resistor at VDD=3V. |
| 5 | VDD | power_in | Positive supply, operating range 2.4V to 5.5V. |
| 6 | TOG | input | Output mode select: 0 (default) direct output, 1 toggle (latched) output; has a 15K ohm pull-down resistor at VDD=3V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HICHON |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD | VSS-0.3~VSS+5.5 | -0.3 | | 5.5 | V | VDD (TA=25℃), relative to VSS | 2 |
| Input voltage | VIN | -0.3 | | 0.3 | V | VSS-0.3 to VDD+0.3V (TA=25℃); max is offset above VDD | 2 |
| Operating ambient temperature | TOP | -40 | | 85 | °C | | 2 |
| Storage temperature | TSTG | -50 | | 125 | °C | | 2 |
| ESD | ESD | | | 2 | KV | | 2 |
| Operating voltage | VDD | 2.4 | 3 | 5.5 | V | TA=25℃ | 3 |
| Operating current, low power mode | IOPL | | 2 | 4 | μA | VDD=3V 低功耗模式(无负载) | 3 |
| Operating current, fast mode | IOPF | | 5 | 10 | μA | VDD=3V 快速模式(无负载) | 3 |
| Input low voltage | VIL | 0 | | 0.2 | VDD | | 3 |
| Input high voltage | VIH | 0.8 | | 1 | VDD | | 3 |
| Output sink current | IOL | | 10 | | mA | VDD=3V, VOL=0.6V | 3 |
| Output source current | IOH | | 2 | | mA | VDD=3V, VOH=2.4V | 3 |
| Input pin pull-down resistance | RPL | | 15 | | kohm | VDD=3V(TOG、AHLB) | 3 |
| Output response time, fast mode | TR | | 60 | | mS | VDD=3V、快速模式 | 3 |
| Output response time, low power mode | TR | | 220 | | mS | VDD=3V、低功耗模式 | 3 |
| Sensitivity adjust capacitor | Cs | 1 | | 50 | pF | external capacitor from touch pad to VSS | 3 |
## CAD (KiCad official)
- Symbol: `HK2301`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `hk2301-etched.step` / `hk2301-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hk2301.step` / `hk2301.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HICHON datasheet](docs/hk2301-datasheet.pdf) (6 pp, sha256 `422f46de5da48a4e`, retrieved 2026-10-22, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hk2301-datasheet.pdf)